US CHINA TRADE WAR–TRUMP’S TRADE WAR, INCREASED US EXPORTS, SECTION 232 STEEL/ALUMINUM CASES, RETALIATION BY EC/CHINA, TPP??, SECTION 201 SOLAR CELLS CASE, TAXES AND TRADE, NEW AD, CVD, 337 CASES

TRADE IS A TWO WAY STREET

“PROTECTIONISM BECOMES DESTRUCTIONISM; IT COSTS JOBS”

PRESIDENT RONALD REAGAN, JUNE 28, 1986

TRADE IS A TWO WAY STREET

 

US CHINA TRADE WAR STEEL/ALUMINUM TARIFFS EXCLUSION NOTICE UPDATE MARCH 18, 2018

Dear Friends,

On March 8th, Trump issued his tariffs of 25% on imported steel and 10% on imported aluminum in the Section 232 National Cases.

Attached are two documents of interest.

Commerce just issued the atttached EXCLUSION FED REG STEEL AND ALUMINUM exclusion Federal Register notice for the Steel and Aluminum Section 232 Cases.

Two important points about exclusion requests.  First, there is no time limit.  Exclusion requests can be filed at any time, but they must be on specific forms.

Second, foreign producers and US importers need not apply.  The only entities that can request an exclusion are the actual US companies using the steel or aluminum in their production process.

The second document is the attached extensive two part retaliation list issued by the EC in response to the Steel and Aluminum tariffs.  TWO EU RETALIATION LISTS  The document speaks for itself and is very extensive covering numerous different US products exported to the EC.

According to the EU, Part A of the list includes products worth €2.8 billion, which the EU can target with tariffs of 25 percent at any moment after notifying the list to the WTO.

Part B lists those products which would be targeted only after three years. This is because WTO rules allow immediate retaliation only on that amount of trade for which EU steel exports to the U.S. have not increased over the past years.

If anyone has any questions about these documents, please feel free to contact me.

Best regards,

Bill Perry

US CHINA TRADE WAR STEEL AND ALUMINUM TARIFFS UPDATE MARCH 9, 2018

Dear Friends,

On March 8th, Trump issued his tariffs of 25% on imported steel and 10% on imported aluminum.

As explained below, there are some exceptions, but now let the retaliation trade games begin.

The chickens have come home to roost.  For too many years, the average American has not been educated on the benefits of trade.  With $2.3 trillion in US exports in 2017, the United States has a lot to lose in this trade war.

If anyone has any questions or wants additional information, please feel free to contact me at my e-mail address bill@harrisbricken.com.

Best regards,

Bill Perry

TRUMP’S STEEL AND ALUMINUM TARIFFS

On March 3, 2018, President Trump formally announced the imposition under Section 232, National Security law, of tariffs of 25% against Steel imports and 10% on Aluminum imports.  See the attached proclamations, Presidential Proclamation on Adjusting Imports of Aluminum into Presidential Proclamation on Adjusting Imports of Steel into th.

The tariffs will take effect March 23rd “with respect to goods entered, or withdrawn from warehouse for consumption and shall continue in effect, unless such actions are expressly reduced, modified, or terminated.”

The terms “entered, or withdrawn from warehouse for consumption” are Customs terms, which means if steel products have not been entered/imported or withdrawn from a Customs bonded warehouse by 12:01AM on March 23rd, the tariffs will apply to those goods.

A Customs bonded warehouse is where products are stored before entry/importation of the products, in this case, steel and aluminum products, into the United States.  So long as the Steel and Aluminum has been entered/imported into the US before March 23rd, it will be ok, but afterwards the products will be hit by a tariff.

The actual steel products covered by the tariff are:

  • For the purposes of this proclamation, “steel articles” are defined at the Harmonized Tariff Schedule (HTS) 6-digit level as: 7206.10 through 7216.50, 7216.99 through 7301.10, 7302.10, 7302.40 through 7302.90, and 7304.10 through 7306.90, including any subsequent revisions to these HTS

This probably means that all steel products will be covered, but (2) provides:

“In order to establish increases in the duty rate on imports of steel articles, subchapter III of chapter 99 of the HTSUS is modified as provided in the Annex to this proclamation. Except as otherwise provided in this proclamation, or in notices published pursuant to clause 3 of this proclamation, all steel articles imports specified in the Annex shall be subject to an additional 25 percent ad valorem rate of duty with respect to goods entered, or withdrawn from warehouse for consumption, on or after 12:01 a.m. eastern daylight time on March 23, 2018.

Emphasis added.

If this Steel case follows the recent Solar Cells 201 Proclamation process, we will not see the Annex until the Presidential Proclamation is published in the Federal Register in a few days.

But there are doorways for countries and companies to get their products out. For countries that have a “security relationship” with the United States, not Russia or China, they can negotiate a deal with the US.  As the Proclamation specifically states in paragraph 9:

Any country with which we have a security relationship is welcome to discuss with the United States alternative ways to address the threatened impairment of the national security caused by imports from that country. Should the United States and any such country arrive at a satisfactory alternative means to address the threat to the national security such that I determine that imports from that country no longer threaten to impair the national security, I may remove or modify the restriction on steel articles imports from that country and, if necessary, make any corresponding adjustments to the tariff as it applies to other countries as our national security interests require.

Also within 10 days of the Proclamation, Commerce is to come up with an exclusion process to get products out of the tariffs, if the products are not produced in the US and if the exclusion request is made by a US company affected by the Tariff.  Foreign companies need not apply, only their US importers and more importantly the US steel using customers can apply.   The Proclamation specifically states in subparagraphs 3 and 4:

“…..The Secretary . . . is hereby authorized to provide relief from the additional duties set forth in clause 2 of this proclamation for any steel article determined not to be produced in the United States in a sufficient and reasonably available amount or of a satisfactory quality and is also authorized to provide such relief based upon specific national security considerations. Such relief shall be provided for a steel article only after a request for exclusion is made by a directly affected party located in the United States.  , , ,

Within 10 days after the date of this proclamation, the Secretary shall issue procedures for the requests for exclusion described in clause 3 of this proclamation. . . .”

We probably will not know more about the exclusion process until Commerce publishes a notice in the Federal Register.

THE TRADE CHICKENS COME HOME TO ROOST

Although there is an out for negotiations, we can expect other countries, including China and the EC, to retaliate against the steel and aluminum tariffs issued by the US.

But the real lesson of these tariffs is the failure over many past Presidencies to educate the average American about the benefits of trade.  President Trump pushed on by Breitbart refers to free traders as globalists.  Apparently, any person who believes in free trade does so because he supports the interests of the World and not the United States.

But free traders are not globalists.  They strongly believe in free trade because that is in the interest of the United States and the average American.  Free trade has caused the US economy to grow multiple times creating millions of jobs for Americans.

The average American simply does not realize that the US exported in 2017 $2.3 trillion in goods and services, $1.5 trillion in goods.  Half of all agricultural products are exported and one third of Iowa corn is exported to Mexico.

Pundits who favor the tariffs point to the rust belt states of Michigan, Ohio, Pennsylvania and Wisconsin that voted for Trump, but ignore the agricultural states of Kansas, Iowa, Wyoming, North Dakota, South Dakota, Montana and many other states that voted for Trump.  These pundits ignore the farmers.

But of that $1.5 trillion in goods, only $132 billion was agricultural products, exports of industrial supplies and materials at $462 billion and exports of capital goods except automotive at $532 billion were much more important.  Exports of Automotive vehicles and parts at $157 billion, consumer goods at $197 billion and export of other goods at $62 billion were also very important.

See the article on my blog, www.uschinatradewar.com, “Trump and Many Americans Simply Do Not Realize How Much the US Exports” and the Commerce Department report on 2017 Imports and Exports attached to that article.

$2.3 trillion in US exports are a lot of jobs and if these tariffs are the first step to a global trade war, many Americans are going to be very badly hurt by Trump’s trade war.

MARCH 3, 2018 UPDATE

Dear Friends,

Trump has his trade war, but it is not just against China.  This trade war is the United States against the World.  On March 2nd President Trump announced tariffs of 25% on steel imports and 10% on aluminum imports under Section 232 National Security law.  Section 232, however, is not a trade exception, such as 201 or antidumping and countervailing duty cases, approved by the World  Trade Organization (“WTO”) so that gives the other countries  the right to retaliate and they will retaliate.

If anyone has any questions or wants additional information, please feel free to contact me at my e-mail address bill@harrisbricken.com.

Best regards,

Bill Perry

TRUMP’S TRADE WAR AGAINST THE WORLD

On March 1, 2018, President Trump announced that next week he will impose under Section 232, National Security law, tariffs of 25% against Steel imports and 10% on Aluminum imports.

Many countries around the World, including the EU, Canada, Mexico, China and other countries, immediately threatened trade retaliation against US exports.  Europe is talking about tariffs on US imports of Harley Davidson Motorcycles, Jack Daniels Bourbon and blue jeans.  China is talking tariffs on US agricultural exports, such a Sorghum Grain and Soybeans.

To see the advice the President is getting one has to look no further than the statements by USTR Robert Lighthizer on February 27th, on the Laura Ingraham show on Fox News stating that it was ridiculous to think that we were going to get into a trade war with China and other countries over the 232 cases.  But the reaction of numerous countries to Trump’s announcement of tariffs on Steel and Aluminum imports shows that Lighthizer’s statement was ridiculous.  Lighthizer is Trump’s principle advisor on trade laws and trade agreements, but this statement shows how Lighthizer truly misjudged the situation.

The major problem is that Lighthizer and Trump are focused on the trade deficits rather than the enormous size of US exports at $2.4 trillion.  With $2.4 trillion in exports, there is a lot of targets for retaliation.

Secretary Wilbur Ross states that steel tariffs are about jobs and security and simply leveling the playing field.  See https://www.bloomberg.com/news/videos/2018-03-02/wilbur-ross-says-steel-tariffs-are-about-jobs-and-security-video.

On March 2, 2018, Trump tweeted, “trade wars are good, and easy to win.”  But in wars be they trade wars or real wars, no one really wins everybody loses.

Both the Wall Street Journal and Investors Business Daily both disagree with the Trump trade war.  On March 2, 2018, the Wall Street Journal stated in an editorial entitled “Trump’s Tariff Folly, His tax on aluminum and steel will hurt the economy and his voters”, stated:

Donald Trump made the biggest policy blunder of his Presidency Thursday by announcing that next week he’ll impose tariffs of 25% on imported steel and 10% on aluminum. This tax increase will punish American workers, invite retaliation that will harm U.S. exports, divide his political coalition at home, anger allies abroad, and undermine his tax and regulatory reforms. The Dow Jones Industrial Average fell 1.7% on the news, as investors absorbed the self-inflicted folly.

Mr. Trump has spent a year trying to lift the economy from its Obama doldrums, with considerable success. Annual GDP growth has averaged 3% in the past nine months if you adjust for temporary factors, and on Tuesday the ISM manufacturing index for February came in at a gaudy 60.8. American factories are humming, and consumer and business confidence are soaring.

Apparently, Mr. Trump can’t stand all this winning. His tariffs will benefit a handful of companies, at least for a while, but they will harm many more. “We have with us the biggest steel companies in the United States. They used to be a lot bigger, but they’re going to be a lot bigger again,” Mr. Trump declared in a meeting Thursday at the White House with steel and aluminum executives.

No, they won’t. The immediate impact will be to make the U.S. an island of high-priced steel and aluminum. The U.S. companies will raise their prices to nearly match the tariffs while snatching some market share. The additional profits will flow to executives in higher bonuses and shareholders, at least until the higher prices hurt their steel- and aluminum-using customers. Then U.S. steel and aluminum makers will be hurt as well.

Mr. Trump seems not to understand that steel-using industries in the U.S. employ some 6.5 million Americans, while steel makers employ about 140,000. Transportation industries, including aircraft and autos, account for about 40% of domestic steel consumption, followed by packaging with 20% and building construction with 15%. All will have to pay higher prices, making them less competitive globally and in the U.S.

Instead of importing steel to make goods in America, many companies will simply import the finished product made from cheaper steel or aluminum abroad. Mr. Trump fancies himself the savior of the U.S. auto industry, but he might note that Ford Motor shares fell 3% Thursday and GM’s fell 4%. U.S. Steel gained 5.8%. Mr. Trump has handed a giant gift to foreign car makers, which will now have a cost advantage over Detroit. How do you think that will play in Michigan in 2020?

The National Retail Federation called the tariffs a “tax on American families,” who will pay higher prices for canned goods and even beer in aluminum cans. Another name for this is the Trump voter tax.

The economic damage will quickly compound because other countries can and will retaliate against U.S. exports. Not steel, but against farm goods, Harley-Davidson motorcycles, Cummins engines, John Deere tractors, and much more.

Foreign countries are canny enough to know how to impose maximum political pain on Republican Senators and Congressmen in an election year by targeting exports from their states and districts. Has anyone at the White House political shop thought this through?

Then there’s the diplomatic damage, made worse by Mr. Trump’s use of Section 232 to claim a threat to national security. In the process Mr. Trump is declaring a unilateral exception to U.S. trade agreements that other countries won’t forget and will surely emulate.

The national security threat from foreign steel is preposterous because China supplies only 2.2% of U.S. imports and Russia 8.7%. But the tariffs will whack that menace to world peace known as Canada, which supplies 16%. South Korea, which Mr. Trump needs for his strategy against North Korea, supplies 10%, Brazil 13% and Mexico 9%.

Oh, and Canada buys more American steel than any other country, accounting for 50% of U.S. steel exports. Mr. Trump is punishing our most important trading partner in the middle of a Nafta renegotiation that he claims will result in a much better deal. Instead he is taking a machete to America’s trade credibility. Why should Canada believe a word he says?

***

Mr. Trump announced his intentions Thursday, so there’s still time to reconsider. GOP Senators Orrin Hatch (Utah) and Ben Sasse (Nebraska) spoke up loudly against the tariffs, but a larger business and labor chorus is required. Mr. Trump is a bona fide protectionist so he won’t be dissuaded by arguments about comparative advantage. But perhaps he will heed the message from the falling stock market, and from the harm he will do to the economy, his voters, and his Presidency.

The Investors Business Daily followed suit stating in a March 2, 2018 editorial entitled “Sorry, Mr. President: Your Trade Protectionism Will Cost The U.S. Dearly”:

Trade: Protectionism is a political feel-good policy that does nothing for the economy. It’s a big cost with very few tangible benefits. That’s why President Trump has made a big mistake in imposing big tariffs on steel and aluminum.

We understand, of course, that President Trump feels beholden to his constituencies in the U.S. who have been hurt by foreign competition, particularly in basic industries like steel and aluminum. But the 25% tariff on steel and 10% tariff on aluminum that Trump seeks to impose will lead to higher prices for all, the loss of thousands of jobs and a political-crony windfall for a handful of big companies. . . .

We have no doubt that what Trump says is true. But if so, it should be remedied through trade talks, not a trade war.

And make no mistake: The broad nature of Trump’s tariffs, hitting all exporters to the U.S., will invite some kind of retaliation from those who’ve been hit.

Already, EU Commission President Jean-Claude Juncker is threatening to respond in kind: “We will not sit idly while our industry is hit with unfair measures that put thousands of European jobs at risk,” he said. “The European Union will react firmly and commensurately to defend our interests.” . . .

Beijing is already looking at imposing trade penalties on U.S. sales of sorghum there, and may soon also target our sales of soy, too. Meanwhile, India, emboldened by the U.S. turn toward protectionism, might use Trump’s moves as a reason to protect its own wheat and rice sectors from U.S. imports.

So the steel and aluminum industry’s gains will be the loss of others.

Trump’s justification for tariffs is “national security.” But, as some have pointed out, the U.S. military uses only about 3% of domestic steel output, and much of our imported steel comes from allies like Canada. So the “threat” really isn’t much of one.

Of greater concern is what the higher prices for steel and aluminum — remember, a tariff is actually a tax — will do to our domestic economy.

As the R Street Institute think tank reminds us, “According to 2015 U.S. Census data, steel mills employ about 140,000 Americans, while steel-consuming industries, including automakers and other manufacturers who rely on imported steel, employ more than 5 million. It is estimated that nearly 200,000 jobs and $4 billion in wages were lost during the 18 months during 2002 and 2003 that President George W. Bush imposed tariffs on imported steel …” . . .

In short, trade protection, especially tariffs, is a very bad deal for consumers and workers. But it’s very profitable for politically connected corporations. That’s why the financial markets melted down on Thursday. Will this event mark the end of the Trump bull market? It’s too soon to tell, but it bears watching. While most stocks fell on Thursday, steel and aluminum shares had a great day. Good for them, bad for the rest of us.

Maybe so, but what’s truly tragic is that Trump’s penchant for trade protection will in part offset the benefits to the economy from other free-market policies he has put in place, including tax cuts, deregulation, withdrawal from the Paris Accords on climate change and badly needed changes to ObamaCare.

We understand why he walked away from the Trans-Pacific Partnership trade deal and reopened NAFTA. He thought they were flawed, and they were.

But protectionism is a bad road to travel. Let’s hope this move by President Trump is merely a negotiating ploy, and not a long-term policy. If it’s the latter, buckle up — we’re in for a bumpy ride.

CNN has called Trump ignorant on trade, but the only one more protectionist than Donald Trump is the Democrats, who were all applauding Trump’s decision to impose tariffs.  In truth Trump’s ignorance reflects the ignorance of many Americans, who simply believe that the US does not export much and all imports are unfairly traded because they are all dumped.

For years, however, the Commerce Department has created dumping rates by using a policy called zeroing, which allowed Commerce to create dumping rates when there simply were none.  Also with regards to China, Commerce creates dumping rates because it refuses to use actual prices or costs in China, instead using surrogate values from import statistics in 5 to 10 different countries to construct a cost.

Commerce, in effect, is a hanging judge.  That would not matter but when that faulty premise is used to justify a trade war than the US truly does have problems.

Americans also are ignorant because they simply do not understand that in 2017 the US exported $2.4 trillion in goods and services, $1.6 trillion in goods.  See the Commerce Department report below in my post on US exports.

That reality means that foreign countries have many, many retaliation targets against US exports.  This trade war will not be pretty and many Americans and American companies will be hurt.  No one wins a trade war.  Trade wars are a lose lose situation.

US CHINA TRADE WAR FEBRUARY 24, 2018

Dear Friends,

In my last blog post, I asked whether President Trump’s economic juggernaut could be stopped by a trade war.  At the start of the Trump Administration, economic growth was a meager about 2% and there was a true unemployment crisis.  But one way to cure the economy and the trade problem is by making US companies more competitive and that is just what Trump and the Republicans have done with their tax bill and cutting regulations.  Economic growth is approaching 3% or higher.  Unemployment, including Black and Hispanic unemployment, is the lowest in decades.

In January, however President Trump had not yet started a trade war yet.  What a difference one month can make. In January President Trump imposed large tariffs on imports of solar cells and washing machines, wants to impose tariffs on imports of steel and aluminum pursuant to Commerce’s recommendations in section 232 National Security cases and wants to hammer China with more tariffs for intellectual property violations.  It appears that President Trump wants to solve all his disputes with foreign countries by raising tariffs.

But as indicated below, Trump’s desire for more tariffs simply reflects the feeling of many Americans that tariffs should go up to protect various US industries because Trump and many Americans simply do not understand how much the US exports.  The average American has been led to believe that imports are bad, exports are good and US exports very little.  That is the reason for the trade deficits and, therefore, all imports must be unfairly traded.  Trump’s and the average American’s belief is very dangerous thinking because it ignores the reality that the US in 2017 exported over $2 trillion in goods and services.  People in glass houses should not throw tariff stones and the United States has a very big glass house.  Belittling US exports is truly playing with trade war fire.

Trump and many average Americans do not understand what goes around comes around.  Trump, in fact, is inviting trade retaliation and igniting a trade firestorm.  In response to the self-initiation of the Aluminum Sheet case, the Chinese government has upped the game and responded with its own trade case against $1.25 billion of US agricultural exports of Sorghum Grain to China.  There are strong indications that the Chinese government is looking at antidumping and countervailing duty cases against $13.9 billion in US exports of soybeans to China, which will equal to 10% of US agricultural exports in total.

Pursuant to WTO trade rules, the EC, Japan, Korea and China are all asking for trade compensation for the Solar and Washing Machine tariffs imposed on their imports, and these same countries are sure to retaliate if Trump issues high tariffs on imports of steel and aluminum from these same countries.

Meanwhile, the Wall Street Journal is reporting that the US agricultural industry is hurting and one of the reasons is trade disputes and now trade retaliation.  President Trump and many Americans should be careful what they wish for, because they may get it.

But there are rays of sunlight in the US economy, President Trump and Vice President Pence have made noises about possibly rejoining the Trans Pacific Partnership (“TPP”).  More importantly, the Trump tax cuts and cut in regulations has made US producers much more competitive and created a manufacturing renaissance.  A trade war, however, could kill the economic golden goose.

Exclusions are a big issue in the Section 201 Solar case and in a stunner the ITC voted against Boeing in the Bombardier Civil Aircraft case.  More trade cases are being filed against imports.

But there is a remedy to trade problems that is not protectionist and does not invite retaliation.  That is making US companies more competitive.  As stated below, Trade Adjustment Assistance for Companies, a program personally approved by President Reagan, works and is able to save companies injured by imports.  Since 1984, the Northwest Trade Adjustment Assistance Center, which I am involved in, has been able to save 80% of the companies that got into the program.  If you save the companies, you save the jobs that go with those companies.

If anyone has any questions or wants additional information, please feel free to contact me at my e-mail address bill@harrisbricken.com.

Best regards,

Bill Perry

PRESIDENT TRUMP’S ADMINISTRATION APPEARS TO BE PREPARING FOR A TRADE WAR AND THE CHINESE GOVERNMENT HAS ALREADY CREATED A RETALIATION LIST WITH AGRICULTURE BEING THE NUMBER ONE TARGET

As stated above, up to now, President Trump has not started a trade war, but that appears to be changing.  As stated below, on January 21st, President Trump announced large tariffs on imports of solar cells and washing machines and the target countries are already asking for trade compensation, tariffs on US exports.  Every day President Trump appears to use the tariff hammer to deal with different foreign policy disputes and it looks like tariffs on imported steel and aluminum products are coming.

On February 4th, in a meeting with State Department, Defense Department, and Homeland Security officials, Trump promised to use tariffs to deal with immigration problems and put tariffs on the goods of countries and sanction others that refuse to take their citizens/nationals back upon deportation.  Trump stated:

“But if they don’t take them back, we’ll put sanctions on the countries. We’ll put tariffs on the countries. They’ll take them back so fast your head will spin. We’ll just tariff their goods coming in, and they’ll take them back in two seconds. You have a lot of people from those countries, and they’ll take them back.”

This is just one example where President Trump indicates his strong belief that Tariffs on imports are the weapon to use to pressure countries to fall into line with US policy interests.

Moreover, President Trump has promised his base during the election to be very tough on trade.  But President Trump unfortunately does not realize there is a price to pay for a trade war—retaliation against US exports.

DESPITE THE REAGAN WARNING MANY AMERICANS APPARENTLY WANT INCREASED TARIFFS TO PROTECT US INDUSTRIES EVEN IF US EXPORTS GET SMASHED

But President Trump’s favorable view of tariffs on imports may simply reflect the beliefs of many Americans that trade is bad.  Exports are good, but all imports are bad.  Therefore, if there is a trade deficit, that must mean that trade and imports are hurting US industry because all imports are unfairly traded and the solution is simply put more trade barriers up.

Such a way of thinking is perpetuated by a Commerce Department that finds dumping in almost 100% of the cases, especially against China, because Commerce uses fake numbers, surrogate values from 5 to 10 different countries, to create dumping margins in Chinese cases.  Literally, over the past few decasdes, the number of cases in which the Commerce Department reached a no dumping and no countervailing duty case, turning the case off can be counted on less than two hands.  Commerce is a hanging judge, but when that hanging judge creates a myth that all imports into the US  are dumped and subsidized, that is when real probelms begin.  Although Paul Ryan, Speaker of the House, once stated that 70% of all customers are outside the United States, that point apparently has been forgotten and does not register with the average American, who thinks that putting up high tariffs will solve the trade problems and protect US manufacturing.

On January 26, 2018, Rasmussen Reports in an article entitled “Americans Still Favor Use of Protective Tariffs” stated that polls show that Americans favor tariffs:

“President Trump this week imposed heavy tariffs on foreign manufacturers of washing machines and solar panels to protect U.S. businesses. Americans by a two-to-one margin think tariffs are a good way to go.

The latest Rasmussen Reports national telephone and online survey finds that 50% of American Adults believe the federal government should place tariffs on goods from countries that pay very low wages to their workers. Twenty-six percent (26%) oppose tariffs on such goods even though the low wages mean these manufactured items often cost less than comparable American products. One-in-four (24%), however, are undecided.”

On February 6, 2018, Breitbart reported on the Rasmussen Poll in an article entitled “Americans Increasingly Support Tariffs to Protect US Against Globalization”, stating:

“Americans are increasingly supportive of tariffs on cheap, imported goods from foreign countries to protect American industries and workers against wild globalization.

In a poll by Rasmussen Reports, roughly 50 percent of Americans said the federal government should “place tariffs on goods from countries that pay very low wages to their workers,” as opposed to only 26 percent of Americans who said tariffs should not be imposed on foreign countries.

About 24 percent of Americans said they were “not sure” if the government should use tariffs to protect American industries.

Additionally, a plurality of Americans, about 44 percent, said the federal government is not doing “enough” to protect U.S. manufacturers and businesses from foreign competition” from globalization which has been exacerbated by endless multinational free trade agreements supported by the Democratic and Republican party establishments.

The support for protective tariffs has increased from two years ago, in 2015, when 47 percent of Americans polled by Rasmussen Reports said the federal government should place tariffs on foreign countries dumping cheap, imported products in the U.S.

In that 2015 poll, a plurality of Americans, about 40 percent, said free trade agreements like NAFTA and KORUS “take jobs away” from Americans.

The support for tariffs is positive news for President Trump’s administration, which is combatting globalization by imposing tariffs to protect American industries. In the Trump administration’s latest “America First” trade move, the White House placed a 30 percent tariff on imported solar products.

The tariff, as Breitbart News reported, has already resulted in a Chinese solar company announcing plans to build a solar plant in the U.S. rather than overseas.

The Trump administration’s pro-American trade initiatives are a break from over two decades of globalist trade agendas of past administrations under President George W. Bush and President Obama. For years, both political establishments have joined forces to push multinational free trade deals that outsource and offshore Americans’ jobs to foreign nations.

As Breitbart News reported in 2016, South Carolina is just one example of a state that was devastated by NAFTA, with the state losing about one-third of its manufacturing jobs since 1994 when the free trade agreement was signed.

In Trump’s most significant pushback against the Democratic and Republican apparatus on free trade and global initiatives, rather than individual nation-state efforts, he ended the Trans-Pacific Partnership (TPP) free trade agreement and the Paris Climate Agreement. . . .”

But President Ronald Reagan understood that the there is a price to pay for tariffs on imports—retaliation against US exports.  As President Reagan stated in a speech on June 28, 1986:

“That’s because international trade is one of those issues that politicians find an unending source of temptation. Like a 5-cent cigar or a chicken in every pot, demanding high tariffs or import restrictions is a familiar bit of flimflammery in American politics. But cliches and demagoguery aside, the truth is these trade restrictions badly hurt economic growth. . . .

We had an excellent example of this in our own history during the Great Depression. Most of you are too young to remember this, but not long after the stock market crash of 1929, the Congress passed something called the Smoot-Hawley tariff. Many economists believe it was one of the worst blows ever to our economy. By crippling free and fair trade with other nations, it internationalized the Depression. It also helped shut off America’s export market, eliminating many jobs here at home and driving the Depression even deeper. . . .

But I think you all know the inherent danger here. A foreign government raises an unfair barrier; the United States Government is forced to respond. Then the foreign government retaliates; then we respond, and so on. The pattern is exactly the one you see in those pie fights in the old Hollywood comedies: Everything and everybody just gets messier and messier. The difference here is that it’s not funny. It’s tragic. Protectionism becomes destructionism; it costs jobs.”

Like Breitbart, many Americans believe that the US simply does not export much.  The cost of President Trump’s protective tariffs, however, will be very high when US exports in 2017 were over $2 trillion.  On January 21st, President Trump imposed high tariffs on imports of solar cells and washing machines.  On January 24th, the Wall Street Journal in an editorial entitled “Trump Starts His Trade War”, stated:

“Can Donald Trump stand prosperity? Fresh from a government shutdown victory and with the U.S. economy on a roll, the President decided on Tuesday to kick off his long-promised war on imports—and American consumers. This isn’t likely to go the way Mr. Trump imagines.

“Our action today helps to create jobs in America for Americans,” Mr. Trump declared as he imposed tariffs on solar cells and washing machines. “You’re going to have a lot of plants built in the United States that were thinking of coming, but they would never have come unless we did this.”

The scary part is he really seems to believe this. And toward that end he imposed a new 30% tariff on crystalline silicon photovoltaic cells and solar modules to benefit two bankrupt companies, and a new 20%-50% tariff on washing machines to benefit Whirlpool Corp. The tariffs will hurt many more companies and people, and that’s before other countries retaliate.

The solar tariff is a response to a petition filed at the International Trade Commission by two U.S.-based manufacturers—Chinese-owned Suniva, which filed for bankruptcy last year, and German-owned SolarWorld Americas, whose parent company filed for bankruptcy last year. Under Section 201 of U.S. trade law, the companies don’t need to show evidence of dumping or foreign subsidies. They merely have to show they were hurt by imports, which is to say by competition.

The two companies once employed some 3,200 Americans. But the wider solar industry, which depends on price-competitive cells as a basic component, supports some 260,000 U.S. jobs.

Costs will rise immediately for this value-added part of the industry, which the Solar Energy Industries Association (SEIA) says includes the manufacture of “metal racking, high tech inverters, machines that improve solar output by tracking the sun and other electrical products.”

The Journal reported Tuesday that the Trump tariff may spur an unnamed panel manufacturer to invest in a new plant in Florida that will create 800 new jobs. But SEIA says it expects that the tariff will cost 23,000 U.S. jobs this year alone. It will also mean that billions of dollars of solar investments are likely to be postponed or canceled. Utility companies facing green-energy mandates from state governments will also suffer as it gets more costly to deliver solar- produced electricity.

Mr. Trump will also make doing the laundry great again, or at least more expensive, with a new 20% tariff on the first 1.2 million imported washing machines every year. Above that the tariff will go to 50%. Don’t even think about assembling a washer with foreign parts, which get whacked with a 50% tariff above 50,000 imported units in the first year. . . .

Manufacturers will also lose flexibility in sourcing parts, which is critical to competitiveness. In South Carolina, where Samsung has a new $380 million appliance plant, the Trump tariffs aren’t welcome. Republican Gov. Henry McMaster is worried they’ll hurt the investment climate and invite retaliation.

Mr. Trump conducts trade policy as if U.S. trading partners have no recourse. With exports of $30.9 billion in 2016 and among the country’s highest level of exports per capita, South Carolina knows better. By justifying tariffs solely on the failure to compete, Mr. Trump is inviting other countries to do the same for their struggling companies. Their case at the World Trade Organization will also be a layup, allowing legal retaliation against U.S. exports.

By the way, if Mr. Trump thinks these new border taxes will hurt China, he’s mistaken again. China ran a distant fourth as a producer of solar cell and modules for the U.S. in 2017, after Malaysia, South Korea and Vietnam. Korea and Mexico are the two largest exporters of washing machines to the U.S. Mr. Trump’s tariffs are an economic blunderbuss that will hit America’s friends abroad and Mr. Trump’s forgotten men and women at home.”

TRUMP AND MANY AMERICANS SIMPLY DO NOT REALIZE HOW MUCH THE US EXPORTS AND PEOPLE IN GLASS HOUSES – –

President Trump and many Americans simply do not understand that despite the trade deficit, in 2017 total US exports of goods and services was $2.4 trillion.  $1.622 trillion was US exports of goods, such as machinery, semiconductor chips and other items.  China and other countries have many ripe targets for retaliation against the US.

On February 16, 2018, in the attached report, 2017 TRADE DATA, the U.S. Census Bureau U.S. Bureau of Economic Analysis of the Commerce Department reported that for full year 2017:

Exports were $2,329.3 billion in 2017, up $121.2 billion from 2016. Imports were $2,895.3 billion in 2017, up $182.5 billion from 2016.

In other words, US exports in 2017 of goods and services were $2.3 trillion and imports were $2.8 trillion creating a trade deficit of $566.0 billion.  With regards to US exports, of the $2.3 trillion, export of services was $777.9 billion.  Services include exports of financial services, express delivery, media and entertainment, distribution, telecommunications and computer service.  Exports of goods was over $1.5 trillion, including industrial supplies and materials, crude oil, capital goods, including industrial machines and aircraft engines.

Although exports of agricultural products are important at about $132 billion, exports of industrial supplies and materials at $462 billion and exports of capital goods except automotive at $532 billion are much more important.  Exports of Automotive vehicles and parts at $157 billion, consumer goods at $197 billion and export of other goods at $62 billion are also very important.

The focus of this piece is on exports because much to the surprise of many in the Trump Administration and possibly Trump himself and the average American, these US Commerce statistics establish that the US exports a lot of goods to various countries around the World and this creates tempting targets for retaliation and it is not just agriculture.  People in glass houses should not throw stones and putting up tariff barriers to imports invites a trade retaliation firestorm.

When I mentioned US exports, one self-proclaimed conservative responded, “You mean apples.”  Uh, no exports of industrial goods are much larger than exports of agricultural products.

If Trump creates a trade war, the United States has a lot to lose.

STATE OF THE UNION—TRADE RECIPROCITY OR MANAGED TRADE??

In his January 30, 2018 State of the Union address, President Trump did not mention trade much but stressed in his speech on his economic policies have helped bring back manufacturing to the US and increased US jobs, stating:

“3 million workers have already gotten tax cut bonuses — many of them thousands and thousands of dollars per worker. And it’s getting more every month, every week. Apple has just announced it plans to invest a total of $350 billion in America, and hire another 20,000 workers. And just a little while ago, ExxonMobil announced a $50 billion investment in the United States, just a little while ago. . . .

Very soon, auto plants and other plants will be opening up all over our country. This is all news Americans are totally unaccustomed to hearing. For many years, companies and jobs were only leaving us. But now they are roaring back. They’re coming back. They want to be where the action is. They want to be in the United States of America. That’s where they want to be. . . .”

But President Trump then went on to state about trade:

“America has also finally turned the page on decades of unfair trade deals that sacrificed our prosperity and shipped away our companies, our jobs, and our wealth. Our nation has lost its wealth, but we’re getting it back so fast. The era of economic surrender is totally over. From now on, we expect trading relationships to be fair and, very importantly, reciprocal.

We will work to fix bad trade deals and negotiate new ones. And they’ll be good ones, but they’ll be fair. And we will protect American workers and American intellectual property through strong enforcement of our trade rules.”

In response to the State of the Union address, on January 31st, John Brinkley in an article in Forbes entitled “With No Accomplishments To Report, Trump All  But Skips Trade In SOTU” stated:

“Last week, at the World Economic Forum meeting in Davos, Switzerland, President Trump suggested he was open to rejoining the Trans-Pacific Partnership. That was surprising, given that one of the first things he did as president was withdraw the United States from it.

Last night, in his State of the Union address, he devoted all of 78 words to trade policy, including nothing he hadn’t said before, nothing about the TPP, nothing about NAFTA (which he recently called a “bad joke”) and nothing direct about the U.S. trade deficit.

“From now on,” he said, “we expect trading relationships to be fair and, very importantly, reciprocal.”

The Merriam-Webster Dictionary defines “reciprocal” as “mutually corresponding.” If Trump wants every dollar of imports to be matched by a dollar of exports, that is an impossible goal. Tinkering around with NAFTA and the Korea-U.S. Free Trade Agreement, as his administration is doing, will have no appreciable effect on the U.S. trade deficits with Mexico and South Korea.

By now, he’s heard enough from the U.S. Chamber of Commerce, his friends in the business world, even his own secretary of agriculture, about how important trade is to them. None of them asked him to renegotiate NAFTA or the Korea agreement.

None of them asked him to withdraw from the TPP. You’ll recall that it was delegates to the 2016 Democratic Convention who held up “No TPP” signs and that Hillary Clinton and Bernie Sanders ran away from the agreement as though it were a rattlesnake.

Trump and Sanders were dead wrong about the TPP and about trade in general, but at least they believed what they said. Clinton, on the other hand, was dead wrong, and she knew it.

“We will work to fix bad trade deals and negotiate new ones,” Trump said last night. Does he still believe this strategy is going to lead to reciprocal trade? Or is he just saying what his base wants to hear? . . . .

Bottom line: Trump’s State of the Union claims that “America has also finally turned the page on decades of unfair trade deals” notwithstanding, he has yet to make good on any of his trade-related threats and promises. We still have all the trade deals we had a year ago, and the U.S. trade deficit has increased.”

On February 12th in an article entitled “Trump Says US Will impose A Reciprocal Tax on Imports”, Breitbart reported:

“President Donald Trump said on Monday that the U.S. government will impose a “reciprocal tax” on imports from countries that levy tariffs against American made goods.

“We’re going to charge countries outside of our country–countries that take advantage of the United States, some of them are so-called allies but they’re not allies on trade,” Trump said during a White House meeting on infrastructure. “We’re going to be doing very much a reciprocal tax and you’ll be hearing about that during the week and coming months.”

Commerce Secretary Wilbur Ross applauded the idea, saying that the U.S. needs to “claw back” the revenue other countries raise by taxing U.S. products.

The U.S. has very low tariffs compared with some of our biggest trading partners. The trade-weighted average of U.S. tariffs is just 2.4 percent. China’s is 4.4 percent.”

While Congress has the authority to set taxes and tariffs, the law authorizes the president to unilaterally impose tariffs in certain circumstances. In January, for example, the administration announced that it would impose tariffs on washing machines and solar products. The administration could potentially expand its use of these types of sanctions instead of waiting on Congress to pass new tariffs.”

Under the Constitution, however, the Congress controls trade, not the President and any new reciprocal tariff would probably have to go through Congress, which would not agree to such a new law.  On January 30th, Politico reported in an article entitled “Republicans seek to Tame Trump on Trade”:

“The GOP has long been a party of free traders. During the past two years of President Barack Obama’s presidency, Senate Republicans labored to pass a bill giving him the ability to quickly negotiate new trade deals. Now they have a president of their own party who prefers to scrap trade deals and slap tariffs on other nations.

Senate Finance Chairman Orrin Hatch (R-Utah), who led the fight to give Obama so-called Trade Promotion Authority, said he wants to hear Trump “extrapolate” concrete policies, because “right now they’re just suggestions.”

“I’m not uncomfortable. But I’m not comfortable either,” Hatch said of Trump’s trade stance. “I’m a free-trade guy. And I believe that this ought to be a free-trade country, especially when it comes to NAFTA and our hemisphere.”

Republican sources said GOP senators’ disagreements with Trump on trade surface far more often in party lunches than what the president said on Twitter or the chaotic story of the day from within the White House. Senators will often wait to complain about Trump’s policies until Tuesdays, when Vice President Mike Pence often visits the GOP lunch, hoping that bending Pence’s ear will help moderate Trump.

And in some cases, Trump has listened. His decision to impose tariffs on solar panels wasn’t as severe as some senators had feared. And Trump opened the door last week to re-engaging on the Trans-Pacific Partnership, a massive deal negotiated by Obama with Pacific Rim countries that Trump rejected shortly after taking office. The Trump administration has also sought to soothe some senators over NAFTA in recent weeks, according to GOP senators.”

But if by reciprocity, Trump means busting up barriers to US exports, that is fine with me and fine with President Reagan.  President Reagan and many successive Presidents have taken aggressive enforcement actions to break down barriers to US exports and investment.  If China has high tariffs on certain exports or bars US exports or investment in certain sectors, why should the US open up its border to Chinese imports and investment in those sectors?

But the major problem with such a new reciprocal tariff is the WTO Agreement and the bedrock agreement of Most Favored Nation.  The MFN principle provides that once a country becomes part of the WTO, with its general tariffs, it must treat all imports equally and cannot discriminate against imports from different countries, except with a Section 201 Escape Clause case or if dumping, subsidization or other unfair trade practices are involved.  Thus, a reciprocal tariff will invite retaliation by foreign countries pursuant to the WTO Agreement.  That is why many knowledgeable persons in the trade field have pushed for free trade agreements that lower tariffs, where the US has much to gain.

But because of his focus on trade deficits, if Trump means managed trade, not free trade, to reduce trade deficits, which means putting up high tariff walls to imports to equalize competition, count me and many other countries out, which will have no inclination to negotiate a bilateral trade deal with the US.

THE US BUILT THE WTO FREE TRADE MODEL THAT TRUMP APPARENTLY WANTS TO TEAR DOWN

On February 6, 2018, in an article entitled “US Leadership in International Trade: Recalibration or Retreat?” in The Diplomat, Mercy Kuo interviewed Ambassador Rufus Yerxa, president of the National Foreign Trade Council (NFTC) and deputy director general of the WTO from 2002 to 2013.  On a personal note, I used to work with Ambassador Yerxa many years ago at the International Trade Commission.  During this interview, Ambassador Yerxa made two very important points about the Trump trade policy:

“Is the U.S. retreating from or recalibrating its leadership role in international trade?

There is clearly a significant danger for the United States and for world trade generally if the Trump administration applies its concept of economic nationalism in the wrong way – by building trade barriers in sectors where we are uncompetitive, withdrawing from our trade alliances, or starting trade wars with excessive use of unilateral tariffs or other forms of trade retaliation. The dangers are three-fold: first, we will be turning inward and losing our competitiveness; second, by shelving our existing preferential free-trade arrangements just when our competitors are expanding theirs, we will lose our competitive position in export markets; and third, by abandoning WTO principles and acting unilaterally, we will make it more likely that other countries will write global trade standards without us and further isolate us from the global economy.

So far, the Trump administration’s rhetoric on this idea of economic nationalism has far exceeded its actions. But the administration’s worrying belief in mercantilist trade polices as a panacea for all our economic ills runs the risk of moving our country decisively in the direction outlined above. In the end, such a philosophy may cause our economy and our workers far more harm than good. American industries are willing to support a tougher line on enforcement of trade rules, as well as a more resolute stand against the nationalistic, unfair trade, and investment policies of China. But these things need to be done in the context of our broader support for the open trading system we led the world in building. If we send the signal that we do not believe in that system – even though it is there because of our leadership – we will lose the support we have built over 70 years for free and fair trade, and with it we will lose our leverage to shape the future of globalization.

What might the World Trade Organization (WTO) look like without U.S. involvement?

It is not a very pretty thought. The WTO system was designed to reflect core U.S. values, such as non- discrimination, transparency, and respect for the rule of law. These values are embedded in the organization’s rules, and help to commit other countries to the basic ideals of free market economics that America was built upon. For example, the WTO has some fairly effective rules about subsidy practices, dumping, and non-tariff measures (such as technical barriers to trade). These are important safeguards for U.S. industries.

For the U.S. to disengage from the WTO system, particularly at this critical moment in the globalization process, would leave the door open for politically influential countries such as China and Russia to push a trade model based much more on state-run capitalism and authoritarian economics than on our free market principles. This could pose a long-term problem that could take decades to repair. In fact, it took decades for us to push the Europeans in the right direction on state intervention, and the WTO’s predecessor, the GATT, was an important tool in that effort. Now the Europeans have a respectable state aids code and have adopted far greater discipline on agriculture subsidies. But if China, Russia, and others with less attachment to free market economics become the dominant force in the WTO, the Europeans themselves could be drawn back towards their earlier model, just as a matter of survival! That would not be a good world for Americans.”

AGRICULTURE HAVING A HARD YEAR BECAUSE OF TRUMP’S TRADE POLICY

The argument that consumers will be hurt by rising import prices simply carries no weight either with the Trump Administration or the US Congress.  If prices go up a few dollars at Wal Mart, no one in Washington DC other than the economic intellectuals care.  What does carry weight, however, is the strong argument that trade protectionism seriously damages US companies, including agriculture, and the strong and justified fear that many US companies, including US agriculture and manufacturing companies, will be badly hurt by trade retaliation.  President Trump’s decision to tear up the Trans Pacific Partnership, without trying to renegotiate it, may have appealed to those people in his base that are not knowledgeable about trade, but this decision to tear up the TPP and the failure to create more US free trade agreements puts many US agriculture companies at risk.

As stated before in past blog posts, no one in the Trump Administration or the Congress assessed the real costs to US industry of not doing the Trans Pacific Partnership.  Every day those costs are becoming clearer and clearer.

On February 15, 2018, Capital Press in an article entitled “Wheat industry seeks to re-enter TPP” describes in detail what the withdrawal from the TPP means for the US wheat industry and what that means for US jobs:

“If the United States doesn’t re-enter the Trans-Pacific Partnership, Northwest wheat exports to Japan could drop by half within a few years, says the leader of the Washington Grain Commission.

The Pacific Northwest currently exports roughly 800,000 metric tons of Western white wheat, a popular blend of soft white wheat and subclass club wheat, to Japan each year, commission CEO Glen Squires said.

Hard red winter and hard red spring wheat exports would also be impacted, affecting Montana and North Dakota, and other states exporting off the West Coast, Squires said.

Japan wants the U.S. in TPP, and is not interested in bilateral agreements, Squires said.

Wheat industry representatives met in Washington D.C. last week. Many legislators are aware of the concerns about the Trans-Pacific Partnership proceeding without the United States, Squires said. It will essentially amount to a tariff on U.S. wheat, putting the country at a price disadvantage in key markets compared to competing wheat-producing countries that are remain in the trade pact.

Changes under TPP will occur over nine years, but Squires said the impact on shipments could be much faster.

“This is a massively big deal,” he said.

Reduced demand would result in lower wheat prices, Squires said.

A national coalition of agricultural commodities is forming to address the situation, Squires said. The industry will appeal to the Trump administration to rejoin the trade deal.

“President Trump is the guy who can negotiate, and get us back involved,” Squires said. “It’s clearly a big impact: It’s the equivalent of handing our competitors a $500 million check per year.” . . .

Squires warned of “ripple effects” throughout the industry, which could happen as soon as U.S. wheat becomes uncompetitive in overseas markets. . . .

Without exports to Japan, the grain commission estimates volume would drop by 62.5 million bushels. That equals 19,000 fewer rail cars and nearly 70 bulk vessels each year. Impact would be felt by port facilities, barges, elevator longshoremen, ship handlers, and other industry members, Squires said.

Every $1 billion in farm exports supports more than 8,000 jobs in 2016. Wheat export losses of $500 million per year would lead to reductions in the work force across the supply chain, Squires said. . . .”

Emphasis added.

Keep in mind that rural America and farmers are a key constituency of the Trump Presidency. Trump won the Presidency not only because of Michigan, Ohio, Pennsylvania and Wisconsin, but also the states of Iowa, Kansas, Nebraska, Wyoming, Montana, North Dakota, South Dakota, Idaho, Utah, Arizona, and many other states where farmers and agriculture are very important for the economy of those States.

Yet the Wall Street Journal reported on February 8, 2018 that in contrast to the rest of the economy, Farm Incomes are falling:

“Farm Belt Braces for Falling Incomes, Trade Disputes

Farm incomes are forecast to decline 7% to $60 billion in 2018.

U.S. farmers are gearing up for another tough year.

Farm incomes are expected to hit their lowest point since 2006 and borrowing costs are rising, federal data shows, as a deepening slump in the agricultural economy enters its fifth year.

A string of bumper corn and soybean harvests has added to a glut of grain world-wide, eroding prices for U.S. farmers. Foreign rivals like Russia and Brazil are also chipping away at U.S. dominance in the global grain trade, helping to fuel a multiyear downturn that is pushing some farmers out of business.

“The state of the rural economy is fragile,” Agriculture Secretary Sonny Perdue told lawmakers during a hearing of the House Agriculture Committee on Tuesday. “There’s a lot of stress and a lot of duress on the farms today.”

The U.S. Department of Agriculture on Wednesday forecast that farm incomes would fall 7% to $60 billion in 2018 on lower crop and livestock revenue, less than half of the record $124 billion farmers earned in 2013. Farmers are already borrowing more to keep farms running. . . .

As spring planting looms, farmers are looking to South America for clues on demand for their own crop. The USDA boosted its forecast for Brazil’s soybean harvest on Thursday, and cut its projection for U.S. exports of the oilseed this season thanks to stiffer competition from South America.”

As stated many times in past blog posts, President Trump’s decision to rip up the Trans Pacific Partnership and talk about more tariffs on various trade areas has led to many foreign countries, including China, to not look at the US as a reliable partner in the trade area.  It has also resulted in many foreign countries, including Mexico, China, Japan and the EC, to switch sourcing products from the US and turn to alternative sources of supply.  Since almost 50% of all agriculture products are exported, one third of Iowa corn is exported to Mexico, agriculture and the farm states are starting to feel real pain because of the Trump trade policy.

TRANS PACIFIC PARTNERSHIP (“TPP”) RISES AGAIN???

As mentioned in my last blog post, Trump’s trade team is starting to realize that countries do not want to negotiate bilateral trade deals with the US.  Even though NAFTA may ultimately be renegotiated, the real problem is that with Trump’s policy of weaponizing trade agreements, no other country will enter into a trade agreement with the US.  As Robert Zoellick, the former United States Trade Representative (“USTR”) under President George W. Bush, stated on January 7th in the Wall Street Journal in an article entitled “Trump Courts Economic Mayhem”:

“No country wants to do a bilateral deal with Mr. Trump now because he demands managed trade, not fair competition. He wants excuses to raise barriers, not rules to boost trade.”

As stated above, that is a huge problem for US farmers because almost 50% of farm products produced in the US are exported.

Because of this failure, if Trump keeps going down this road, the US may conclude no free trade agreements.  This would have a devastating impact on US exporters, including US agricultural companies.  The entire World is moving to free trade agreements and because of Most Favored Nation principle, the US with lower tariffs than many other countries would benefit the most.   Because of this reality, in my last blog post I suggested that Trump might want to renegotiate the TPP, but only under strict conditions.

Lo and behold, in January and February there were noises from the President and the Administration about coming back to the TPP.

On January 23rd, in an article entitled, “TPP Members Reach Agreement on Major Trade Pact”, the Wall Street Journal reported:

“TOKYO—Negotiators from 11 Pacific Rim nations agreed Tuesday on a Trans-Pacific Partnership trade deal, the Japanese minister in charge of TPP said, a year after President Donald Trump withdrew the U.S. from the talks.

Negotiators gathered again in Tokyo Tuesday and cleared away the remaining sticking points, said Toshimitsu Motegi, the Japanese minister handling the talks. He said the 11 nations aim to sign the agreement on March 8 in Chile. . . .

The TPP deal came just a half-day after the Trump administration slapped steep tariffs on imported solar panels and washing machines, a move to implement Mr. Trump’s harder line on trade that he has touted since his election campaign.

Japan has depicted itself as a free-trade champion that can assume the kind of leadership role previously taken by U.S. administrations.

“Now in some parts of the world, there is a move toward protectionism, and I think the TPP-11 is a major engine to overcome such a phenomenon,” Mr. Motegi said.

He said the deal was “epoch-making for Japan as well as for the future of the Asia-Pacific region.” He also reiterated a hope frequently expressed by Japanese officials that once the 11- nation TPP is up and running, the U.S. might consider rejoining the deal.

The TPP agreement could also provide a framework for a future Nafta deal should the current one be scrapped by the Trump administration, according to people familiar with the trade talks. Senior Mexican officials see the TPP agreement as an indication that the free-trade train is rolling forward with regional pacts, with or without the U.S. aboard, as Nafta is being renegotiated.”

On January 26, 2018, during a meeting at the World Economic Forum in Davos, Switzerland, Trump discussed trade and eventually turned to the TPP stating:

“The United States is prepared to negotiate mutually beneficial, bilateral trade agreements with all countries. This will include the countries in TPP, which are very important. We have agreements with several of them already. We would consider negotiating with the rest, either individually, or perhaps as a group, if it is in the interests of all.”

In response to a question in an interview with CNBC’s Joe Kerne, Trump further stated:

“I would do TPP if we were able to make a substantially better deal.  The deal was terrible, the way it was structured was terrible. If we did a substantially better deal, I would be open to TPP.”

During his Davos address, however, Trump did not mention the TPP and instead put forth a very tough statement on trade:

“The United States will no longer turn a blind eye to unfair economic practices, including massive intellectual property theft, industrial subsidies, and pervasive state-led economic planning.  These and other predatory behaviors are distorting the global markets and harming businesses and workers, not just in the U.S., but around the globe.”

In line with the tough stance against international trade, during Davos Economic Forum, on January 24th, in an article entitled, “U.S. Commerce Secretary Slams Beijing for Protectionist Actions Under Free-Trade Rhetoric” the Wall Street Journal reported:

“The Chinese have for quite a little while been superb at free-trade rhetoric and even more superb at highly protectionist activities,” U.S. Commerce Secretary Wilbur Ross told a trade panel Wednesday in Davos, Switzerland. Mr. Ross went on to blame both Beijing and the European Union for unfairly benefiting from higher tariffs and challenged the other two big economies to lower their import duties to U.S. levels.

“We really are the least protectionist, and unfortunately we have the trade deficits to show for it,” Mr. Ross said.

The Trump administration is seeking to push its own trade message at the annual Davos economic gathering, which is closely linked to globalization and multilateralism. Mr. Ross backed the administration’s bilateral approach to negotiating trade agreements and defended President Donald Trump’s exit from the unratified 12-nation Trans-Pacific Partnership agreement a year earlier, saying there was “no political appetite” for the pact in either party.”

But then the TPP story continued to grow.  During his visit to Tokyo last year in 2017, Vice President Mike Pence stated as far as the Trump administration is concerned, the TPP is a “thing of the past.” But during his most recent trip to Tokyo in February 2018, his tune seemed to change.  On February 7th, Kyodo News reported that in discussions with Japanese Deputy Prime Minister Taro Aso, Vice President Pence “referred to the possibility of the United States returning to the Trans-Pacific Partnership free trade deal.”  Apparently, Pence’s statement was in response to a question from the Deputy Prime Minster about Trump’s statement at Davos.  Apparently, Pence and Aso then exchanged views on the strategic importance of the TPP.

On January 31st, the famous economist Robert Samuelson in an article in Investors Business Daily entitled “Trump Dumped TPP A Year Ago – -What Did it Accomplish” stated:

“As President Trump appraises the state of the union, it’s worth remembering what still ranks as one of the worst decisions of his presidency: the withdrawal of the United States from the Trans-Pacific Partnership, or TPP. It happened just about a year ago.

You’ll recall that the TPP was an agreement between the U.S. and 11 other countries — Australia, Japan, New Zealand, Canada, Mexico, Singapore, Malaysia, Vietnam, Brunei, Chile and Peru — representing about 40% of the world economy.

Rejecting the TPP was, for Trump, a highly symbolic act buttressing his assertions that the United States has made bad trade deals that have diverted jobs, incomes and influence to foreign countries. He pledged to do better.

The reality is just the opposite, as a short analysis by economist Jeffrey Schott of the Peterson Institute makes clear. It turns out that the other 11 countries weren’t willing to sacrifice the TPP’s benefits. They decided to adopt the agreement anyway — without the United States — calling it the Comprehensive and Progressive Agreement for Trans-Pacific Partnership, or (a mouthful) CPTPP. It’s scheduled to be signed on March 8 in Chile.

The new agreement makes the United States “the biggest loser” from the whole TPP episode, writes Schott. For starters, there will be lower exports and incomes. Economic simulations done by researchers at the Peterson Institute estimated that the TPP would ultimately raise U.S. gross domestic product by $131 billion, or 0.5% of GDP. Those gains are now gone.

Schott notes that a number of TPP provisions advocated by the United States but opposed “by most other countries” have been dropped in the new agreement. These include “obligations regarding patents on certain pharmaceutical products, procedures involving investor-state disputes, prohibitions on the illegal taking and trade in wildlife” and restrictions on government-owned firms.

The biggest winner in the TPP episode is, almost certainly, China. Although China wasn’t a member of the TPP, Trump’s decision to withdraw leaves other Pacific-rim countries less dependent on the United States for their trade and more dependent on China — and, therefore, more subject to Chinese economic and political influence.

Rarely has the United States embraced a policy that, in contrast to the supporting rhetoric, is so contrary to its own interests. Even Trump may recognize this. In his speech at the World Economic Forum in Davos, he hinted obliquely that he might resume negotiations with the other TPP nations “if it is in the interests of all.”

The open question now is whether the president will repeat his mistake by repudiating the North American Free Trade Agreement (NAFTA), the trade pact among the United States, Mexico and Canada that Trump has sharply criticized. The damage would be even greater.”

During the time when the TPP was being discussed in Congress, its passage was in trouble because many Senators and Congressmen believed the US did not get enough and many Senators and Congressmen wanted a a better deal.  But now there is no deal and the costs of not doing the TPP are becoming clearer.

On February 16th, 25 Republican Senators, many from agriculture states, such as Hatch, Grassley, Ernst, Enzi, Gardner, McCain and Daines, sent the attached letter to President Trump, 021618 Letter to POTUS on TPP1, strongly urging him to rejoin the Trans Pacific Partnership stating:

“Mr. President:

We write in support of your recent comments expressing interest in re-engaging with the Trans­ Pacific Partnership (TPP) to bring about a stronger agreement for the United States. Reducing barriers to trade and investment, protecting American intellectual property rights, and leveling the playing field for U.S. businesses, manufacturers, farmers, fishermen, and ranchers is of utmost importance, and we ask that you prioritize engagement with the TPP so that the American people can prosper from the tremendous opportunities that these trading partners bring.

As you know, increased economic engagement with the eleven nations currently in the TPP has the potential to substantially improve the competitiveness of U.S. businesses, support millions of U.S. jobs, increase U.S. exports, increase wages, fully unleash America’s energy potential, and benefit consumers. Increasing access to a region and market that has a population of nearly 500 million can create widespread benefits to the U.S. economy. An improved TPP would therefore bolster and sustain the economic growth America has experienced over the past year facilitated by the regulatory reductions and reforms enacted by your Administration and the substantial tax cuts that you signed into law.

Further, TPP can serve as a way to strengthen ties with our allies in the region, counter the influence of the People’s Republic of China (PRC), and increase pressure on the PRC to adopt substantive and positive economic reforms. Re-engaging on TPP would also provide another platform to modernize trade with Canada and Mexico. . . .

In summary, we encourage you to work aggressively to secure reforms that would allow the United States to join the agreement. We share your commitment for free trade agreements that benefit the American people, and we stand ready to work closely with you toward achieving a TPP agreement that meets this objective.”

As predicted many times in prior blog posts, the costs of not joining the TPP are becoming clearer and clearer and the real economic pain of not joining the TPP is also becoming starkly clear.

RETALIATION BEGINS– FIRST SORGHUM GRAIN NEXT SOYBEANS??

As stated above, when the US imposes trade restrictions, US trading partners will respond with their own trade restrictions retaliating against US exports.  But Trump and the average American may simply believe that neither the EC nor China will retaliate against US exports, causing economic pain to the US.  Think again as the retaliation has already started and it will hurt.

MOFCOM SELF-INITIATED ANTIDUMPING (“AD”) AND COUNTERVAILING DUTY (“CVD”) CASES AGAINST SORGHUM GRAIN FROM THE US

On December 1, 2017, in the first time in over a decade, the Commerce Department self-initiated an antidumping and countervailing duty case against imports of aluminum sheet from China.

On February 4, 2018, the Ministry of Commerce (“MOFCOM”) in China retaliated by self-initiating its own antidumping and countervailing duty case against imports of US sorghum grain.  Total China imports of US Sorghum Grain in 2016 were 5,869,000 tons worth more than $1.26 billion USD.

Notices of appearance are due at MOFCOM by February 24th.

Although the Trump Administration and many Americans may believe that the US government does not provide subsidies to its producers, as mentioned in the MOFCOM announcement, it will be investigating large US agricultural subsidies for sorghum grain, such as Crop Insurance Program, Price Loss Protection Program, Agricultural Risk Protection Program, Marketing Loan Program, Export Credit Guarantee Program, Market Access Program and Foreign Market Development Partner Program.

Some of the US companies that may be the targets of this MOFCOM action are: Agniel Commodities, LLC, Attebury Grain, LLC, Big River Resources, Bluegrass Farms of Ohio, Inc., Bunge North America, Inc., Cardinal Ethanol, LLC, Cargill, Inc., Consolidated Grain and Barge Co., DeLong Company  Inc., Enerfo USA, Inc., Fornazor International Inc., Freepoint Commodities LLC, Gavilon, Illinois Corn Processing, LLC, International Feed, Louis Dreyfus Commodities, Marquis Grain Inc., Mirasco Inc., Pacific Ethanol, Inc., Perdue AgriBusiness, LLC, The Scoular Company, Southwest Iowa Renewable Energy, LLC, Tharaldson Ethanol Plant I, LLC, United Wisconsin Grain Producers, and Zeeland Farm Services.

This case is important because it signals the possible start of a trade war with China.  The US self-initiates antidumping and countervailing duty cases against China; China self-initiates antidumping and countervailing duty cases against the US.

SOYBEANS?

On February 7th, Bloomberg reported that the Chinese government is looking at possibly self-initiating trade cases against Chinese imports of US soybeans.  In the article entitled, “China Studying Impact of Trade Measures Against U.S. Soy, Sources Say” Bloomberg stated:

“China is studying the potential impact of trade measures imposed on soybeans imported from the U.S., valued last year at $13.9 billion, according to people familiar with the matter.

Speculation is mounting over China’s response to U.S. tariffs on imported solar panels and washing machines announced last month. The Ministry of Commerce has been looking into the consequences of measures against U.S. soybeans since January . . . . That includes anti-dumping and anti-subsidy probes. . . .

China’s soybean imports have climbed to a record as expansion in large-scale livestock farming and a shortage of protein-rich feed grains boost soy-meal consumption. While the U.S. counts China as its biggest soybean market, the Asian country last year bought more of the oilseed from Brazil.”

If Section 232 Tariffs are imposed against US imports of EC Steel, the EC is planning to retaliate immediately against US exports of Harley Davidson Motorcycles from Wisconsin (Paul Ryan Republican Speaker of the House) and Jack Daniels Bourbon from Kentucky (Mitch McConnell, Republican Senate Majority).

SECTION 232 STEEL AND ALUMINUM CASES—THE REAL TRADE WAR BEGINS

President Trump must make a decision in the Section 232 National Security Cases against imports of steel and aluminum by April 11, 2018 in the Steel Case and April 19, 2018 in the Aluminum case. This article will concentrate on the Steel 232 case and mention Aluminum at the end because the Steel case is bigger, but both cases will have devastating consequences on downstream US producers and through retaliation on US exports.  Truthfully, if President Trump does what Commerce Secretary Ross is recommending and imposes very high tariffs on imports of steel and aluminum, he will ignite a trade war with many other countries, which will become red hot.  This will be a shooting trade war with retaliation aimed at US exports and this protectionism will become destructionism—killing US jobs.

Trump’s decisions in these two Section 232 cases will give us a much better idea of whether President Trump wants a trade war or not.  Both the EC, China and other countries are drawing up retaliation lists aimed at US exports of various products.

As background, on April 20, 2017, President Trump and the Commerce Department in the attached press announcement and fact sheet along with a Federal Register notice, Section 232 Investigation on the Effect of Imports of Steel on U.S Presidential Memorandum Prioritizes Commerce Steel Investigation _ Department of Commerce, announced the self-initiation of a Section 232 National Security case against imports of steel from every country.  See video of Trump signing the Executive Order with Secretary Ross and Steel Producers at https://www.youtube.com/watch?v=EiVfNOl-_Ho.

Commerce held a hearing on May 24th in this case.  The video of the hearing can be found at https://www.commerce.gov/file/public-hearing-section-232-investigation-steel-imports-national-security.

Under the terms of the executive order, the interagency group was to present a report to the White House within 270 days that identifies goods that are essential for national security and analyzes the ability of the defense industrial base to produce those goods.

Since the Secretary reported affirmatively, the President has 90 days to determine whether it concurs with the Secretary’s determination and “determine the nature and duration of the action that, in the judgment of the President, must be taken to adjust the imports of the article and its derivatives so that such imports will not threaten to impair the national security” – – April 11, 2018 in the Steel Case and April 19, 2018 in the Aluminum case.

Although Commerce Secretary Wilbur Ross pledged to get the Section 232 Steel and Aluminum reports to President Trump’s desk by the end of June 2017, that did not happen as the Administration began to realize the impact a broad tariff on steel or aluminum raw material inputs would have on downstream users, which are dependent on high quality, competitively priced raw materials to produce competitive downstream products made from steel and aluminum.

On February 16, 2018, Commerce Secretary Wilbur Ross released to the public the attached Section 232 National Security reports on Steel and Aluminum, Section 232 Reports _ Department of Commerce the_effect_of_imports_of_aluminum_on_the_national_security_-_with_redactions_-_20180117 the_effect_of_imports_of_steel_on_the_national_security_-_with_redactions_-_20180111.  These Reports recommend substantial Import restraints on imports of steel and aluminum.  In the attached statement accompanying the reports, Section 232 Reports _ Department of Commerce, Secretary Ross stated:

“I am glad that we were able to provide this analysis and these recommendations to the President.  I look forward to his decision on any potential course of action.”

In response to questions of whether the US would be vulnerable to challenges in the WTO, Ross said he would not be surprised if some countries filed World Trade Organization challenges, but he was confident that the United States was on firm legal ground.  Ross went on to state:

“National security is a very broadly encompassing topic … it is not just the narrow definition of defense needs, it also covers infrastructure needs and other needs.  So we believe and our counsel believes that this is a perfectly valid interpretation of national security the way that it’s used in Section 232, which is much broader than you might think in terms of usual parlance.”

STEEL REPORT AND RECOMMENDATIONS

The Commerce Department statement accompanying the Steel Report summarizes the findings and sets out the remedies recommended by the Department:

“The Department of Commerce found that the quantities and circumstances of steel and aluminum imports “threaten to impair the national security,” as defined by Section 232.

The reports are currently under consideration by the President, and no final decisions have been made with regard to their contents. The President may take a range of actions, or no action, based on the analysis and recommendations provided in the reports. Action could include making modifications to the courses of action proposed, such as adjusting percentages.

STEEL SUMMARY

The Commerce Department statement accompanying the Steel Report summarized the Key Findings of the Steel Report as follows:

The United States is the world’s largest importer of steel. Our imports are nearly four times our exports.

Six basic oxygen furnaces and four electric furnaces have closed since 2000 and employment has dropped by 35% since 1998.

World steelmaking capacity is 2.4 billion metric tons, up 127% from 2000, while steel demand grew at a slower rate.

The recent global excess capacity is 700 million tons, almost 7 times the annual total of U.S. steel consumption. China is by far the largest producer and exporter of steel, and the largest source of excess steel capacity. Their excess capacity alone exceeds the total U.S. steel-making capacity.

On an average month, China produces nearly as much steel as the U.S. does in a year. For certain types of steel, such as for electrical transformers, only one U.S. producer remains.

As of February 15, 2018, the U.S. had 169 antidumping and countervailing duty orders in place on steel, of which 29 are against China, and there are 25 ongoing investigations.

Recommendations of the Steel Report:

Secretary Ross has recommended to the President that he consider the following alternative remedies to address the problem of steel imports:

A global tariff of at least 24% on all steel imports from all countries, or

A tariff of at least 53% on all steel imports from 12 countries (Brazil, China, Costa Rica, Egypt, India, Malaysia, Republic of Korea, Russia, South Africa, Thailand, Turkey and Vietnam) with a quota by product on steel imports from all other countries equal to 100% of their 2017 exports to the United States, or

A quota on all steel products from all countries equal to 63% of each country’s 2017 exports to the United States.

Each of these remedies is intended to increase domestic steel production from its present 73% of capacity to approximately an 80% operating rate, the minimum rate needed for the long-term viability of the industry. Each remedy applies measures to all countries and all steel products to prevent circumvention.

The tariffs and quotas would be in addition to any duties already in place. The report recommends that a process be put in place to allow the Secretary to grant requests from U.S. companies to exclude specific products if the U.S. lacks sufficient domestic capacity or for national security considerations.

Any exclusions granted could result in changed tariffs or quotas for the remaining products to maintain the overall effect.”

ACTUAL SECTION 232 STEEL REPORT

In the actual Section 232 Steel report itself, the Department stated:

“CONCLUSION

The Secretary has determined that the displacement of domestic steel by excessive imports and the consequent adverse impact of those quantities of steel imports on the economic welfare of the domestic steel industry, along with the circumstance of global excess capacity in steel, are “weakening our internal economy” and therefore “threaten to impair” the national security as defined in Section 232.

The continued rising levels of imports of foreign steel threaten to impair the national security by placing the U.S. steel industry at substantial risk of displacing the basic oxygen furnace and other steelmaking capacity, and the related supply chain needed to produce steel for critical infrastructure and national defense.

In considering “the impact of foreign competition on the economic welfare of individual domestic [steel] industries” and other factors Congress expressly outlined in Section 232, the Secretary has determined that the continued decline and concentration in steel production capacity is “weakening of our internal economy and may impair national security.” See 19 U.S.C. § 1862(d).

Global excess steel capacity is a circumstance that contributes to the “weakening of our internal economy” that “threaten[s] to impair” the national security as defined in Section 232. Free markets globally are adversely affected by substantial chronic global excess steel production led by China. While U.S. steel production capacity has remained flat since 2001, other steel producing nations have increased their production capacity, with China alone able to produce as much steel as the rest of the world combined. This overhang of excess capacity means that U.S. steel producers, for the foreseeable future, will face increasing competition from imported steel as other countries export more steel to the United States to bolster their own economic objectives.

Since defense and critical infrastructure requirements alone are not sufficient to support a robust steel industry, U.S. steel producers must be financially viable and competitive in the commercial market to be available to produce the needed steel output in a timely and cost efficient manner. In fact, it is the ability to quickly shift production capacity used for commercial products to defense and critical infrastructure production that provides the United States a surge capability that is vital to national security, especially in an unexpected or extended conflict or national emergency. It is that capability which is now at serious risk; as imports continue to take business away from domestic producers, these producers are in danger of falling below minimum viable scale and are at risk of having to exit the market and substantially close down production capacity, often permanently.

Steel producers in the United States are facing widespread harm from mounting imports. Growing global steel capacity, flat or declining world demand, the openness of the U.S. steel market, and the price differential between U.S. market prices and global market prices (often caused by foreign government steel intervention) ensures that the U.S. will remain an attractive market for foreign steel absent quotas or tariffs. Excessive imports of steel, now consistently above 30 percent of domestic demand, have displaced domestic steel production, the related skilled workforce, and threaten the ability of this critical industry to maintain economic viability.

A U.S. steel industry that is not financially viable to invest in the latest technologies, facilities, and long-term research and development, nor retain skilled workers while attracting a next-generation workforce, will be unable to meet the current and projected needs of the U.S. military and critical infrastructure sectors. Moreover, the market environment for U.S. steel producers has deteriorated dramatically since the 2001 Report, when the Department concluded that imports of iron ore and semi-finished steel do not “fundamentally threaten” the ability of U.S. industry to meet national security needs.

The Department’s investigation indicates that the domestic steel industry has declined to a point where further closures and consolidation of basic oxygen furnace facilities represents a “weakening of our internal economy” as defined in Section 232.  The more than 50 percent reduction in the number of basic oxygen furnace facilities – either through closures or idling of facilities due to import competition – increases the chance of further closures that place the United States at serious risk of being unable to increase production to the levels needed in past national emergencies. The displacement of domestic product by excessive imports is having the serious effect of causing the domestic industry to operate at unsustainable levels, reducing employment, diminishing research and development, inhibiting capital expenditures, and causing a loss of vital skills and know-how. The present capacity operating rates for those remaining plants continue to be below those needed for financial sustainability. These conditions have been further exacerbated by the 22 percent surge in imports thus far in 2017 compared with 2016. Imports are now consistently above 30 percent of U.S. domestic demand.

It is evident that the U.S. steel industry is being substantially impacted by the current levels of imported steel. The displacement of domestic steel by imports has the serious effect of placing the United States at risk of being unable meet national security requirements. The Secretary has determined that the “displacement of domestic [steel] products by excessive imports” of steel is having the “serious effect” of causing the “weakening of our internal economy.” See 19 U.S.C. § 1862(d). Therefore, the Secretary recommends that the President take corrective action pursuant to the authority granted by Section 232. See 19 U.S.C. § 1862(c).

RECOMMENDATION

Prior significant actions to address steel imports (quotas and/or tariffs) were taken under various statutory authorities . . . all at lower levels of import penetration than the present level, which is above 30 percent.

Due to the threat of steel imports to the national security, as defined in Section 232, the Secretary recommends that the President take immediate action by adjusting the level of imports through quotas or tariffs on steel imported into the United States, as well as direct additional actions to keep the U.S. steel industry financially viable and able to meet U.S. national security needs. The quota or tariff imposed should be sufficient, after accounting for any exclusions, to enable the U.S. steel producers to be able to operate at about an 80 percent or better of the industry’s capacity utilization rate based on available capacity in 2017. . . .

By reducing import penetration rates to approximately 21 percent, U.S. industry would be able to operate at 80 percent of their capacity utilization. Achieving this level of capacity utilization based on the projected 2017 import levels will require reducing imports from 36 million metric tons to about 23 million metric tons. If a reduction in imports can be combined with an increase in domestic steel demand, as can be reasonably expected rising economic growth rates combined with the increased military spending and infrastructure proposals that the Trump Administration has planned, then U.S. steel mills can be expected to reach a capacity utilization level of 80 percent or greater. This increase in U.S. capacity utilization will enable U.S. steel mills to increase operations significantly in the short-term and improve the financial viability of the industry over the long-term.

Recommendation to Ensure Sustainable Capacity Utilization and Financial Health

Impose a Quota or Tariff on all steel products covered in this investigation imported into the United States to remove the threatened impairment to national security. The Secretary recommends adjusting the level of imports through a quota or tariff on steel imported into the United States.

Alternative 1 – Global Quota or Tariff

1A.      Global Quota

Impose quotas on all imported steel products at a specified percent of the 2017 import level, applied on a country and steel product basis.

According to the Global Trade Analysis Project (GTAP) Model, produced by Purdue University, a 63 percent quota would be expected to reduce steel imports by 37 percent (13.3 million metric tons) from 2017 levels. Based on imports from January to October, import levels for 2017 are projected to reach 36.0 million metric tons. The quotas, adjusted as necessary, would result in imports equaling about 22.7 million metric tons, which will enable an 80 percent capacity utilization rate at 2017 demand levels (including exports). Application of an annual quota will reduce the impact of the surge in steel imports that has occurred since the beginning of 2017.

1B.      Global Tariff

Apply a tariff rate on all imported steel products, in addition to any antidumping or countervailing duty collections applicable to any imported steel product.

Similar to what is anticipated under a quota, according to the Global Trade Analysis Project (GTAP) Model, produced by Purdue University, a 24 percent tariff on all steel imports would be expected to reduce imports by 37 percent (i.e., a reduction of 13.3 million metric tons from 2017 levels of 36.0 million metric tons). This tariff rate would thus result in imports equaling about 22.7 million metric tons, which will enable an 80 percent capacity utilization rate at 2017 demand levels (including exports).

Alternative 2 –Tariffs on a Subset of Countries

Apply a tariff rate on all imported steel products from Brazil, South Korea, Russia, Turkey, India, Vietnam, China, Thailand, South Africa, Egypt, Malaysia and Costa Rica, in addition to any antidumping or countervailing duty collections applicable to any steel products from those countries. All other countries would be limited to 100 percent of their 2017 import level.

According to the Global Trade Analysis Project (GTAP) Model, produced by Purdue University, a 53 percent tariff on all steel imports from this subset of countries would be expected to reduce imports by 13.3 million metric tons from 2017 import levels from the targeted countries. This action would enable an increase in domestic production to achieve an 80 percent capacity utilization rate at 2017 demand levels (including exports). The countries identified are projected to account for less than 4 percent of U.S. steel exports in 2017.

Exemptions

In selecting an alternative, the President could determine that specific countries should be exempted from the proposed 63 percent quota or 24 percent tariff by granting those specific countries 100 percent of their prior imports in 2017, based on an overriding economic or security interest of the United States. The Secretary recommends that any such determination should be made at the outset and a corresponding adjustment be made to the final quota or tariff imposed on the remaining countries. This would ensure that overall imports of steel to the United States remain at or below the level needed to enable the domestic steel industry to operate as a whole at an 80 percent or greater capacity utilization rate. The limitation to 100 percent of each exempted country’s 2017 imports is necessary to prevent exempted countries from producing additional steel for export to the United States or encouraging other countries to seek to trans-ship steel to the United States through the exempted countries.

It is possible to provide exemptions from either the quota or tariff and still meet the necessary objective of increasing U.S. steel capacity utilization to a financially viable target of 80 percent. However, to do so would require a reduction in the quota or increase in the tariff applied to the remaining countries to offset the effect of the exempted import tonnage.

Exclusions

The Secretary recommends an appeal process by which affected U.S. parties could seek an exclusion from the tariff or quota imposed. The Secretary would grant exclusions based on a demonstrated: (1) lack of sufficient U.S. production capacity of comparable products; or (2) specific national security based considerations. This appeal process would include a public comment period on each exclusion request, and in general, would be completed within 90 days of a completed application being filed with the Secretary.

An exclusion may be granted for a period to be determined by the Secretary and may be terminated if the conditions that gave rise to the exclusion change. The U.S. Department of Commerce will lead the appeal process in coordination with the Department of Defense and other agencies as appropriate. Should exclusions be granted the Secretary would consider at the time whether the quota or tariff for the remaining products needs to be adjusted to increase U.S. steel capacity utilization to a financially viable target of 80 percent.”

RETALIATION??

On February 17, 2018, the Chinese government threatened retaliation if President Trump imposes import restrictions on steel imports.  On February 20, 2018, EC officials stated that they would react “swiftly and appropriately” to Section 232 tariffs placed on EC steel imports into the US.  See https://www.express.co.uk/news/world/921415/harley-davidson-jack-daniels-trade-sanctions-european-union-trade-war-us.

Two of the EC retaliation targets would be Harley Davidson motorcycles and Jack Daniels Bourbon.

WILL PRESIDENT TRUMP IMPOSE IMPORT RESTRICTIONS IN THE SECTION 232 STEEL CASE BY APRIL 11?

My firm belief is that Trump will impose import restraints and the only question is how tough they will be.  Although other commentators have suggested that President Trump might punt and bring a WTO case or more antidumping and countervailing duty cases, my belief is that President Trump wants to levy tariffs because that is what he promised his base. “Damn the torpedoes full speed ahead”.  Trump also believes that all steel imported into the US is dumped and subsidized as the Commerce Department finds dumping and subsidization in almost 100% of the cases.

On February 13th, Breitbart in an article entitled “Chinese Steel Dumping Takes Center Stage as President Trump Mulls Tariffs, Quotas” quoted President Trump in a meeting at the White House with both parties in the House and the Senate:

“Last year, I directed the Secretary of Commerce to investigate whether steel and aluminum imports are threatening to impair U.S. national security,” Trump said. “You see what’s happened with our steel and aluminum industries. They are being decimated by dumping from many countries—in particular one, but many countries.”

That “particular one” Trump was referring to is China. Trump said:

“They are dumping and destroying our industry and destroying the families of workers and we can’t let that happen. Secretary Ross submitted the result of the investigation to me last month. My administration is now reviewing the reports and considering all options. Part of the options would be tariffs coming in as they dump steel, they pay tariffs—substantial tariffs—and the United States would actually make a lot of money, and probably our steel industry and our aluminum industry would come back into our country. Right now, it’s decimated. It will make a decision and I will make a decision that reflects the best interests of the United States including the need to address over-production in China and other countries. You have countries that are so over-producing and what they’re doing is they’re dumping it on us and you look at what empty steel factories and plants and it’s a very sad thing to look at. I’ve been looking at it for two years as I went around campaigning.”

But on February 13th, International Trade 360 in an article entitled, “Lawmakers Caution Trump On Steel Trade Restrictions,” reported:

“A bipartisan group of 19 lawmakers from both chambers of Congress met with Trump at the White House, in a session that was slated to take place behind closed doors before it was abruptly opened up to media members. During the meeting, Trump made clear he is still actively considering import curbs on steel and aluminum in a pair of closely watched cases.

“I want to keep prices down, but I also want to make sure that we have a steel industry and an aluminum industry, and we do need that for national defense. If we ever have a conflict, we don’t want to be buying steel for a country we are fighting … What we are talking about is tariffs and/or quotas,” he said at the meeting. . . .

Though the statute is meant to exclusively address a security threat, the administration has repeatedly signaled that it may use the law as a cudgel against unfairly traded goods. Trump did this again during Tuesday’s meeting, saying that foreign steel and aluminum producers are “dumping and decimating our industries.”

While domestic steel and aluminum producers have repeatedly urged the administration to move forward with steep import restrictions, downstream manufacturers and other stakeholders have preached caution.

Leading that charge at Tuesday’s meeting was Sen. Roy Blunt, R-Mo., who said that the president must thread a delicate needle.

“We need to be careful here that we don’t start a reciprocal battle on tariffs,” Blunt said. “We make aluminum, and we make steel in Missouri, but we buy a lot of aluminum, and we buy a lot of steel as well.”

In one exchange, Sen. Pat Toomey (R‐Pa.) pressed Trump to move “very, very cautiously” and to only go after countries that engage in unfair trading practices. “That’s all countries,” Trump replied.

Sen. Pat Toomey, R-Pa., echoed Blunt’s concerns, urging the president to “go very, very cautiously here.”

In another, Sen. Mike Lee (R‐Utah) warned that restrictions could cost jobs in other industries, but the president dismissed his concerns. “It will create a lot of jobs,” Trump said.

House Ways and Means Committee Chairman Kevin Brady, R-Texas, gave an even blunter assessment of the situation. He likened the Section 232 process to the use of “old- fashioned chemotherapy,” remarking that “it can often do as much damage as good.”

As other lawmakers warned that any tariff hikes or other restrictions could ultimately raise prices on consumers, Trump seemed mostly undeterred, opting instead to focus on the steel and aluminum production jobs such a move might salvage.

“You may have a higher price, but you have jobs,” he said.

“If we ever have a conflict, we don’t want to be buying steel from a country that we’re fighting because somehow that doesn’t work very well,” Trump said at the meeting. “We hopefully will not have any conflicts but … we cannot be without a steel industry. We cannot be without an aluminum industry. So what we’re talking about is tariffs and/or quotas.”

On February 19, 2018, in an editorial the Wall Street Journal warned President Trump on the Section 232 Cases:

“How to Punish American Workers

Steel and aluminum tariffs would cost more jobs than they save.

The economy is picking up steam, but President Trump could reduce the benefits of his tax cuts and regulatory rollback with protectionism. This risk became more serious after the Commerce Department on Friday recommended broad restrictions on aluminum and steel imports that would punish American businesses and consumers. . . .

But the evidence in Commerce’s reports belies this conclusion. And the wide-ranging economic damage from restricting imports would overwhelm the narrow benefits to U.S. steel and aluminum makers.

Start with national security, which Commerce construes broadly to include “economic welfare.” There’s little risk that the U.S. couldn’t procure sufficient steel and aluminum for defense even during a war. Defense consumes 3% of U.S.-made steel and about one-fifth of high-purity aluminum. U.S. steel mills last year operated at 72% of capacity while aluminum smelters ran at 39%. Both have ample slack to raise production for defense and commercial demands. . . .

Commerce nonetheless complains that China has driven down steel and aluminum prices by flooding the global market. Yet Commerce has already imposed 164 anti-dumping and countervailing duties on steel imports including more than two dozen on China. The department has also slapped tariffs on Chinese aluminum. Despite these tariffs, Commerce says rising imports “continue to weaken the U.S. steel industry’s financial health.”

Perhaps Mr. Ross missed the domestic manufacturers’ rosy earnings reports last month. Nucor ’s earnings soared by two-thirds in 2017 to $1.3 billion amid a 35% spike in the price of scrap metal. Steel Dynamics reported record sales, income and shipments last year. Even U.S. Steel posted a $387 million profit after a $440 million loss in 2016. Tariffs have padded profits amid growing U.S. demand.

As for aluminum, 18 smelters have shut down over the last decade amid rising electricity and declining aluminum prices. But production of secondary aluminum from scrap metal has been increasing, resulting in a 3% increase in employment across the industry between 2013 and 2016.

As a remedy for this non-problem, Commerce is proposing a global tariff of 24% on all steel imports; a 53% tariff on a dozen countries including China, Turkey and South Korea; or a global quota equaling 63% of existing imports. For aluminum, Commerce wants a global tariff of 7.7%; a 23.6% tariff on imports from China, Hong Kong, Russia, Venezuela, and Vietnam; or a global quota equal to 86.7% of imports.

Each option would raise prices for U.S. industries such as construction, transportation and mining. About 16 times more workers are employed today in U.S. steel-consuming industries than the 140,000 American steelworkers. Economists Joseph Francois and Laura Baughman found that more U.S. workers lost jobs (200,000) due to George W. Bush’s 2002 steel tariffs than were employed by the entire steel industry (187,500) at the time. Job losses hit Ohio (10,553 jobs lost), Michigan (9,829) and Pennsylvania (8,400).

About a quarter of a car’s cost is tied to steel, which is also a key component of domestically-produced wood chipper knives used in lumber, sawmills and landscaping. The oil-and-gas industry uses steel in drilling equipment, pipelines, production facilities, terminals and refineries. Aluminum inputs make up nearly half of the cost of a beer can.

Raising the cost of steel and aluminum inputs would impel many manufacturers to move production abroad to stay competitive globally. Does Mr. Trump want more cars made in Mexico? Mr. Ross has suggested letting businesses petition the government to exclude certain steel and aluminum products from the quotas or tariffs. But this review would be politicized and cause production delays.

Oh, and don’t forget that other countries could retaliate with trade barriers that hurt American exporters.

Commerce’s recommendations aren’t needed since the steel and aluminum industries are benefiting tremendously from Mr. Trump’s economic agenda. Tax reform is making it less expensive to retool mills, increased defense spending will also lift demand, and the Environmental Protection Agency’s withdrawal of the Obama Clean Power Plan contains electric prices. Why would Mr. Trump undercut his achievements with trade barriers that harm American workers and consumers?”

RETALIATION TARGETS ARE BEING PLANNED

EUROPEAN UNION

Axel Eggert, director general of the EUROFER steel lobby, warned the U.S. not to “pull the trigger on a new trade war,” adding: “The EU has an arsenal of trade remedies and safeguards available to defend its interests. These can be ready to launch in very short order in response to an economic threat, and EU industry will demand their immediate application.”

Gerd Götz, director general of the European Aluminum association, said that none of Ross’ proposed measures would address the root of the problem, which is Chinese overproduction, but instead do “great harm to Europe” ‐ to which the EU would then have to react by imposing trade restrictions, too.  Gotz stated: “We call on the EU to be ready to protect our strategic sectors.”

US GROUPS RAISE RETALIATION CONCERNS

“Business Roundtable also stated that it is concerned that acting on the Commerce Department’s recommendations to use Section 232 to restrict steel and aluminum imports will result in foreign retaliation against U.S. exporters and harm the U.S. economy.

The American Automotive Policy Council, which represents Ford, General Motors and Chrysler‐Fiat, asked Trump to fashion a solution that won’t “diminish the global competitiveness of America’s automotive industry” by leading American carmakers to pay higher prices for steel and aluminum. This would place the U.S. automotive industry, which supports more than 7 million American jobs, at a competitive disadvantage.”

The American Institute for International Steel, which represents foreign steel producers, made the same point and urged Trump to reject Ross’ recommendations, rather than “risk the nation’s well‐being in order to benefit a few politically favored companies.”

AIIS Chairman John Foster stated:

“The national security foundation for the recommended tariffs and quotas is simply an unfortunate attempt to circumvent normally applicable WTO rules.  If the United States chooses to abandon long‐standing principles of free trade that we have helped establish, and that have contributed so much to our national prosperity, Pandora’s box will be opened, and other countries will be sure to assert ‘national security’ reasons for protecting many other politically sensitive products from export competition.

The retaliatory measures that will follow will drive up manufacturing costs, inflate prices, shrink high‐value U.S. exports, and push the United States and the world toward recession.”

On February 21st, in Investors Business Daily in a op-ed piece entitled “Seriously, Steel Industry Protection Is The Wrong Way To Go“, Vernonique de Rugy and Christine A. McDaniel stated:

Their justification is that Chinese and other foreign steel producers benefit from unfair subsidies in their own countries. As a result of foreign competition, domestic steel’s market share is down to 70%. Numbers like this would make any other business owner’s head spin, but these executives think they deserve more. . . .

But for years this industry has avoided competition. As a result, they have not taken the tough steps needed to lean up and succeed on their own. With decades of special protections, billions in subsidies, and bloated executive compensation packages, it is no wonder U.S. producers are not competitive in this market with a low-wage country like China.

Thanks to his statements like last summer’s “Tariffs. I want tariffs,” these well- organized domestic steel executives see an opportunity with a president overly sympathetic to their pleas.

In an ideal world, no government would bankroll domestic companies. The urge to protect our own people against aggressive foreign subsidies is understandable, but not all protections actually help our country.

In particular, import taxes are known to be a net negative for the overall U.S. economy, and with intermediate inputs like steel the costs are more severe. Data from the Bureau of Labor Statistics show that 5.4 million workers are directly employed by steel-using sectors. The American Iron and Steel Institute reports that the steel industry directly employs 140,000 people in the United States. . . .

The steel industry’s historic unwillingness to compete and the government’s continued handouts are why they are in such poor shape today. It is why they are at the doorstep of the White House yet again asking the president, along with every American consumer, for help.

It doesn’t have to be this way.

ALUMINUM

The full Section 232 Commerce report on aluminum is attached, the_effect_of_imports_of_aluminum_on_the_national_security_-_with_redactions_-_20180117.  The attached Commerce Department Summary statement on the Aluminum report, Section 232 Reports _ Department of Commerce, states as follows:

Key Findings of the Aluminum Report:

Aluminum imports have risen to 90% of total demand for primary aluminum, up from 66% in 2012. From 2013 to 2016 aluminum industry employment fell by 58%, 6 smelters shut down, and only two of the remaining 5 smelters are operating at capacity, even though demand has grown considerably.

At today’s reduced military spending, military consumption of aluminum is a small percentage of total consumption and therefore is insufficient by itself to preserve the viability of the smelters. For example, there is only one remaining U.S. producer of the high-quality aluminum alloy needed for military aerospace. Infrastructure, which is necessary for our economic security, is a major use of aluminum.

The Commerce Department has recently brought trade cases to try to address the dumping of aluminum. As of February 15, 2018, the U.S. had two antidumping and countervailing duty orders in place on aluminum, both against China, and there are four ongoing investigations against China.

Recommendations of the Aluminum Report:

Secretary Ross has recommended to President Trump three alternative remedies for dealing with the excessive imports of aluminum. These would cover both aluminum ingots and a wide variety of aluminum products.

A tariff of at least 7.7% on all aluminum exports from all countries, or

A tariff of 23.6% on all products from China, Hong Kong, Russia, Venezuela and Vietnam. All the other countries would be subject to quotas equal to 100% of their 2017 exports to the United States, or

A quota on all imports from all countries equal to a maximum of 86.7% of their 2017 exports to the United States.

Each of the three proposals is intended to raise production of aluminum from the present 48% average capacity to 80%, a level that would provide the industry with long-term viability. Each remedy applies measures to all countries and all steel products to prevent circumvention.

The tariffs and quotas would be in addition to any duties already in place. The report recommends that a process be put in place to allow the Secretary to grant requests from U.S. companies to exclude specific products if the U.S. lacks sufficient domestic capacity or for national security considerations.

Any exclusions granted could result in changed tariffs or quotas for the remaining products to maintain the overall effect.

SECTION 201 ESCAPE CLAUSE SOLAR CELLS/WASHING MACHINE DECISIONS

On January 22, 2018 the United States Trade Representative’s office (“USTR”) announced affirmative Section 201 decisions in the Solar Cells and Washing Machines cases and issued tariffs.

But one interesting point is that the Suniva, the US company that filed the Section 201 Solar Cells case, is majority owned by a Chinese Solar Manufacturer, Shunfeng International Clean Energy Ltd.

The remedies for the two Section 201 are specifically set forth below.

SOLAR CELLS

In the Solar Cells case, the remedy is:

Safeguard Tariffs on Imported Solar Cells and Modules
Year 1 Year 2 Year 3 Year 4
Tariff increase 30% 25% 20% 15%
  • First 2.5 gigawatt of imported cells are excluded from the additional tariff

But in talking to one small solar cell importer, at the most during the year they import a total of 1 megawatt.  This tells me that the new tariffs first will not be retroactive and second probably will kick in after several months each year, when total imports reach the 2.5 Gigawatt level.  According to the Presidential Proclamation, however, the 30% tariff wasapplied to imports starting February 7, 2018.

The 201 tariffs are applicable to imports from almost all countries, including China, Malaysia, Germany, Canada and Mexico, except for the countries excluded in the Annex attached to the Presidential Proclamation.  In future years, when total imports of solar cells and modules reach the 2.5 gigawatt level, the new tariff kicks in.  So, for example, if total imports of solar cells and modules into the US reach the 2.5 gigawatt level on May 15, 2019, imports after that will be hit with a tariff.

WASHING MACHINES

The Washing Machines Remedy is set forth below.  This is similar to the Solar Cells Remedy in the sense that the first 1.2 million washers will have a lower tariff and the higher tariff will not kick in until after total imports reach the 1.2 million unit level.

Also 50,000 units of covered parts are excluded from the tariff.

Tariff-Rate Quotas on Washers
Year 1 Year 2 Year 3
First 1.2 million units of imported

finished washers

20% 18% 16%
All subsequent imports of finished

washers

50% 45% 40%
Tariff of covered parts 50% 45% 40%
Covered parts excluded from tariff 50,000 units 70,000 units 90,000 units

So the point of both remedies is import quickly into the US market.  The first imports into the country in the Solar Cells case will have no tariff and in the Washing Machines case will have a lower tariff.

JANUARY 25 PRESIDENTIAL PROCLAMATION AND EXCLUSION NOTICE IN FEDERAL REGISTER

On January 25th, the Solar Cells Presidential Proclamation with Annexes and exclusions was published in the attached Federal Register notice, FEDERAL REGISTER NOTICE PRESIDENTIAL PROCLAMATION SOLAR CELLS.  According to the Annex I (f), the 30% tariff was applied to imports starting February 7, 2018.

In addition, a number of countries are excluded in Annex 1(b) from the tariff, including India, Ukraine, Indonesia, Turkey and many other countries, so long as their share of imports does not exceed 3%.

On February 14, 2018, the United States Trade Representative’s office (“USTR”) published the attached Federal Register notice, USTR EXCLUSION FED REG NOTICE, and allows companies to petition for exclusion by March 16.  The Federal Register also sets forth a number of exclusions, which were already set forth in the Proclamation.

EXCLUSIONS IN ANNEXES

Some of those exclusions are:

“Presidential Proclamation 9693 of January 23, 2018 (83 FR 3541) excluded certain particular products:

10 to 60 watt, inclusive, rectangular solar panels, where the panels have the following characteristics: (A) Length of 250 mm or more but not over 482 mm or width of 400 mm or more but not over 635 mm, and (B) surface area of 1000 cm2 or more but not over 3,061 cm2), provided that no such panel with those characteristics shall contain an internal battery or external computer peripheral ports at the time of entry;

1 watt solar panels incorporated into nightlights that use rechargeable batteries and have the following dimensions: 58 mm or more but not over 64 mm by 126 mm or more but not over 140 mm;

2 watt solar panels incorporated into daylight dimmers, that may use rechargeable batteries, such panels with the following dimensions: 75 mm or more but not over 82 mm by 139 mm or more but not over 143 mm;

Off-grid and portable CSPV panels, whether in a foldable case or in rigid form containing a glass cover, where the panels have the following characteristics: (a) A total power output of 100 watts or less per panel; (b) a maximum surface area of 8,000 cm2 per panel; (c) does not include a built-in inverter; and where the panels have glass covers, such panels must be in individual retail packaging (in this context, retail packaging typically includes graphics, the product name, its description and/or features, and foam for transport);

3.19 watt or less solar panels, each with length of 75 mm or more but not over 266 mm and width of 46 mm or more but not over 127 mm, with surface area of 338 cm2 or less, with one black wire and one red wire (each of type 22 AWG or 24 AWG) not more than 206 mm in length when measured from panel edge, provided that no such panel shall contain an internal battery or external computer peripheral ports;

27.1 watt or less solar panels, each with surface area less than 3,000 cm2 and coated across the entire surface with a polyurethane doming resin, the foregoing joined to a battery charging and maintaining unit, such unit which is an acrylonitrile butadiene styrene (‘‘ABS’’) box that incorporates a light emitting diode (‘‘LED’’) by coated wires that include a connector to permit the incorporation of an extension cable.”

Emphasis added.

One exclusion that many companies are looking at is “off-grid and portable CSPV panels”, but there are a number of conditions quoted above that must be met to exclude the products in question.

Also the February 14th notice set up a number of criteria that must be met to get any additional exclusion from the Order.

COUNTRIES REQUEST TRADE COMPENSATION AT THE WORLD TRADE ORGANIZATION (“WTO”) FOR SECTION 201 TARIFFS

Article 8.1 of the WTO Agreement on Safeguards, which includes Section 201 tariffs, requires countries proposing to impose a safeguard measure, like Trump’s restrictions on solar and washing machine imports, to compensate other WTO member countries for trade losses. That could be in the form of reduced duties on products of interest to those countries.

The EU, China, Taiwan and Korea have formally asked the U.S. to discuss compensation for trade losses due to President Donald Trump’s safeguard measures on solar cells.

If no agreement is reached on compensation within 30 days of their requests, the EU, China, Taiwan and South Korea can begin proceedings to impose retaliatory tariffs on the U.S. However, the parties would first need to prove to a WTO dispute settlement panel that the U.S. applied the restrictions in a way that violated the safeguards agreement.

In the past, the US has lost a number of Section 201 cases at the WTO for imposing tariffs in a manner that violated the safeguards agreement.

In addition, several Canadian solar manufacturers on Wednesday filed a case at the Court of International Trade in New York City challenging the Trump administration’s imposition of tariffs. The companies say the tariff violates NAFTA and they say the majority of the International Trade Commission found that Canadian solar manufacturers did not constitute a sufficient quantity of U.S. solar imports as to cause injury. They call on the court to enjoin the tariffs and then ask for an expedited resolution of the case.

SOLAR CELLS AND SOLAR PRODUCTS ANTIDUMPING/COUNTERVAILING DUTY CASES

POSSIBLE EXCLUSIONS??

The Commerce Department in the attached preliminary determination in late December, REVOCATION OF SOLAR CELLS ORDER, proposed to exclude certain small solar cells from the Antidumping and Countervailing Duty orders.  Specifically, the proposed exclusion is:

“Excluded from the scope of these orders are panels with surface area from 3,450 mm2 to 33,782 mm2 with one black wire and one red wire (each of type 22 AWG or 24 AWG not more than 206 mm in length when measured from panel extrusion), and not exceeding 2.9 volts, 1.1 amps, and 3.19 watts. No panel shall contain an internal battery or external computer peripheral ports.”

So exclusions are also happening from the AD and CVD orders.

2016-2017 SOLAR CELLS FROM CHINA ANTIDUMPING/COUNTERVAILING DUTY REVIEW INVESTIGATIONS

On February 23, 2018, Commerce published its attached Federal Register notice initiating the 2016-2017 Solar Cells Review Investigation, CHINA SOLAR CELLS REVIEW INITIATION NOTICE.  In that review, Quantity and Value Questionnaire responses are due at Commerce by March 6, 2018.

NEW SECTION 232 CASE AGAINST URANIUM IMPORTS

On January 16th, Ur-Energy USA Inc. and Energy Fuels Resources Inc. filed a section 232 petition at Commerce claiming that imports of uranium from state-owned and state-subsidized companies in Russia, Kazakhstan and Uzbekistan now fulfill 40 percent of U.S. demand, compared to the less than 5 percent satisfied by U.S. production. The Denver-based companies claim that imports from China will grow in the coming years. The companies also argue the volume of imports from Russia will only grow after a decades-old agreement that restricted imports from that country in exchange for suspending anti-dumping duties expires in 2020.  The Petition states:

“The U.S. uranium industry needs immediate relief from imports that have grown dramatically and captured almost 80% of annual U.S. uranium demand. Our country cannot afford to depend on foreign sources — particularly Russia, and those in its sphere of influence, and China — for the element that provides the backbone of our nuclear deterrent, powers the ships and submarines of America’s nuclear Navy, and supplies 20% of the nation’s electricity.”

ITC STUNNER—BOEING LOSES INJURY CASE IN BOMBADIER CIVIL AIRCRAFT CASE AT INTERNATIONAL TRADE COMMISSION (“ITC”)

In the attached decision, ITC-Public-Opinion-Aircraft, on February 13, 2018, in a stunning reversal, the ITC reached a negative, no injury, determination in the Civil Aircraft from Canada/Bombardier antidumping and countervailing duty cases.  In those cases, the Commerce Department had determined that the Canadian government had given subsidies of over 200% to Bombardier and because Bombardier refused to participate at the Commerce Department in the antidumping case, very high dumping margins.

But for the Commerce Department to issue antidumping and countervailing duty orders and for Boeing to win the Antidumping (“AD”) and Countervailing Duty (“CVD”) cases, it had to win the injury case at the ITC.  The ITC found no competition between the Canadian imports and Boeing’s planes and reached a negative, no injury, determination.  When Boeing lost the case at the ITC, it truly lost the case.  The case was terminated and over with.

Prior to the ITC determination, I had predicted that there was a 95% chance that ITC would reach an affirmative, injury determination.  What was the basis for my prediction and why did I get it wrong?  The ITC reaches injury/affirmative determinations in about 2/3 of the cases or about 66%.  But in big ticket cases, like Steel, Lumber and other cases, the ITC goes affirmative in a vast majority of them.  Also in this case, Bombardier had refused to participate in the AD case at Commerce.  That is not looked on kindly by the ITC Commissioners.

But the February 13th decision by the ITC was a true shocker and a real Boeing loss.  One Commissioner, Williamson, is very pro domestic industry.  In many cases where the ITC reaches a negative, no injury, determination, Commissioner Williamson will vote with the domestic industry.  But the ITC decision was a 4-0 unanimous no injury determination.  Why and what does this decision stand for?

First, pursuant to the Statute, the ITC is made up of 6 Commissioners, no more than 3 Commissioners from the same political party.  Right now, however, there are only 4 Commissioners on the ITC and none were appointed by President Trump.  3 Commissioners were appointed by President Obama and Commissioner Williamson originally was appointed by President George W. Bush.

The ITC is a very independent agency, possibly the most independent agency in the US Government because under the Constitution Congress controls trade, not the President.  So Congress wanted its own trade agency and it set up the ITC.  The ITC’s budget goes directly to Congress and does not go through the Administration’s Office of Management and Budget, and the ITC in contrast to every other government agency has the right to represent itself in Court.

The point being is that the ITC is very insulated from trade politics and President Trump has no direct control over the agency.  But more importantly, the ITC’s decision in the Boeing case was a legal determination.  When you read the ITC’s determination, it becomes very clear that the ITC found that imports of 100 to 150 seat aircraft from Canada did not compete with Boeing’s aircraft because Boeing produces bigger airplanes.  Because there were so very few sales in the case, the Commission could zero in on those few sales to Delta.  Based on those sales, the ITC simply could not find enough economic competition between the Canadian imports and Boeing’s planes to justify an affirmative injury determination.

As the Commission stated in certain relevant pages of its determination:

“Nevertheless, the record also shows that the higher standard seating capacity of the [Boeing] 737-700 and 737 MAX 7 limits competition between those models and the [BOMBARDIER] CS100 for some purchasers. Boeing has emphasized that airlines have a strong economic incentive to minimize empty seats by using LCA that are no larger than necessary on particular flights because using an LCA with more seats than required would result in unfilled seats, higher costs per seat, and lower profits. Respondents agree. In a standard two-class configuration, the seat count differential between the CS100 and the 737 MAX 7 is 30 seats, which is greater than the 24 seat differential between the 737 MAX 7 and the 737-800 that Boeing characterizes as significant “for airlines that try to fill every seat on every flight they operate.” Given this, there can be limited competition between the CS100 and the 737-700 and MAX 7 for sales to a purchaser seeking 100- to 150-seat LCA with a seat count toward the low end of the subject range.

The record shows that differences in seat count precluded competition between subject imports and the domestic like product for the only firm order for C Series LCA by a U.S. purchaser. . . .

In sum, we find that there is a likelihood of substantially increased subject import volume and market share based on Bombardier’s single sale for importation of subject planes during the period of investigation. Given that Boeing’s 100- to 150-seat LCA did not meet the purchaser’s requirements for this sale, however, and Boeing did not offer any new aircraft for this sale, we do not find that Bombardier secured this sale at Boeing’s expense. There is also insufficient evidence for us to conclude that Bombardier is likely to secure additional sales for importation of subject 100- to 150-seat LCA in the imminent future, or that any purchases of subject imports in the imminent future would likely be at the domestic industry’s expense. . . .

Based on the preceding considerations, we conclude that subject imports are not likely to have a significant adverse impact on the domestic industry in the imminent future. It is likely that any subject imports that enter in the imminent future would be the result of Bombardier’s single U.S. sale during the period of investigation for which Boeing was not directly competitive. Bombardier has not made any additional sales in the United States. There is insufficient evidence for us to conclude that additional orders for 100- to 150-seat LCA are imminent, that Bombardier would secure these orders, or that any orders secured by Bombardier would come at Boeing’s expense. We are mindful of the statutory requirement that a threat determination may not be made on the basis of mere conjecture or supposition, and thus do not find threat of material injury by reason of subject imports.

  1. Conclusion

For the reasons stated above, we determine that an industry in the United States is not threatened with material injury by reason of imports of 100- to 150-seat LCA from Canada that are sold in the United States at less than fair value and that are subsidized by the GOC.”

Emphasis added.

TWO IMPORTANT POINTS ABOUT THE ITC DETERMINATOIN AND BOEING’S LOSS

The importance of the Boeing negative determination is to make two very important points.  First AD and CVD cases are not nearly as political as you would think.  They are legal determinations, and the ITC can reach a negative no injury determination and turn the entire case off.

The second point is that many respondents in trade cases, especially in China, India and elsewhere, do not understand how important the ITC is in AD and CVD proceedings.  Many respondents simply give up at the ITC.  Bombardier, however, fought the Boeing case during the entire proceeding and mobilized companies and governments to speak out at the ITC about the case in favor of the respondents.  This evened out the playing ground and made it easier for the ITC to reach a negative injury determination if it was inclined to do so.  Bombardier also made sure that there was enough evidence on the ITC’s administrative record to make sure the ITC had the evidence to reach a negative determination.

Although fighting an ITC case takes time, resources and a lot of money to hire lawyers and consultants, Bombardier’s win at the ITC is a total victory.  The case has ended and Boeing lost the case.

BOEING’S WTO FIGHT WITH AIRBUS COULD PROVIDE MORE TRADE RETALIATION

On February 11, 2018 the Seattle Times in an article entitledBoeing’s biggest trade fight could spark a U.S. confrontation with Europe” went on to state about the next big trade fight by Boeing against Airbus and the EC:

“Boeing’s lawyers, still smarting from the shock of losing their U.S. trade- court case against Bombardier’s C Series jets, are now awaiting an imminent ruling in a bigger trade fight over government subsidies.

In a case against Airbus that’s slogged on for nearly 15 years and has seemed endless, Boeing now insists it’s within sight of a final victory.

And though the dispute long predates President Donald Trump, his administration’s hard-nosed “America First” posture on trade disputes – ready to impose tariffs rather than negotiating settlements – adds a new edge of rancor and risk.

The U.S. filed suit against Airbus at the World Trade Organization (WTO) in 2004, and since then the gears of that court have ground slowly without any perceivable impact.

Yet Boeing’s top lawyer, Michael Luttig, said in an interview that the law is about to catch up with Airbus and the European Union (EU).

“Boeing committed itself some 15 years ago … and it has never blinked since,” said Luttig. “Today, we are months away from the imposition of tariffs.”

Airbus is staring back, also refusing to blink

A senior Airbus executive and trade lawyer, who asked not to be named because of the continuing legal proceedings, compared Luttig’s threat of tariffs to “a nuclear strike” and pointed to the parallel EU case before the WTO that accuses Boeing of taking subsidies.

“The EU would be well-prepared to respond in kind and with much greater force,” said the Airbus legal executive. “The EU will survive that first nuclear strike and will retaliate with megatons to the U.S.’s kilotons.”

In a speech in London last month, Airbus CEO Tom Enders said that under Trump, the U.S. is “no longer fighting for opening markets but to close the U.S. market to foreign competitors.”

Citing the CSeries case, he accused Boeing of “ruthlessly surfing on this ‘America-First’ wave.”

The risk that a multinational trade war could erupt with some of the nation’s closest allies looks suddenly higher.

A WTO endgame

In September 2016, after multiple procedural steps and appeals, the last ruling in the United States’ WTO case against Airbus found that the European jet maker had fallen far short of remedying the harm to Boeing from illegal subsidies.

The EU immediately appealed. What’s ahead this year, by late spring, is the final decision on that appeal.

Boeing’s lawyers expect the court to largely uphold the 2016 decision

And Boeing says, that’s it. It’s the end of the appeals.

If Airbus loses, said Bob Novick, Boeing’s outside counsel on the WTO dispute since 2003 and former general counsel to the U.S. Trade Representative, the U.S. would then immediately request authorization to impose retaliatory sanctions.  Boeing anticipates that the WTO will set the level of sanctions at $10 billion to $15 billion.

The U.S. government could then slap punitive tariffs up to that amount on whatever EU goods it selects for maximum political impact.

Boeing’s tough talk may be partly a negotiating ploy. Still, if the WTO hands this loaded weapon to the U.S. government, it’s unlikely the Trump administration’s trade hawks will be shy about using it.

Jeff Bialos, a partner in the international law firm Eversheds Sutherland and a former Commerce Department official handling major trade litigation, said that typically at such an endpoint in a trade dispute, the two governments would negotiate some agreed settlement.

“The issue is, will the Trump administration, with its views on trade . have the ability to negotiate solutions?” Bialos said. “The jury is out. We are going into uncharted waters.”

Bill Perry, a Seattle-based international trade lawyer with Harris Bricken and a former U.S. Commerce Department attorney, thinks Trump will take “a very hard line.”

He pointed to the administration’s imposition last month of tariffs on imported solar panels, to punish China for selling finished panels in the U.S. below their cost, and on washing machines, targeting Korean manufacturers.

“Could this be the first row of bricks in a protectionist wall Trump intends to put up?” Perry asked.

At the very least, the stage looks set for brinkmanship, if not an open trade war.

A duel with pistols drawn

Boeing lawyers expect the imminent threat of tariffs to focus minds in the EU and perhaps to precipitate settlement talks in which they would then have the upper hand.

The top Airbus executive warned that Boeing is on the hook for its own illegal subsidies in the parallel WTO case filed by the EU – and so whatever the U.S. does, the EU can and will match.

“Boeing can try for sanctions. And if they do, we will too,” he said.

In the EU case against Boeing, the last ruling in June found that Boeing had failed to remedy the harm to Airbus from just one set of subsidies: the tax reduction that was part of Washington state’s aerospace incentives.

Boeing has appealed that ruling.

An awkward detail for the EU is that its case against Boeing was filed as a countersuit some nine months after the U.S. filed against Airbus, and so it lags the U.S. case by roughly that amount of time.

The decision on Boeing’s appeal won’t come out until late this year or even next year.  In the meantime, the U.S. may act.  The Airbus executive dismissed the delay between the cases – “a few months” – as insignificant. He compared it to a pistol duel, where one person gets to fire first, but knows that the other will survive and will get a chance to fire back.

The EU will have plenty of ammunition, he contended. When the time comes to add up the compensation needed, he said the EU will count every airplane Boeing sells, including future sales. “Every sale of a 787 is a subsidized sale and every one will count against Boeing when judgment day comes,” the Airbus executive said.

Trade war consequences

If Boeing’s 15-year pursuit of Airbus at the WTO has been tenacious, the legal attack it launched on Bombardier last April was even more fiercely aggressive. And even though it failed, pushing the case had consequences for Boeing.

Geoffrey Geertz, a researcher on the politics of trade at the Washington, D.C.-based Brookings Institution, pointed out that in the Delta jet sale won by Bombardier’s CSeries that was central to the case, “there wasn’t much at stake” for Boeing because it wasn’t offering its own jets against the smaller aircraft.

Yet pursuing the case alienated both the Canadian and British governments, putting at risk large defense contracts, including a contract to supply Canada with F/A-18 jet fighters valued at more than $5 billion.  It also antagonized major commercial-airplane customer Delta. In a subsequent sales campaign in December that mattered much more to Boeing, Delta chose to go with Airbus when it bought100 larger planes.

“Boeing might be rethinking whether that was a miscalculation,” Geertz said.

An open trade war with major economic partners could be even more damaging, not only for Boeing but for the U.S.  That’s a belief central to traditional, pre-Trump Republican Party policy.

President Ronald Reagan in 1986 dismissed congressional demands for import tariffs as “flimflammery” and warned against the dangers of protectionism.

“The truth is these trade restrictions badly hurt economic growth,” Reagan said.

The unpredictable consequences of tariffs are evident in the case of REC Silicon, which produces polysilicon, a raw material used in making solar panels, at a $1.7 billion manufacturing plant in Moses Lake.

The Chinese solar-panel industry once imported polysilicon largely from the U.S.

But after an earlier round of the solar-panel trade fight, China in 2014 retaliated by imposing tariffs on U.S. polysilicon that forced REC to cut 500 jobs.

A letter sent to Trump by REC employees in early January said that “now the remaining jobs are at risk” and urged Trump to announce “a comprehensive settlement” with China.  Instead, Trump applied new tariffs. The risk is a tit or-tat response.

Last month, in retaliation for the Commerce Department’s initiation in December of a trade case against imports of aluminum sheet from China, the Chinese government started its own case against U.S. exports of sorghum grain to China.

“It signals the possible start of a trade war with China,” said trade lawyer Perry in a newsletter to clients this month. “There is a price to pay for U.S. tariffs and trade actions.”

Fight or settle?

No company is more dependent on free trade than Boeing, which sells both its commercial jets and its defense products worldwide.

Yet Boeing sees itself at a huge disadvantage against Airbus because of the types of subsidies the European jet maker has available.

Yes, Boeing gets tax breaks and so pays less tax on the income from the planes it rolls out each year. But it has to take all the risk and shoulder the multibillion-dollar cost when it develops a new airplane.

Airbus gets upfront government loans amounting to billions of dollars to defray the cost in advance – with no repayment necessary if the new airplane project fails.

Luttig insists that “there is no such thing as free trade unless all of the global industry participants abide by the rules.”

“Free trade is, by definition, trade in accordance with the rules of fair trade,” he added.

Airbus says it wants a different endgame to the WTO case: a negotiated settlement that would reset the rules.

The Airbus legal executive said a multinational deal could lay out agreed limits to government support in the aircraft industry for the long-term future.

“We sit down with all participants in this game, including the Chinese, the Russians, the Japanese, the Canadians, the Brazilians and maybe more, and have a good discussion globally,” he said.

Such an agreement might then constrain China’s behavior as its aviation champion COMAC develops future airplanes to compete against Boeing.

Brookings researcher Geertz said pursuing such a settlement makes sense because “the long-term game for Airbus and Boeing is figuring out what they are going to do about COMAC.”

In an interview at Boeing’s Chicago headquarters before the loss in the Bombardier case, Chief Executive Dennis Muilenburg steadfastly eyed his shorter-term target.

“Airbus, as has been determined through the WTO proceedings, has an unresolved more than $23 billion illegal subsidy that still needs to be addressed,” Muilenburg said. “We have to stand on a principle of global fair competition.”

Boeing’s case against Airbus may be stronger than the one against Bombardier.

Still, with one trade-court decision gone awry, Boeing’s leadership must now weigh anew the risks of a trade war against the likelihood that a legal victory could enforce a fair competitive landscape for the future.

BUT TRUMP’S ECONOMIC POLICIES TO DATE HAVE CREATED OTHER RAYS OF LIGHT—A ROARING ECONOMY WITH MANUFACTURING COMING BACK TO THE US—CUTTING TAXES AND REGULATIONS WORKS

As stated in the last blog post, probably the most important development from the trade point of view in the last few months, however, is the passage of the tax bill.  Trump’s economic policies along with the Tax Bill are leading to record economic growth and record unemployment.

On February 1, 2018, in an article entitled “300 firms giving tax cut bonus, Costco dismisses Pelosi’s ‘crumbs’ attack,” the Washington Examiner stated:

“The number of companies offering employees higher wages, expanded insurance and retirement benefits and cash bonuses up to $3,000 has surged to 300 as more see benefits from the new GOP tax cuts.

The payouts, praised by President Trump, are going to some 3 million employees.

Again on Thursday at a Massachusetts town hall, House Minority Leader Nancy Pelosi called the bonuses “crumbs.”

Not only are companies crediting Trump in their announcements, one major employer, Costco, disputed Democratic sneers that the bonuses are “crumbs” and hide bigger profits.

During a shareholders meeting this week, Costco chief Craig Jelinek said the attack by Pelosi was not “thoughtful.”

According to the National Center for Public Policy Research, the comments came in response to a question from their counsel Justin Danhof. What’s more, said Danhof, Jelinek said that critics were just “throwing stuff out there.”

The Costco executive noted that the wholesaler pays higher than average wages and added that the tax cuts may benefit customers.

The growing list of companies paying so-called “Trump bonuses” is at 300, according to list keeper Americans for Tax Reform and ATR Vice President John Kartch.

ATR President Grover Norquist said, “Every two weeks from February to November Americans will be reminded that one party cut their taxes and raised their pay. And the other tried to stop it.”

According to the Americans For Tax Reform, the actual number today February 23, 2018 is over 400 companies and includes the following companies:

“Plexus Corp., Solara Company, Kraft Heinz Company, CUNA Mutual Group, CarMax Inc., Valley Bank, Quake Manufacturing, Wirco Inc., Blue Cross and Blue Shield of North Carolina, Prospector Hotel and Gambling Hall, Fontainebleau, Mission Produce, Mastercard Inc., Civista Bank, Gulf Power Company, Fidelity Bank, Dyersville Die Cast, Unum, Sheely’s Furniture and Appliance, Henry Schein, Inc., R+L Carriers, The Gateway Tavern, OneMain Holdings, Inc., The Stowaway, Duck Inn Pub, Sail Loft, Speedwell Tavern, Pilgrim Bank, Xante Corporation, J.M. Smucker Company, Iowa-American Water Co., Somerset Savings Bank, Amboy Bank, Citizens Bank of West Virginia, Dot Foods, Sound Financial Bancorp Inc., Pitney Bowes, Shred-X, LiDestri Food and Drink, U.S. Special Delivery, Huntington Ingalls Industries, Middlefield Banc Corp., Cintas Corporation, PepsiCo., Protective Life Corporation, St. John’s Properties Inc., Insperity, U-Haul, Leak Sealers, Mill Steel Company, Payne Trucking.”

Some of the other additional companies on the list are:

“1A Auto, Inc. (Westford, Massachusetts), 1st Source Corporation (South Bend, Indiana), 1st Summit Bank (Johnstown, Pennsylvania), AaLadin Industries, Inc. (Elk Point, South Dakota), AAON (Tulsa, Oklahoma), AbbVie, Inc. (North Chicago, Illinois), Adams Community Bank (Adams, Massachusetts), Advance Financial (Nashville, Tennessee), Advanced Sciences and Technologies, LLC (Berlin, New Jersey), Aflac (Columbus, Georgia), Ally Financial Inc. (Charlotte, North Carolina), Altria Group Inc. (Richmond, Virginia), Amarillo National Bank (Amarillo, Texas), Amboy Bank (Old Bridge, New Jersey), American Airlines (Ft. Worth, Texas), American Express (New York, New York), American Family Insurance (Madison, Wisconsin), Apple (Cupertino, California), AT&T (Dallas, Texas), AutoNation, Bank of America (Charlotte, North Carolina), BB&T (Winston-Salem, North Carolina), Best Buy (Richfield, Minnesota), Boeing Company (Chicago, Illinois), Cabot Oil & Gas Corporation (Houston, Texas), Capital One (McLean, Virginia), CarMax Inc. (Richmond, Virginia), The Charles Schwab Corporation (San Francisco, California), Charter Communications, Inc. (Stamford, Connecticut), Chipotle Mexican Grill (Denver, Colorado), Cigna Corporation (Bloomfield, Connecticut), Comcast (Philadelphia, Pennsylvania), Exxon Mobil, FedEx (Memphis, Tennessee), Fiat Chrysler (Auburn Hills, Michigan),  Home Depot (Atlanta, Georgia), Honeywell (Morris Plains, New Jersey), Hostess Brands, Inc. (Kansas City, Missouri), Humana (Louisville, Kentucky), Smucker Company (Orrville, Ohio), JPMorgan Chase & Co. (New York, New York), JetBlue (New York, New York), Kraft Heinz Company (Pittsburgh, Pennsylvania and Chicago, Illinois), Lowes (Mooresville, North Carolina), Mastercard Inc. (Purchase, New York),  Merck (Kenilworth, New Jersey), MetLife Inc. (New York, New York), Nationwide Insurance (Columbus, Ohio), Pfizer Inc. (New York, New York).”

The point is that the entire list of companies providing bonuses, increases in 401Ks and other contributions to both employees and customers because of the tax bill is mind numbing.  The entire list can be found at Americans for Tax Reform at https://www.atr.org/list.     

One can disagree with President Trump, but the fact is he is putting money back into the average American’s pocket.

The good news keeps on coming.  On February 13th Bloomberg reported:

“Optimism among small companies in the U.S. rose more than forecast in January, fueled by a record number of owners who said now was a good time to expand, according to a National Federation of Independent Business survey released Tuesday.

Six of the 10 components that make up the small-business optimism index increased in January, producing one of the strongest readings in the 45-year history of the survey. The figures show sustained, sturdy business sentiment since the November 2016 election. A measure of plans to boost capital spending in coming months increased by 2 points to 29 percent, consistent with other data indicating robust outlays for equipment. One in five small companies said they plan to boost hiring, unchanged from the prior month, as finding qualified workers remains problematic and underscores a tight job market.The new tax law “produced the most recent boost to small-business optimism,” NFIB’s William Dunkelberg and Holly Wade said in a report. “And federal government-related cost pressures continue to abate, offering a more supportive business climate for small firms. Consumer spending remains supportive, and business spending and housing remain strong.”

The bottom line is that many average Americans are being affected positively by the Trump tax bill.  This may explain why on February 23rd the Rasmussen Reports stated that Trump’s popularity had shot to 50%.  The tax bill is a gift that will keep on giving to Trump and the Republican party.

SECTION 301 CASE AGAINST CHINA ON FORCED TECHNOLOGY TRANSFERS

In an attached August 18th Federal Register notice based on an August 14th Presidential Memorandum, 301 INITIATION NOTICE Presidential Memorandum for the United States Trade Representative whitehouseg, President Trump pulled the trigger on the Section 301 Intellection property case against China.  The Section 301 investigation could take a year and probably will lead to negotiations with the Chinese government on technology transfer.  If the negotiations fail, the US could take unilateral action, such as increasing tariffs, or pursue a case through the World Trade Organization.  Unilateral actions under Section 301, however, also risk a WTO case against the United States in Geneva.

The United States Trade Representative (“USTR”) held a hearing on October 10th at the International Trade Commission.  During the October 10th hearing, only two US companies appeared to argue that their IP was stolen by Chinese government actions.

Acting Assistant USTR for China Terry McCartin, commenting on the dearth of business witnesses, said some companies had expressed concern “about retaliation or other harm to their businesses in China if they were to speak out in this proceeding.”

On January 18th, it was reported that President Trump was considering a big “fine” as punishment for China’s alleged theft of intellectual property.  In an interview, Trump stated,

“We have a very big intellectual property potential fine going, which is going to come out soon.”

Although Trump did not define what he means by “fine,” Section 301 allows the US to impose retaliatory tariffs on Chinese goods or other trade sanctions until China changes its policies.

Trump further stated:

“We’re talking about big damages. We’re talking about numbers that you haven’t even thought about.”

Trump said he will be discussing this action in his State of the Union address on January 30th.  Trump also recently stated that he hopes there will not be a trade war with China. “I don’t think so, I hope not. But if there is, there is.”

NAFTA NEGOTIATIONS CONTINUE AND PROBABLY WILL NOT BE TERMINATED

NAFTA negotiations continue and there is hope that the agreement will not be terminated.  But no one can say for certain at this time.

TRADE ADJUSTMENT ASSISTANCE FOR FIRMS/COMPANIES – A BETTER ALTERNATIVE TRADE REMEDY WHICH ACTUALLY WORKS

As stated in numerous past newsletters, there is another more productive way to solve the Steel crisis and fix the trade problem and help US companies, including Steel and other companies, adjust to import competition.  This program has a true track record of saving US companies injured by imports.

This was a problem personally approved by President Ronald Reagan.  The Trade Adjustment Assistance for Firms/Companies program does not put up barriers to imports.  Instead the TAA for Companies program works with US companies injured by imports on an individual basis to make them more competitive.  The objective of TAA for Companies is to save the company and by saving the company it saves the jobs that go with that company.

But as stated in the video below, for companies to succeed they must first give up the mentality of international trade victimhood.

In contrast to TAA for workers, TAAF or TAA for Companies is provided by the Economic Development Administration at the Commerce Department to help companies adjust to import competition before there is a massive lay-off or closure.  Yet the program does not interfere in the market or restrict imports in any way.

In addition, the Federal government saves money because if the company is saved, the jobs are saved and there are fewer workers to retrain and the saved company and workers end up paying taxes at all levels of government rather than being a drain on the Treasury.  To retrain the worker for a new job, the average cost per job is $50,000.  To save the company and the jobs that go with it in the TAA for Companies program, the average cost per job is $1,000.

Moreover, TAA for Firms/Companies works.  In the Northwest, where I am located, the Northwest Trade Adjustment Assistance Center, http://www.nwtaac.org/, has been able to save 80% of the companies that entered the program since 1984. The Mid-Atlantic Trade Adjustment Assistance Center, http://www.mataac.org, uses a video, http://mataac.org/howitworks/, to show in detail how the program resulted in significant turnarounds for four companies. The reason the TAA for Firms/Companies is so successful—Its flexibility in working with companies on an individual basis to come up with a specific adjustment plan to make them competitive once again in the US market as it exists today.  For a sample recovery plan, see http://mataac.org/documents/2014/06/sample-adjustment-plan.pdf, which has been developed specific to the strengths, weaknesses and threats each company faces.

But TAA for Companies has been cut to the bone.  On August 22, 2017, the U.S. Commerce Department announced $13.3 Million to Boost Competitiveness of U.S. Manufacturers.

Are such paltry sums really going to help solve the manufacturing crisis in the Steel and other industries?  Of course not!!

But when the program was originally set up, the budget was much larger at $50 to $100 million.  If the program was funded to its full potential, yes steel companies and other companies could be saved.

To those libertarian conservatives that reject such a program as interference in the market, my response is that this program was personally approved by your icon, President Ronald Reagan.  He understood that there was a price for free trade and avoiding protectionism and that is helping those companies injured by import competition.  But teaching companies how to be competitive is a much bigger bang for the buck than simply retraining workers.  And yes companies can learn and be competitive again in the US and other markets.

NEW RECENT TRADE CASES

ANTIDUMPING AND COUNTERVAILING DUTY CASES

CAST IRON SOIL PIPE

On January 23, 2018, Cast Iron Soil Pipe Institute filed antidumping and countervailing duty case against Certain Cast Iron Soil Pipe from China.

RUBBER BANDS

On January 30, 2018, Alliance Rubber Co. filed antidumping and countervailing duty cases against Certain Rubber Bands from Thailand, China, and Sri Lanka.

UNIVERSAL TRADE WAR CONTINUES

FOREIGN ANTIDUMPING AND COUNTERVAILING DUTY LAW AND CASES

CHINA AD/CVD NEWSLETTERS

Attached are newsletters from Chinese lawyer Roland Zhu and his trade group at the Allbright Law Office about Chinese trade law and ongoing Chinese trade cases. Team’s newsletter-EN Vol.2018.04 Team’s newsletter-EN Vol.2018.05 Team’s newsletter-EN Vol.2018.06 Team’s newsletter-EN Vol.2018.07

SECTION 337 AND IP CASES

FUEL PUMP ASSEMBILES

On January 31, 2018, Carter Fuel Systems, LLC filed a section 337 case against imports of Fuel Pump Assemblies Having Vapor Separators.  The named respondent in the case is:

Wenzhou Jushang (JS), Performance Parts Co. Ltd., China.

JUMP ROPE SYSTEMS PRODUCTS

On February 13, 2018, Jump Rope Systems LLC filed a section 337 case against imports of Jump Rope Systems Products.  The named respondent in the case is:

Suzhou Everise Fitness Co., Ltd., China.

If anyone has any questions about these cases or about the Trump Trade Crisis, Taxes and Trade, Section 201 Solar Case, Section 232 case on Steel, Aluminum or Uranium or US trade policy, the antidumping or countervailing duty law, trade adjustment assistance, customs, False Claims Act or 337 IP/patent law, please feel free to contact me.

Best regards,

Bill Perry

US CHINA TRADE WAR–TRUMP TRADE CRISIS, NAFTA NEAR COLLAPSE, NO FTAS, THIRD COUNTRIES BEAT US OUT ON TRADE DEALS, AD CASES MORE POLITICAL, NO SYMPATHY FOR BOMBARDIER, 201 SOLAR, 301 CHINA, TAA FOR COMPANIES

Winder Building United States Trade Representative Washington DC. United States Trade Representative is chief US trade negotiator. Winder Building created 1848

TRADE IS A TWO WAY STREET

“PROTECTIONISM BECOMES DESTRUCTIONISM; IT COSTS JOBS”

PRESIDENT RONALD REAGAN, JUNE 28, 1986

US CHINA TRADE WAR OCTOBER 20, 2017

Dear Friends,

Having just returned from a month-long trip to Europe, the trade situation under the Trump Administration has heated up to the boiling point, but the target is not just China.  The Trump Administration appears to be attacking all trade with the firm belief that all prior trade deals that the US entered into were a raw deal.  NAFTA negotiations are at a standstill, and many believe Trump’s real intention is to kill NAFTA.

The United States is at a trade crossroads and apparently Trump and his supporters have decided to become much more protectionist, while the rest of the World is moving to free trade agreements.

As also stated below, directly contrary to statements by Trump supporters, the Trump trade policy is not a continuation of President Reagan’s trade policy.  Although President Reagan took pragmatic trade actions when he had to, he was a strong free trader and we know that was his position because he said so.

President Trump is very protectionist and truly does not want free trade deals.  He ripped up the TPP with no attempt at renegotiation.  He has made such strong demands of Canada and Mexico that he knows they will reject with the purpose of eventually killing the deal.

The decisions on TPP and NAFTA have been taken without any real idea of the negative ramifications, the costs, of terminating these deals on US farmers and corporations, many of which have interconnected supply chains that have been finely calibrated to produce lower cost consumer products so as to be competitive with lower priced imports of that final product from China.  Many believe that the real effect of killing NAFTA will be to move production to China or other lower cost countries.

Moreover, Trump won the election because of rural states and the farmers in those rural states but US agriculture is dependent on exports.  When Trump slams trade, he slams his own constituents, farmers in the rural states, which elected him as President.

One of the other losers in the Trump trade policy besides agriculture will be the high tech companies because these two sectors will bear the brunt of the trade retaliation that is coming.

Trump wants to protect the low tech industry, the Steel industry with its 141,000 jobs and the heck with everyone else.

The Trump trade policy is based on one arrogant presumption—the US market is the largest in the World and the rest of the World must kowtow, come on bended knee, to get into the US and that fact gives the US leverage.  But that fact is no longer true.  The 11 countries in the TPP have a larger market than the US.  China has a larger market than the US.

In fact, Canada and Mexico already can fall back on trade agreements they have with other countries, such as Europe.  The United States does not have that luxury.  The US decision by both Trump and the Democrats to go protectionist is further isolating the US in the trade area and is having and will have major negative economic ramifications on the US economy.  The chickens will come home to roost.

Maybe instead of ripping up trade agreements and making US producers less competitive it is time for the United States to find a way to make its companies more competitive in the US and international markets as they exist now rather than erect protectionist barriers to international competition.  Maybe the US should turn to an existing program, which has saved companies injured by imports, the Trade Adjustment Assistance for Firms/Companies program.

Commerce has made antidumping and countervailing duty investigations more political, but the EC wants to change China’s nonmarket economy status to allow a case by case determination.

But there is no sympathy for Bombardier in the Boeing fight at the Commerce Department in Civil Aircraft Preliminary determinations as Bombardier refused to cooperate with the Commerce Department’s antidumping investigation leading to a decision of all facts available.  So there will be no negotiated agreement in that case.  Bombardier has decided to jointly produce the plans with Airbus at its Mobile, Alabama plant, but it is questionable whether that will really work.

The US International Trade Commission (“ITC”) reached an affirmative injury determination in the Solar Section 201 case and now it moves to remedy phase.

USTR has also initiated a section 301 case against forced technology transfers in deals with China, but not many companies showed up for the USTR hearing. This may reflect the point made by my partner, Dan Harris, in his August 30, 2017 article “China US Trade Wars and the IP Elephant in the Room” that many US companies make the mistake of simply handing over their IP rights to Chinese joint venture companies with no protection. The US government cannot protect US companies from stupid mistakes.

Meanwhile, the Section 232 Steel and Aluminum cases remain on hold.

In a decision near and dear to my heart, USTR is charging ahead with a Wine case against BC and Canada at the WTO and now EC, Australia, Argentina and other countries are interested.    Canada and BC’s protectionist position on Wine play right into Trump’s argument that NAFTA is not a free trade agreement.

China has filed an antidumping and countervailing duty case against the United States.  More Antidumping and Countervailing Duty and 337 cases have been filed against China and the trade issue could well become the most important issue in upcoming elections.

If Trump makes unwise protectionist decisions, the US economy will be hurt, jobs will be lost and he will lose in the next election.

If anyone has any questions or wants additional information, please feel free to contact me at my e-mail address bill@harrisbricken.com.

Best regards,

Bill Perry

TRADE AT A CROSSROADS AND IT’S NOT JUST CHINA

Prior to his election, with Trump complaining during the election about China so many times, many voters would have believed that Trump’s primary target in the trade area would be China.

But nine months after his inauguration, it is becoming clearer that Trump’s real target is trade in general.  We are at a trade crossroads, and the Trump Administration with substantial support from the Democrats apparently has decided to move down a very protectionist road.

Trump and his Administration firmly believe that the United States has gotten a raw deal in all the trade deals it has entered into.  In effect, Trump sees trade as economic warfare and the United States is losing the war.  When economic competition from imports causes problems for US companies, it must be unfair trade caused by unfair trade deals.

Although Trump will mouth free trade, when Trump pulled out of the Trans Pacific Partnership, it was the first Free Trade Agreement that the United States had ever refused to join.  As described below under the Costs article, this action has put US exporters, including farmers, at a distinct cost disadvantage in World markets and caused enormous economic damage to Trump’s own constituents, workers and farmers.  Many experts believe that there is a better than 50% chance that Trump will pull out of NAFTA.  See articles below from Wall Street Journal and John Brinkley at Forbes about the costs of pulling out of NAFTA.

But killing the TPP and potentially killing NAFTA gores the agriculture ox.  This is the one fly in the ointment, flaw in Trump’s entire economic strategy.  If the Trump trade policy hurts farmers, Trump could lose the rural states: Iowa, Kansas, North Dakota, South Dakota, Montana, Wisconsin, Oklahoma, and Arkansas, to name a few and that could lead to Trump’s loss in the next Presidential election.  In contrast to arguments made by Trump supporters, rural states are not just manufacturing, they are farmers, agriculture, and one half of all US produced agricultural prorducts is exported.

In addition to agriculture, high tech companies will also be hit as they are perfect retaliation targets and all the side agreements on digital and IP protection in the TPP Agreement have died and will die.

Trump supporters attack not only the trade deals, but the WTO itself because ceding power in a trade deal or to the WTO is giving away the sovereignty of the US people.  The WTO’s job, however, is to provide a forum for negotiations and adjudication of trade disputes between different sovereign countries.  The United States simply cannot dictate its trade policy to other sovereign countries.  It must negotiate trade agreements.  If that be globalism, then so be it.

The real issue is what is the US interest in trade negotiations.  The trade deals that the Trump supporters attack were negotiated by the US government and then approved by Congress.  Are all treaties that create multi-government organizations as a forum for negotiations and adjudication of international disputes to be attacked because they result in giving away US sovereignty?  If so, the World returns to 1914, World War 1, and the Guns of August.  The United States has to negotiate with other sovereign countries.  And in negotiation with other sovereign countries, the United States does not always get everything it wants to get.  That is the essence of negotiations.

As stated before, the simplistic Trump approach to trade is that the United States is the largest market in the World and countries must kowtow to get into the US market.  But that is no longer true.  The remaining countries in the TPP represent a larger market than the US.  That is why during the push for Trade Promotion Authority in the House of Representatives, House Speaker Paul Ryan stated that 75% of all consumers are outside the United States.

The Trump supporters also look at economic competition as economic warfare and, therefore, the United States must win each trade deal.  But as stated below, President Reagan himself believed that economic competition is good for the United States because it is the essence of free markets.

WOULD PRESIDENT REAGAN HAVE SUPPORTED TRUMP’S ECONOMIC PROTECTIONIST NATIONALISM?—I THINK NOT

One of the basic arguments of the Trump supporters in the Trade area is that Trump’s trade policy is simply an extension of Reagan’s trade policy and, therefore, President Ronald Reagan would have supported the protectionist economic nationalism of Donald Trump.  In effect, these supporters argue all trade deals in the past, including NAFTA and China’s entry into the WTO, were raw deals that hurt the US working man.  These supporters argue that the trade deals are the reason for the loss of millions of US manufacturing jobs and even a major reason for the US budget deficit.  Therefore, President Reagan would have opposed all of these trade deals.

But I too was in the US government during the Reagan Administration, admittedly not a political appointee, but as a line attorney at the US International Trade Commission and the Commerce Department.  I do not remember the Reagan trade policy in the same way as being overly protectionist.  I remember a President, who was the most Free Trade President of my generation, who firmly believed in the power of the free market and economic competition.  Although President Reagan took tough trade actions as needed, he also knew that in the long run protectionism would not work because the US companies themselves would only become weaker.  Reagan’s real trade policy is indicated by his actual words and actions, not summary statements by conservative pundits.

Reagan also understood that when dealing with trade, we are dealing with the interests not only of the United States, but the interests of other countries.  Although the US should always represent its own interests first, it cannot dictate the outcome to other countries, because it does not have the power to do so.  The EC, China, Mexico, Canada, Japan, and Australia are sovereign countries too, and they have a say in international trade negotiations.

On October 14, 2017, at the Values Summit in Washington DC, Fox Contributor Laura Ingraham stated that Reagan was an economic populist and pointed to the 45% tariff issued by President Reagan in the Harley Davidson Motorcycles case and the large duties of 100% against Japanese electronics, such as semiconductors.  She then argued that President Trump’s stance on trade was simply a continuation of the Reagan trade policy.  See https://www.youtube.com/watch?v=qofqnUHPGnc.

During the speech, Ingraham stated that every Free Trade Agreement must be either rewritten or repealed and that Trump like Reagan understands the working class and the need to protect US industry and jobs.  She pointed to present USTR Robert Lighthizer, the former Deputy USTR under Reagan, as an example of Trump’s sterling trade policy.

But I too worked in the Reagan Administration and later under Robert Lighthizer.  I simply do not remember it the way Ingraham and Robert Lighthizer, the current USTR, remember it.  In the Harley Davidson Motorcycles case, for example, which happened when I was in the General Counsel’s office at the US International Trade Commission, Harley brought a case under Section 201, the Escape Clause, allowing Harley to get short term temporary protection from imports.  After winning the case and after Reagan issued a temporary tariff on imports of motorcycle subassemblies from Japan (Japanese companies had manufacturing facilities in the US too), Harley after only two years asked the Reagan Administration to lift the temporary tariff because it had adjusted to import competition.

Contrast that tariff relief with the tariff relief provided to Mr. Lighthizer’s client in the Steel Industry—30 plus years of protection from imports from many, many antidumping (“AD”) and countervailing duty (“CVD”) orders issued under US AD and CVD laws.  That is not temporary tariff relief; that is permanent tariff relief.  Despite that protection for decades, the US steel industry has declined with Bethlehem Steel going out of business, just as President Ronald Reagan himself predicted.  Trade protection only slows the decline of industries; it does not cure the disease.

Ms. Ingraham’s speech parallels the statements she recently made in her book “Billionaire at the Barricades”, which articulates very well the thinking and many of the arguments from the Trump Administration and his supporters against trade and trade agreements in general.  In the book, Ms. Ingraham states, “Except for Reagan, all modern presidents of both parties campaigned as populists but governed as globalists.”  And that Conservative Populists “are against huge trade deals and international organizations like the World Trade Organization because they take power out of the hands of voters and give it to a far-away and often hostile global elite.”  Page 43.

Ingraham also attacks all trade deals, especially NAFTA, the North American Free Trade Agreement between Mexico and Canada, and China’s entry into the WTO, along with the WTO itself.  With regards to NAFTA, Ingraham states:

“but Perot and millions of Americans—the kind who don’t worship at the Wall Street Journal’s altar of globalism and internationalism for profit’s sake—knew it was a raw deal for workers and bad for America. The biggest “tell” that NAFTA was going to be a boon for elites and a bust for everyone else was the fact that George H. W. Bush and Bill Clinton (as well as their Donor Class” pals) all supported the monstrosity.”

Billionaires at the Barricades at 313 (footnotes omitted).

According to Ingraham, Clinton promised that NAFTA would:

“create the world’s largest trade zone and create 200,000 jobs in this country by 1995 alone . .  .Clinton not only lied, he made a “pledge” to the American working class who opposed NAFTA that they would receive “gains.”

They received pink slips instead.

The populists’ NAFTA predictions proved painfully prescient. Between 1993 and 2013, the U.S. trade deficit with Mexico and Canada went from $17 billion to $177.2 billion.  . .

The effects on American workers have been even more catastrophic. EPI data concluded that in just 10 years, NAFTA was responsible for displacing 851,700 American jobs. To put that in context, that’s more people than live in Columbus, Ohio. “All of the net jobs displaced were due to growing trade deficits with Mexico”.  .. .The destruction of nearly one million jobs and the implosion of American manufacturing—that’s Bill Clinton’s NAFTA legacy.”

Billionaires at the Barricades at 385 to 389.

But Ingram forgets to mention that since NAFTA was enacted, total trade among these three countries has increased from $290 billion in 1993 to $1.1 Trillion in 2016 and that trade was not solely imports, but also US exports to those countries.  According to the US Chamber of Commerce, six million US jobs are dependent on US trade with Mexico.

Ingraham then goes on to attack the decision to let China into the WTO:

“If NAFTA had unleashed a flood of dangerous economic currents crashing into the American working class, his [Clinton’s] decision to pave the path for China’s entry into the World Trade Organization (WTO) by giving it Permanent Normal Trade Relations (PNTR, now known as Most Favored Nation) status swelled into an outsourcing tidal wave. Millions of American manufacturing jobs were washed out to sea – the South China Sea, that is. . .  .

It is “one of the most important foreign policy developments” if you want to understand the destruction of American manufacturing. It is also “one of the most important foreign policy developments” for understanding how millions of U.S. manufacturing jobs were vaporized in record speed, even as China grew at a steroidal rate of muscular economic growth.

Let’s start with the basics. The World Trade Organization was officially created during Bill Clinton’s presidency in January 1995, but it had existed in other forms since 1948. . . .

“Seventeen years hence, it is difficult to overstate the economic destruction wrought by China’s entry into the WTO and Congress and President Clinton’s decision to grant the Chinese permanent” “Most Favored Nation status. A 2016 analysis published in the Annual Review of Economics concluded that between 1999 and 2011, America lost between 2 and 2.4 million jobs.  Others, like the left-leaning Economic Policy Institute, put the American jobs loss figures even higher at 3.2 million jobs, when calculated between the years 2001 and 2013.50

The brutal economic reality was a cruel reversal of Clinton’s promises: all the gains were on the Chinese side, all “the losses and devastation were America’s. American manufacturing jobs were eviscerated. From 2001 to 2011, U.S. manufacturing jobs plunged from 17.1 million to 11.8 million.51 That’s a loss of 5.3 million manufacturing jobs, a figure that’s nearly the population of the entire state of Minnesota.

The narrowing of the trade deficit between the United States and China never materialized either. To the contrary, it exploded. In 2000, the annual trade in goods deficit with China stood at a towering $84 billion. After Clinton ushered China to the front of the line, the trade deficit more than quadrupled to a jaw-dropping $367 billion by 2015.  The year before America let China join the WTO (1999), the United States accounted for 25.78 percent of world GDP. By 2014, that figure had dropped to 22.43—the lowest it has been in government records going back to 1969, according to the Economic Research Service of the U.S. Department of the U.S. Department of Agriculture. In 1999, China’s annual GDP was $1.094 trillion. In 2015, it was more than $11 trillion. In 1999, the U.S. national debt was $5.7 trillion (the good ol’ days!). Today, after the big government globalist policies of the last several presidents, U.S. national debt stands at a mind-bending $20 trillion.”

Id. at 415, 417, 427-431 (footnotes omitted).

Let me make one point very clear.  The China WTO Agreement is not a Free Trade Agreement.  Before China entered the WTO, it was already exporting substantial exports to the US.  I know because I represented Chinese companies and US importers in many antidumping cases long before China entered the WTO.  What China’s entrance into the WTO allowed the US to do was to gain leverage with China by putting Chinese trade practices into a forum, the WTO, which gave the US the ability to call some of China’s trade practices into account and discipline them.  The United States has brought many cases against China at the WTO and won many and caused China to change its trade practices, but it should be noted that China has brought cases against the US at the WTO, especially in the antidumping and countervailing duty area, and won many too.

As Charlene Barshefsky, the USTR, who negotiated the US China WTO Agreement, recently stated to the Wall Street Journal in answer to the question whether China’s entry into the WTO accounted for its enormous economic growth:

”No, I don’t think he’s right. If you go back to the mid-1990s, you saw a China that was already growing at about 8%, 8.5% a year, with the world’s largest standing army, a nuclear power, a permanent member of the U.N. Security Council, a fifth of the world’s population, a reformist premier, Zhu Rongji, and willing to orient toward the West.

In the course of doing the WTO negotiation, China opened its market. The U.S. didn’t alter its trade regime, nor did any other country alter  its trade regime. As in any WTO negotiation, it is the acceding country that needs to reform its economy.

The key point is that, in the context of a country as large as China entering, were there protections built into the agreement to prevent, for example, unexpected surges of imports? And indeed, there were—a mechanism almost never used by the very industries Steve Bannon is pointing to, although it would’ve been entirely protective of their interests.”

To see what Ms. Barshefsky believes is the real China trade problem see the video at https://www.wsj.com/articles/the-impact-of-china-joining-the-wto-1495504981.

During that interview, Barshefsky pointed to the real China problem.  After 2006 China has shifted to a more protectionist trade policy pushing US and other foreign companies and foreign imports out of China.  The Trump trade policy rightly so could demand more reciprocity from China and demand that China drop its barriers to US imports and investment.

On the other hand, killing all trade with China is not the answer.  Although Ms. Ingraham points to the deficits, China has become the largest importer of US products.  On August 21st, in an editorial entitled “Yes, China Steals U.S. Intellectual Property, But That Doesn’t Mean Trade With China Is A Bad Thing” Investors Business Daily states:

“But didn’t the flood of Chinese factory-made goods to the U.S. decimate American manufacturing during this period? That’s a myth. As the U.S. Federal Reserve’s monthly manufacturing index shows, from 2000 to 2006 American factory output rose a healthy 11.5%. It wasn’t decimated by the surge in Chinese exports to the U.S. It only crashed when the financial crisis hit.  . . .

We hope a negotiated solution can be found. At the same time, we might want to think seriously about it before we back a giant U.S.-China trade war that could make all of us, Americans and Chinese, much worse off.”

In addition, when Ms. Ingraham quotes economic data from left leaning groups, she should keep in mind that these groups are very big supporters of labor unions, which provide the backbone of the Democratic Party.  Labor unions traditionally have been very, very protectionist, anti-free market and economic competition, very anti-Republican and very pro- Democratic party.  That is why Senator Chuck Schumer, who Ingraham does not like, supports the Trump protectionist trade policy, but Schumer believes that Trump is not being protectionist enough.   Chuck Schumer’s views are not the views of President Ronald Reagan.

But Ms. Ingraham also states that:

“Trump’s critics would do well to examine the election data on working-class rural Americans—a group who overwhelmingly went for Trump’s message of economic nationalism. Rural voters accounted for nearly one out of five votes in 2016 and were a pivotal part of Trump’s successful Rust Belt strategy. NBC News exit polls revealed that Trump beat Clinton 57 to 38 percent among Michigan’s rural voters (Romney carried the same group but by only seven percentage points). Among Pennsylvania rural voters, Trump destroyed Clinton 71 percent to 26 percent . . ..”

Id. at 1163-1164.

But Ms. Ingraham herself should also watch out because many of those rural voters are farmers and agriculture is dependent on exports.  Those rural voters could turn against Trump and the Republican party and that is why Republican Senators and Congressmen from rural states are so concerned about Trump’s trade policy.  Farmers want trade agreements, even if Trump and his manufacturing supporters do not.  That is why after listening to the complaints of Republican Senators and Congressmen from agricultural states along with complaints of US Ambassador to China and former Iowa Governor Terry Branstad, Trump told Lighthizer in the NAFTA negotiations to do no harm.

In her book, Laura Ingraham points to Reagan’s history, but misses an important point Reagan lived through the Great Depression and he firmly believed that the protectionist policies in the 1930 Smoot Hawley tariff act, which “protected” the US by increasing tariffs on almost every import, made a depression into the Great Depression.  How do I know?  Because President Ronald Reagan said so.

On June 28, 1986, President Reagan from his ranch in Santa Barbara gave the attache speech, BETTER COPY REAGAN IT SPEECH, on International Trade.  This speech is in effect a point by point rebuttal that Reagan was an economic nationalist.  So I would say to Ms. Ingraham to paraphrase Robert Dole, do not distort Ronald Reagan’s record.  I have quoted the entire speech to show that it came directly from President Reagan and is not a characterization.  As Reagan himself stated in the speech:

My fellow Americans:

This coming week we’ll celebrate the Fourth of July and the birthday of the Statue of Liberty, dedicated one century ago this year. Nancy and I will be in New York Harbor for the event, watching fireworks light the sky over the grand old lady who welcomes so many millions of immigrants to our shores. But I’ve often thought that Lady Liberty also represents another symbol of our openness to the rest of the world. With the ships plying the waters of New York Harbor beneath her, she reminds us of the enormous extent of our trade with other nations of the world.

Now, I know that if I were to ask most of you how you like to spend your Saturdays in the summertime, sitting down for a nice, long discussion of international trade wouldn’t be at the top of the list. But believe me, none of us can or should be bored with this issue. Our nation’s economic health, your well-being and that of your family’s really is at stake.

That’s because international trade is one of those issues that politicians find an unending source of temptation. Like a 5-cent cigar or a chicken in every pot, demanding high tariffs or import restrictions is a familiar bit of flim flammery in American politics. But cliches and demagoguery aside, the truth is these trade restrictions badly hurt economic growth.

 You see, trade barriers and protectionism only put off the inevitable. Sooner or later, economic reality intrudes, and industries protected by the Government face a new and unexpected form of competition. It may be a better product, a more efficient manufacturing technique, or a new foreign or domestic competitor.

By this time, of course, the protected industry is so listless and its competitive instincts so atrophied that it can’t stand up to the competition. And that, my friends, is when the factories shut down and the unemployment lines start. We had an excellent example of this in our own history during the Great Depression. Most of you are too young to remember this, but not long after the stock market crash of 1929, the Congress passed something called the Smoot-Hawley tariff. Many economists believe it was one of the worst blows ever to our economy. By crippling free and fair trade with other nations, it internationalized the Depression. It also helped shut off America’s export market, eliminating many jobs here at home and driving the Depression even deeper.

Well, since World War II, the nations of the world showed they learned at least part of their lesson. They organized the General Agreement on Tariffs and Trade, or GATT, to promote free trade. It hasn’t all been easy going, however. Sometimes foreign governments adopt unfair tariffs or quotas and subsidize their own industries or take other actions that give firms an unfair competitive edge over our own businesses. On those occasions, it’s been very important for the United States to respond effectively, and our administration hasn’t hesitated to act quickly and decisively.

And in September, with more GATT talks coining up once again, it’s going to be very important for the United States to make clear our commitment that unfair foreign competition cannot be allowed to put American workers in businesses at an unfair disadvantage. But I think you all know the inherent danger here. A foreign government raises an unfair barrier; the United States Government is forced to respond. Then the foreign government retaliates; then we respond, and so on. The pattern is exactly the one you see in those pie fights in the old Hollywood comedies: Everything and everybody just gets messier and messier. The difference here is that it’s not funny. It’s tragic. Protectionism becomes destructionism; it costs jobs.

And that’s why I wanted to talk with you today about some legislation that the Congress now has before it that is a throwback to the old protectionist days. It greatly cuts down my flexibility as President to bargain with and pressure foreign governments into reducing trade barriers. While this legislation is still pending before the Senate, it has already passed the House of Representatives. So, the danger is approaching. Should this bill become law, foreign governments would respond, and soon a vicious cycle of trade barriers would be jeopardizing our hard-won economic prosperity. Yes, the politicians are back at it in Washington. And should this unacceptable legislation continue to move through the Congress, I’ll need your help in sending them a message. So, please consider our talk today an early warning signal on free and fair trade, a jobs and growth alert. And stand by, I may need your help in resisting protectionist barriers that would hinder economic growth and cost America jobs.

Until next week, thanks for listening, and God bless you.

Emphasis added.

I too was in the US government during the Reagan Administration, admittedly not a political appointee, but as a line attorney at the US International Trade Commission and the Commerce Department.  I too saw the Reagan trade policy and I do not remember it the way Ingraham and Robert Lighthizer, the current USTR, remember it.  I saw President Ronald Reagan appoint the most free trade Commissioners in its history to the US International Trade Commission—Susan Liebeler and Anne Brunsdale — and they certainly were not economic nationalists.  These free trade ITC Commissioners used to frustrate Robert Lighthizer in cases brought by the US Steel industry because they refused to go affirmative in certain cases and put antidumping and countervailing duty orders in place.

Let me say at the outset, I am not a Libertarian.  I have no problem with trade policy that hammers countries to open markets.  I have no problem with a domestic policy of low taxes and less regulation.  We need to make our companies, farmers and workers more competitive by giving them back the money they have earned.

I also believe that making America great again and putting America’s interests first is a correct policy position.  I am not a globalist, but firmly believe that we first must know what America’s interest is.

But as indicated below, in the post on Trade Adjustment Assistance for Companies, I firmly believe, like Ronald Reagan, who personally approved of the program, that an answer to the trade crisis is not more protectionism, but finding ways to make US companies more competitive.

Like Ronald Reagan, who was a free trader, I do not believe in putting up protectionist trade barriers, which are not temporary and can stay in place for 30 plus years, such as antidumping and countervailing duty orders against steel that wipe out imports and make downstream companies less competitive, is in the interest of the United States.

As President Reagan himself stated, “the protected industry is so listless and its competitive instincts so atrophied that it can’t stand up to the competition,” and competition is what makes and will make America great again.

Like Ronald Reagan I do not believe that protection in the long run saves the industries it is trying to protect.  Robert Lighthizer for decades at Skadden, Arps represented US Steel in the Steel Trade Wars.  My former boss, Mike Stein, represented Bethlehem Steel for decades in the Steel Wars along with Lighthizer, but where is Bethlehem Steel today after 40 years of protection from steel imports—green fields.  Green fields when the steel industry has been protected to some degree for decades from steel imports.

Why?  Despite the protection from steel imports, Bethlehem Steel management and union did not take the protection and adjust to import competition so as to make their production facilities more competitive.  In the 90s, when given protection in a Section 201 case from imports, US Steel bought Marathon Oil.  All the trade protection the US can provide will not save the companies if they want to give their workers exorbitant pensions and their management large bonuses and reduce their own competitiveness in the World market.

Antidumping orders against steel imports have led to a higher US steel price than the World market price.  Steel, however, is a raw material input and the antidumping orders against Steel have led to US antidumping orders brought by injured US industries against imports of ironing tables, folding metal tables and chairs, wind towers, stainless steel sinks, boltless steel shelving, steel nails and a myriad of other products that use US steel as a raw material input.  The disease of the steel industry has spread to the downstream steel using industries.

During the speech Laura Ingraham asked what is the problem with trade protectionism?  One major problem is that trade is a two-way street and what the United States does to one country that country can do back to the United States.  The United States cannot dictate trade policy to the other countries in the World because they are sovereign too.  Also the entire world is moving to an open market, when the US appears to be moving backward to a protectionist US market.  This puts US companies and farmers at a distinct cost disadvantage because it means US exports cannot compete on a level playing field, by Trump’s choice

Lighthizer’s and Trump’s answer to trade problems is simply to put up one more brick and build the protectionist wall higher against imports.  If Ms. Ingraham wants a history lesson, I suggest she look at two countries—recently Japan and less recently China, who followed that same strategy.  In the 1980’s when I was at the ITC and Commerce, the big trade target was Japan.  Having worked in Japan I knew that it had numerous non-tariff trade barriers, which blocked many US exports.  Then in the early 1990s Japan’s economy imploded and it entered into the lost decades in large part because of its own trade policy, which explains why Prime Minister Abe wants the TPP.

China also did exactly what Laura Ingraham is proposing.  China closed down and its economy took a nose dive and went back to the Dark Ages.   It took Deng Xiaoping and later Zhu Rongyi to open up China.  China grew not because of the United States, but because it opened its economy up as it was in China’s economic interest to do so.  Many US companies have joint ventures in China.  When GM was having economic problems in the Obama Administration, the one part of the company it was trying to save was its China operations because the GM Buick was the number one selling car in China.  If the US shuts down, it too like China will go back to the dark ages.

Essentially, Trump appears to be adopting the mercantilist trade policies that he has condemned.  With its focus on trade deficits in manufacturing, Trump’s trade policy appears to be that the only trade deals we want are those where the US has a trade surplus.  That is not the way the World works.

THE TRADE WEAKNESS IN DONALD TRUMP’S ECONOMIC POLICY—THE COSTS OF NOT DOING THE TRADE DEALS

As stated in my last blog post, President Trump dropped the Trans Pacific Partnership (TPP) Agreement, has made noises about dropping the US Korea agreement and is on the verge of killing the North American Free Trade Agreement (“NAFTA”) with Mexico and Canada.

During the time when the TPP was being discussed in Congress, its passage was in trouble because many Senators and Congressmen believe the US did not get enough.  Senator Orin Hatch wanted more on biologics and other Senators and Congressmen wanted a a better deal.

But the big problem at the Trump Presidential and Congressional level with regards to these trade agreements was and is the failure to calculate the cost of not doing these trade agreements or of terminating them.  Keep in mind the only party that is more protectionist than Donald Trump is the Democrats.  Also with Steve Bannon’s attacks on “establishment” Republicans, free traders in the Republican party are becoming few and far between.

The Bannon and Trump approach reveal fatal misunderstandings.  Steve Bannon and Donald Trump have not figured out one important point: Not only do companies compete against each other and States compete against each other, but the United States and other countries compete against each other.  The US decision to go the Protectionist route means it has given up competing and has created an open road for the economic competitors of US, including EC, China, Mexico, Canada, Australia and other countries, who are all moving in to replace US exports in those markets.  Trump’s and Bannon’s policy combined with the Democrat’s protectionist policies mean the US will lose the economic war because of the US failure to compete in the international economic marketplace.

The arrogance of the Steve Bannon and the Trump trade policy is based on the principle that the United States is the largest market in the World, and this gives the US leverage and, therefore, countries must kowtow and bend their head to get into the US market.  Although that principle may have been true twenty years ago, it is simply no longer true.

The Trans Pacific Partnership, for example, combines the markets of 12 countries, now 11 with the US exit, into one “huge” trading block.  Since Mexico, Canada, Japan, Australia and New Zealand are part of that block, the TPP market is a much larger market than the US alone.

Also in many ways, with 1.37 billion people China has a larger market than the US.  In 2006, at a speech in Beijing, the US Commercial Attaché stated that 75% of all Chinese, including rural Chinese, have a color television set.  Now that is close to 95% of 1.37 billion.  That is a larger market than the US with its 323 million.

But it is the costs of terminating the TPP deal, which are becoming much more clear.

As stated in my last newsletter, the ox that will be gored by Trump’s trade policy is agriculture and that is just what is happening.  Mexico and Canada are also in a stronger trade position than the US because they already have free trade agreements with a number of other countries, including the EC, and that gives them a substantial competitive advantage getting into those markets.  This fact gives Canada and Mexico leverage in the NAFTA negotiations even though Trump, Lighthizer and Ross simply do not understand the dynamics of the deal.

In that blog post, I quoted extensively from the attache August 7, 2017 article entitled “Trump’s Trade Pullout Roils Rural America”, Trump’s Trade Pullout Roils Rural America – POLITICO Magazine.  To summarize some of the points in that Politico article:

for the already struggling agricultural sector, the sprawling 12- nation TPP, covering 40 percent of the world’s economy, was a lifeline. It was a chance to erase punishing tariffs that restricted the United States—the onetime “breadbasket of the world”—from selling its meats, grains and dairy products to massive importers of foodstuffs such as Japan and Vietnam.

The decision to pull out of the trade deal has become a double hit on places like Eagle Grove. The promised bump of $10 billion in agricultural output over 15 years, based on estimates by the U.S. International Trade Commission, won’t materialize. But Trump’s decision to withdraw from the pact also cleared the way for rival exporters such as Australia, New Zealand and the European Union to negotiate even lower tariffs with importing nations, creating potentially greater competitive advantages over U.S. exports.

A POLITICO analysis found that the 11 other TPP countries are now involved in a whopping 27 separate trade negotiations with each other, other major trading powers in the region like China and massive blocs like the EU. Those efforts range from exploratory conversations to deals already signed and awaiting ratification. Seven of the most significant deals for U.S. farmers were either launched or concluded in the five months since the United States withdrew from the TPP.. . .

In other words, the entire World is moving in the direction of President Ronald Reagan to a more open free trading market, which would have benefitted US companies greatly.  The US is following Trump’s trade policy and moving backward to a more closed protectionist market.

The article went on to state the numerous free trade agreements being negotiated by the other countries in the TPP and now those Agreements are putting US farmers at a distinct disadvantage.  EC pork farmers, which already exports as much pork to Japan as the United States does, have an advantage of up to $2 per pound over U.S. exporters. European wine producers, who sold more than $1 billion to Japan between 2014 and 2016, have a 15 percent tariff advantage over U.S. exporters.

When Donald Trump pulled out of the TPP, Japan turned around and offered the same deal to the EC, which the United States had spent two excruciating years extracting from Japanese trade officials.  The United States is now left out.

Four Latin-American countries—Mexico, Peru, Chile and Colombia, known as the Pacific Alliance are opening negotiations with New Zealand, Australia and Singapore.

Australia is selling beef at a lower price than the US to Japan.  Without the TPP, Australian ranchers eventually will enjoy a 19 percent tariff advantage over U.S. competitors.

With the TPP, economic forecasts already show projected gains for countries involved. Canada, according to one estimate, could permanently gain an annual market share of $412 million in beef and $111 million in pork sales to Japan by 2035, because lower tariffs would enable it to eclipse America’s position in the market.

Over the first five months of 2017, U.S. exports to Japan of chilled pork, which is preferable to frozen meat, are up 2 percent over the previous year. But exports of chilled pork from Canada, a prime competitor, are up 19 percent. Likewise, in frozen pork, U.S. exports are up 28 percent. But exports from the EU, the leading competitor, are up 44 percent.

Now there are more indicators that Canada, Mexico and Japan are turning away from US imports because of the Trump protectionist positions.

COSTS OF PULLNG OUT OF NAFTA AND TPP

CANADA

In an October 16, 2017 article in the Globe and Mail, “Canada must prepare for life after NAFTA” former Canadian trade negotiator Gordon Ritchie stated:

“The Canadian government (as well as the provinces, business and labour) is now forced to contemplate life without a free-trade agreement.  While this is far from a preferred choice, it would not be the end of the world. In the absence of a bilateral agreement, the most-favored-nation rules of the World Trade Organization would apply and offer many of the same protections. Tariffs would be restored, but at a much lower level than before the free-trade agreement, averaging roughly 3.5 per cent on shipments to the United States. Unquestionably, existing economic linkages would be put under stress but most would survive. This is clearly not the option the Canadian government would prefer but it could be better than what is currently on offer from the Trump administration.

Meanwhile, the impact on U.S. businesses would be just as severe if not more so. In an unprecedented statement, the U.S. chamber of commerce, the broadest and perhaps most influential business lobby, came out strongly against dismantling NAFTA, which it earlier estimated underpinned about 12 million American jobs.”

MEXICO

On October 16, 2017 in an article entitled “Mexico Braces for the Possible Collapse of Nafta”, the New York Time reported:

“Mexico is steeling itself for the increasing possibility that the United States will pull out of the North American Free Trade Agreement, envisioning how the Mexican economy would adapt without the deal that has guided relations between the neighbors for a quarter-century. .  .

President Enrique Peña Nieto recently traveled to China to discuss trade, among other issues; Mexico is a member of the Trans-Pacific Partnership trade accord.

Already new suppliers are emerging. In December, Argentina is expected to deliver 30,000 tons of wheat, its first sale ever to Mexico. Crisp Chilean apples have begun to appear on Mexico’s supermarket shelves, next to piles of apples from Washington State. . . .

Still, the question is what a post-Nafta economy would look like. The Mexican government’s view is that the United States market would remain largely open.

Without Nafta, American duties on Mexican goods would revert to levels set by the World Trade Organization.

The figures vary, although the average is estimated to be about 3 percent for manufactured products. Cars assembled in Mexico, for example, would pay a duty of 2.5 percent.

“Do we like those duties? No. Can we live with them? Yes,” said Luis de la Calle, a former trade negotiator for Mexico. “The integration of Mexico, the United States and Canada will continue regardless of the governments. . . .

If tariffs rise, one possible effect could be that companies move more production from the United States to Mexico to reduce the number of parts requiring duty payments.

The other risk is that companies move production to Asia, buying parts there instead of in North America, and paying a single duty when the finished product enters the United States.

Ford Motor Company set the example this year. In January, it scrapped plans to build a factory in Mexico to produce the Focus, a small passenger car, a decision that won praise from Mr. Trump. But in June, the company announced that it would build a new Focus factory in China instead. . . .”

JAPAN

Despite Japanese noises of a bilateral trade agreement with the US after meetings with Vice President Pence, on October 15, 2017 in the attached article entitled “Japan exasperated by Trump’s trade policies”, Japan exasperated by Trump’s trade policies – POLITICO, Politico reported:

“As U.S. farmers suffer under high tariffs, Japanese officials are in no rush to cut a new trade deal with the United States.

TOKYO — Japanese officials are expressing growing frustration with the Trump administration’s economic policies, vowing to continue striking trade deals with other countries that undercut U.S. agricultural exports rather than seek a new trade agreement with the United States.

The frustration comes both from President Donald Trump’s harsh rhetoric on trade and from his pullout from the 12-nation Trans-Pacific Partnership, which Japan still hopes can provide a bulwark against China’s growing influence in the Asia-Pacific region.

Meanwhile, there is growing evidence that the failure of the TPP is taking a sharp toll on rural America. In August, the volume of U.S. sales of pork to Japan dropped by 9 percent year over year, a serious blow to farmers who had been preparing for a big increase in sales because of lower tariffs in the TPP.

Instead, other countries that export meats, grains and fruits have seized on their advantage over American growers and producers in the wake of the U.S. pullout from the TPP. And a new Reuters poll shows Trump’s favorability in rural America — once a great stronghold — dropped from 55 percent last winter to 47 percent in September. The poll also showed a plunge in support for Trump’s trade agenda among rural voters. . . .

in interviews with POLITICO, more than half a dozen senior Japanese officials said they were uneasy with a so-called bilateral — two-nation — deal to replace the TPP, arguing that the goal of the multinational agreement was to create a wide international playing field. They said they are dismayed by Trump’s seeming inability to understand the importance of a multinational pact to establish U.S. leadership in the region and set the trade rules for nations on both sides of the Pacific Ocean as a counterweight to China’s rising influence.

“Our prime minister has made it quite clear that we respect the U.S. decision. … That is our official position, but I think withdrawal from TPP is very wrong,” said one senior official. “Honestly, it has diminished many of things that the U.S. has achieved in the region.”

In response, Japan has continued negotiating with American trade competitors, striking a political deal on a landmark free-trade agreement with the European Union in July while continuing to work toward closing a deal with the 11 remaining members of the TPP. In interviews, the senior Japanese officials made clear their ultimate goal is to persuade the United States to rejoin the TPP.

“In the conduct of our affairs with the United States, we need to have leverage,” said one former senior Japanese Cabinet official. “In order for us to convince the U.S., we need to have our own leverage, and our own leverage needs to be free-trade agreements [with U.S. competitors].”

There are some signs the Japanese strategy is working. Republicans in Congress, many of whom were TPP supporters, are expressing impatience with the administration and a conviction that U.S. agricultural industries are suffering because of tensions unleashed by the TPP pullout.

“We cannot allow much more time to lapse in creating opportunities to have other agreements, and especially when you look at Japan,” said Rep. Dave Reichert of Washington state, chairman of the House Ways and Means Trade Subcommittee, as his panel wrapped up a hearing last week on trade opportunities in the Asia Pacific region.

Trump himself has shown no sign of second- guessing his pullout from the TPP, which he described in an interview with Forbes magazine this month as “a great honor.”

“I consider that a great accomplishment, stopping that. And there are many people that agree with me,” he said. “I like bilateral deals.” .  . . .

Perdue’s comments came amid growing frustration in the farm belt. U.S. producers expect to continue losing market share in meat exports to other countries, even as domestic production reaches an all-time high, until something is done to address high import tariffs on the other side of the Pacific. Japan remains the top market for U.S. beef, and exports are up 22 percent from a year ago, but the impact of a recent hike in tariffs on frozen beef from 38.5 percent to 50 percent — a move that would have been avoidable if the TPP had been in force — will soon be felt, the U.S. Meat Export Federation predicts. The volume of pork exports of pork to Japan, the leading market for the U.S. in terms of value, dropped by 9 percent in August year over year. . . .

But Japan is in no rush to do so, according to the interviews with senior Japanese officials, who suggested that their country’s frustrations with the Trump administration are vast. . . .

For the ever-powerful career officials who sit in the unadorned buildings lining the leafy streets of Tokyo’s government district, there is one concern about the U.S. president that overrides all others: Trump’s determination to measure the effectiveness of trade deals in terms of which side sells more to the other.

Indeed, there are many people in the United States who share the view that free trade grows the global pie, with competition serving to promote efficiency and let countries take advantage of their own assets — such as the vast farming sector in the center of the United States, which has no parallel in Japan. . . .

Trump’s view, backed up by “American first” rhetoric, presumes that countries are inherently competitors, and that there are clear winners and losers.

“We want to avoid the relationship turning into a zero-sum game,” said a senior Japanese official.

“Each country has its own policy objectives, but Japan does not see trade deficits or surplus as the only driving force for trade negotiations,” said another senior government official. “A rules-based system is very important.”

Thus, Japanese officials are watching closely as the Trump administration renegotiates the North American Free Trade Agreement through ongoing talks with Canada and Mexico. To support its America- first agenda, the administration is threatening to blow up the 23-year-old trade deal and unravel complex supply chains that have grown over the life of the pact.

“They’re watching NAFTA and, frankly, in East Asia, they’re saying if the United States is so stupid as to screw up its agreements with its continental powers in Canada and Mexico, what can we in East Asia expect from these guys?” said Robert Zoellick, who served as President George W. Bush’s chief trade negotiator and later as World Bank president. “That’s a realistic question.” . . .

The failure of the TPP is a subject of contention between the two men — because Japan not only risked its economic future in hopes of a multinational trade deal but also pinned much of its national security hopes on the deal.

The need to counter the growing clout of China is an all-consuming priority in Tokyo, and Japanese officials felt that with the TPP they were on the verge of a genuine breakthrough, tying the United States, Canada, Vietnam, Mexico, Chile and other large nations on both sides of the Pacific into an economic alliance greater than anything China could muster. . . .

Seeking to fill the void left by the TPP, China has accelerated the pursuit of its own mega-deal with other Asian nations, called the Regional Comprehensive Economic Partnership, or RCEP.

The United States leaving TPP “created a vacuum in the region, that’s for sure,” the official said. “It’s why RCEP is gaining momentum. That is why the government is asking the U.S. to come back to the TPP. We keep continuing to say so.” . . .

“The Japanese government has no mind of going back to the table for a bilateral negotiation,” said another senior official. “TPP was risky for Abe; a bilateral will require an even bigger leap.”

AGRICULTURE

On September 11, 2017 in article in Bloomberg entitled, “Four Ways to Rebuild Consensus on Agricultural Trade, The U.S. is losing ground fast to global rivals in Asia”, two former US Senators Max Baucus and Richard Lugar stated that they had formed a new group, Farmers for Free Trade stating:

“The financial health of American farmers depends on trade. In what remains the “breadbasket of the world,” U.S. farmers export half of all major commodities they grow, contributing to a projected trade surplus of $20 billion this year alone and supporting millions of direct and indirect jobs. At a time when American farm incomes have been rapidly declining, trade is what’s helping to keep farmers, ranchers and many rural communities afloat.

Not so long ago, we served in Washington D.C. when these realities were well understood. It was a time when bipartisan support for opening new markets to our farmers was assumed and expected. As globalization took hold, we understood that trade agreements were our only tool to ensure that American wheat, soy or beef could out-compete other countries’ products vying for the same markets. It was a consensus that delivered for millions of American farmers. Today, that consensus has faded.

American agricultural trade is facing risks not seen in a generation. Public attitudes toward trade agreements have shifted as protectionist sentiment has grown. Threats of tariffs on U.S. trading partners invite the specter of retaliation. Meanwhile, our competitors plot to assume the mantle of global supplier the U.S. has long occupied.

We need to rebuild consensus on agriculture trade. It must be one that incorporates the position of American farmers; that reflects the needs of rural communities; that is echoed by state and local leaders, and that seeks to heal the deep fissures on trade in Washington D.C.

We believe that consensus can be built around four important steps.

First, we need to get off the sidelines and get back in the business of negotiating trade agreements. The U.S. currently does not have a single ongoing trade negotiation that gives our farmers access to the rapidly growing Asian market. Our absence in Asia means that China is quickly moving into the void with its own trade deals that outflank U.S. agricultural producers. One of those China-led deals, the Regional Comprehensive Economic Partnership, involves 15 other Asia-Pacific countries with growing middle classes, many of whom are clamoring for the agricultural bounty the U.S. once supplied.

Meanwhile, agriculture powerhouses like Canada, New Zealand and Australia are cutting bilateral deals that provide preferential treatment for their commodities.

Take the example of beef. According to the National Cattlemen’s Beef Association, as of this week, the U.S. has now lost out to Australia on more than $165 million in beef sales to Japan. That happened because Australia cut a trade deal with Japan in 2015, and we recently walked away from one.

These sharp competitive disadvantages are becoming the norm, and while it’s difficult to calculate all the untapped gains the U.S. has lost, the numbers are clear on how we reverse the trend. Since 2003, U.S. agricultural exports to countries we do have trade agreements with increased more than 136 percent.

Second, we need to remove the threat of retaliation against U.S. agriculture. Our trading partners are not novices when it comes to whom and what they retaliate against when the U.S. runs afoul of our international commitments. U.S. farmers are always target number one.

That is because our trading partners know it is the economic engine for so many states, and because the pain inflicted is immediate and acute.

For example, the last time Mexico retaliated against the U.S., their targets included everything from corn, to apples, to almonds and grapes. The Department of Agriculture estimated that those measures cost U.S. growers close to $1 billion in lost sales.

We know there are onerous trade practices that must be addressed through diplomacy and other mechanisms for setting disputes. But threatening our closest trading partners with blanket tariffs, border taxes or aggressive enforcement actions risks a trade war that would have no winners.

Third, we need to modernize NAFTA in a way doesn’t erode the enormous gains it has delivered for American farmers and ranchers. That means working to eliminate any remaining tariff and non-tariff barriers, simplifying packaging and labeling requirements, and improving agriculture opportunities through e-commerce platforms.

But it also means doing no harm to a pact that — according to the Farm Bureau — has resulted in an annual jump of agriculture exports from $8.9 billion in 1993 to $38 billion last year.

The Trump administration has a real opportunity to expand on those gains. They should do it quickly and thoughtfully so we can turn to the task of keeping pace with our competitors.

Finally, to rebuild consensus on trade, we need to organize and educate. We know there are officials in the administration and in Congress who understand the value of agricultural trade. Yet, recent trade debates have too often become a microcosm of our broader partisan politics.

To support this effort, we’re launching a bipartisan, not-for-profit organization called Farmers for Free Trade, to build a coalition of farmers, mayors and community leaders in congressional districts across the country. This isn’t only about the over 1 million U.S. jobs supported by agriculture trade, but also the secondary and tertiary jobs it creates in rural communities: from growers, harvesters, processors, and packagers to grain elevator operators, railroad workers, truck drivers and port operators.

Rebuilding consensus on trade begins in the heartland and capitalizes on the great strength of American farmers and ranchers. If we can do that, America wins.”

U.S. ANTI-TRADE STANCE AIDS EU

Meanwhile who benefits from the US decision to turn toward protectionism, other countries and the EU.  Jyrki Katainen, the European Commission’s vice president for jobs, growth, investment and competitiveness recently stated:

“We are willing to negotiate with third countries all the time – it’s part of our economic strategy. And now we have seen that many countries have been concerned about rising protectionism and entities which undermine the multilateral system, so they have been contacting us.”

The Wall Street Journal article below outlines the negative impact of terminating NAFTA on the US automobile industry.

US CHAMBER OF COMMERCE

Instead of listening to the protectionist steel industry and the unions, maybe it is time for the Trump Administration to listen to the winners in the Trade World.  On October 10, 2017, in Mexico City, U.S. Chamber of Commerce President Tom Donohue spoke out against the Trump administration’s approach to negotiating the North American Free Trade Agreement, which he said has been riddled with “unnecessary and unacceptable” poison pill proposals from the U.S. side.  As Donohue stated:

“All of these proposals are unnecessary and unacceptable.  They have been met with strong opposition from the business and agricultural communities, congressional trade leaders, the Canadian and Mexican governments, and even other U.S. agencies. Ladies and gentlemen, we’ve reached a critical moment, and the Chamber has had no choice but ring the alarm bells.

“[NAFTA withdrawal] would abruptly slam the door on future negotiations because those governments have made it very clear they won’t negotiate with a gun to their head.  The United States could then reasonably expect trade retaliation … higher tariffs … broken supply chains … and potentially less cooperation on other priorities like anti-terrorism and anti-narcotics efforts.”

Donohue specifically criticized the foolish reliance on the need for the agreement to reduce the U.S. trade deficit:

“The business community, along with any economist worth his or her salt, has repeatedly explained that the trade balance is not only the wrong way to measure who’s ‘winning’ on trade, it’s the wrong focus, and is impossible to achieve without crippling the economy.”

NAFTA NEGOTIATIONS HAVE STALLED

On August 16th, United States, Canada and Mexico sat down together for the first round of talks to formally reopen NAFTA.  On July 17th, the USTR released its attached “Summary of Objectives for the NAFTA Renegotiation”, USTR NAFTA RENGOTIATION OBJECTIVES:

On October 18th, Politico reported that the NAFTA negotiations are at a standstill as Canada and Mexico have rejected the strident US proposals and potentially insurmountable disagreements on areas ranging from auto rules of origin to dairy market access and a sunset provision. The next round is to start on November 17th in Mexico.

At the closing press conference, the Canadian and Mexican trade ministers attacked the United States for making impractical demands and an overall unwillingness to compromise.

US Robert Lighthizer responded:

“Frankly, I am surprised and disappointed by the resistance to change from our negotiating partners. As difficult as this has been, we have seen no indication that our partners are willing to make any changes that will result in a rebalancing and a reduction in these huge trade deficits.

We have seen no indication that our partners are willing to accept any change that will result in a rebalacing and a reduction in these huge trade deficits.  Now I understand that after many years of one-sided benefits, their companies have become reliant on special preferences and not just comparative advantage. Countries are reluctant to give up unfair advantages.”

In a press briefing in his private conference room, Lighthizer later stated that his primary goal is to reduce the trade deficit and:

“take away what I consider to be in many cases artificial incentives to encourage investment overseas that are not market based. If we get that right, we’ll have an agreement that the president will be enthused about and at that point if the president is enthused, I think the Congress will be enthused.”

Lighthizer has also argued that NAFTA is just frosting on the cake for major corporations:

“I think it’s possible to take a little of the sugar away and have them say, ‘Yeah we’re still doing pretty well.  I understand that everybody that’s making money likes the rules the way that they are. That’s how it works and they can make a little less money or make more money in a different way and we can get the trade deficit down and we can also have what I consider at least in the investment realm to be a market-based investment decision. I think if we do that business will be fine, and if we do that labor will come along and say this is a step in the right direction and it’s worth changing the paradigm in doing that.”

On October 16, 2017, in an article entitled Trump’s NAFTA Threat”, the Wall Street Journal made the opposing argument.

“Donald Trump is threatening again to terminate the North American Free Trade Agreement if Canada and Mexico don’t agree to his ultimatums.

If this is a negotiating tactic of making extreme demands only to settle for much less and claim victory, maybe it will work. Otherwise Mr. Trump is playing a game of chicken he is playing a game of chicken that he can’t win

Mr. Trump’s obsession with undoing Nafta threatens the economy he has so far managed rather well. The roaring stock market, rising GDP and tight job market are signs that deregulation and the promise of tax reform are restoring business and consumer confidence. Blowing up Nafta would blowup all that too. It could be the worst economic mistake by a U.S. President since Richard Nixon trashed Bretton-Woods and imposed wage and price controls.

U.S. demands in the Nafta renegotiations­ which returned to Washington last week-are growing more bizarre. U.S. Trade Representative Robert Lighthizer now wants to add a sunset clause, which would automatically kill it in five years unless all three governments agree to keep it. In other words, the U.S. proposes to increase economic uncertainty and raise the incentive for businesses to deploy capital to more reliable investment climates.

The U.S. also wants to change Nafta’s “rules of origin” for autos. Cars now made in North America can cross all three borders duty-free if 62.5% of their content is Nafta-made. Mr. Lighthizer wants to raise that to 85% and add a sub­ clause requiring 50% be made in the U.S.

Mr. Lighthizer needs to get out more. Nafta’s current rules-of-origin for autos are already the highest of any trade agreement in the world, says John Murphy of the U.S. Chamber of Commerce. Raising them would give car makers an incentive to source components from Asia and pay America’s low 2.5% most -favored-nation tariff. A higher-content rule would hurt Mexico, but it won’t bring jobs to the U.S

It’s hard to overstate the damage that ending Nafta would inflict on the U.S. auto industry. Under Nafta, companies tap the comparative advantages of all three markets and have created an intricate web of supply chains to maximize returns. As Charles Uthus at the American Automotive Policy Council said last week, Nafta “brings scale, it brings competitiveness, it brings efficiencies [and] synergies between all three countries, and it brings duty-free trade.” Its demise would be “basically a $10 billion tax on the auto industry in America.”

Last week the Boston Consulting Group also released a study sponsored by the Motor & Equipment Manufacturers Association that found ending Nafta could mean the loss of 50,000 American jobs in the auto-parts industry as Mexico and Canada revert to pre­ Nafta tariffs.

Mexico has elections next year and no party that bows to unreasonable demands by Mr. Trump can win. The Mexican political class appears willing to call his bluff, which is making American business very nervous. More than 300 state and local chambers of commerce signed an Oct. 10 letter to Mr. Trump imploring him to “first ‘do no harm’ in the Nafta negotiations.”

It noted that 14 million American jobs rely on North American daily trade of more than $3.3 billion. “The U.S. last year recorded a trade surplus _o f $11.9 billion with its NAFTA partners when manufactured goods and services are combined,” the letter said. “Among the biggest beneficiaries of this commerce are America’s small and medium-sized businesses, 125,000 of which sell their goods and services to Mexico and Canada.”

Ending Nafta would be even more painful for U.S. agriculture, whose exports to Canada and Mexico have quadrupled under Nafta to $38 billion in 2016. Reverting to Mexico’s pre-Nafta tariff schedule, duties would rise to 75% on American chicken and high-fructose corn syrup; 45% on turkey, potatoes and various dairy products; and 15% on wheat. Mexico doesn’t have to buy American, and last week it made its first wheat purchase from Argentina-30,000 tons for December delivery.

Canada and Mexico know that ending Nafta will hurt them, but reverting to pre-Nafta tariff levels could hurt the U.S. more. Mr. Trump can hurt our neighbors if he wants, but the biggest victims will be Mr. Trump’s voters.”

On October 16, 2017, in an article entitled “Trump Trying To Destroy NAFTA with Pin Pricks Instead Of A Sledgehammer” John Brinkley at Forbes outlined the US demands in the NAFTA negotiations and why they are being rejected:

“It appears increasingly likely that NAFTA is headed for the trash heap. People involved in the re-negotiation of the 23-year-old trade pact are pessimistic about its chances for survival, because the Trump administration seems bent on causing its death by 1,000 cuts.

An inexplicable aspect of this is that there is no constituency in the United States for NAFTA’s termination.

Not even the most fervent NAFTA-haters — e.g., the AFL-CIO, the Sierra Club, Public Citizen’s Global Trade Watch, and Democratic House members from Rust Belt states — have demanded the death of NAFTA. Businesses large and small, farmers and ranchers, mayors of most American cities and most members of Congress want NAFTA to stay in force. No one of note has said NAFTA has to go. So, whose interests is President Trump trying to protect?

It’s clear that what he would like to do is simply withdraw from the agreement, which he can easily do by providing Canada and Mexico six months’ notice in writing. But instead, his negotiators have tabled several proposals – poison pills would be a more apt description – that they know the Canadians and Mexicans won’t accept. This will allow Trump to blame them for NAFTA’s demise.

“Issues are being put on the table that are practically absurd,” former Mexican   Jaime Serra told Reuters during the fourth round of talks, which ended Sunday. “I don’t know if these are poison pills, or whether it’s a negotiating position or whether they really believe they’re putting forward sensible things.”

Here are four of them:

A sunset provision that would automatically terminate NAFTA after five years unless all three countries vote to keep it in force.

Deletion of NAFTA Chapter 19, which allows parties to defend themselves against dumping and illegal subsidies by one another.

A so-called opt-in provision to NAFTA’s investor-state dispute settlement (ISDS) chapter.

A change to automotive rules of origin that would make it more difficult for Canada and Mexico to export cars to the United States.

Let’s look briefly at each of these.

A five-year sunset clause would add so much uncertainty to NAFTA’s future that businesses in all three countries would be reluctant to plan and invest with regard to cross-border trade. It would also trigger a renegotiation of NAFTA every five years.

Scrapping Chapter 19 would end 23 years of fairness and equality in the way the three NAFTA parties pursue anti-dumping and illegal subsidy cases. Conservative opponents of Chapter 19 say it impinges on U.S. sovereignty by requiring the government to adhere to a supranational system. That is an argument based on principle. It has no practical merit.

ISDS allows a private company operating in a foreign country to challenge an action by that country’s government that hurts the company. Allowing one country to opt in or out of ISDS would be like allowing a driver who is pulled over for speeding to opt out of having to obey the law against speeding – sorry, officer, I have my own speed limit and it’s higher than yours.

NAFTA requires that 62.5% of the content of NAFTA-built cars and light trucks originate in the U.S. if those vehicles are to be exported duty-free to the U.S. The Trump administration wants to raise that to 80%. This is a purely protectionist measure that would raise the price of cars sold in the United States, including those made here.

The governments of Mexico and Canada vehemently oppose these proposals and others the administration has presented. But Trump has said, no problem, if the NAFTA renegotiations don’t work out, he’s willing to negotiate separate bilateral free trade agreements with the two countries.

It’s apparent that what he really wants is to get rid of Mexico. He has said most illegal Mexican immigrants were rapists and murderers, vowed to build a wall along the Mexican border, threatened to invade the country to rid it of some unspecified “bad hombres,” and threatened to impose a 20% border tax.

And we’re to believe that he wants to sit down with the Mexican government and negotiate a free trade agreement in good faith?

Yeah, right.”

TRUMP THREATS ARE NOT WORKING WITH THE US SOUTH KOREA TRADE AGREEMENT

Meanwhile, South Korean Trade Minister Kim Hyun-chong recently indicated that Seoul is willing to let President Donald Trump kill the pact, rather than bow to unreasonable U.S. demands for concessions to bring bilateral trade more into balance.

Kim also stated that cutting trade ties with South Korea will only push the country, as a matter of necessity, economically closer to China, the source said.

US ANTIDUMPING AND COUNTERVAILING DUTY CASES BECOME MORE POLITICAL

Recently there has been a distinct difference in the antidumping and countervailing duty area.  Friends have told me that internally at Commerce all countervailing duty and antidumping duty determinations go to the Secretary’s office of his personal review.  That was not true when I was at the Commerce Department during the Reagan Administration.

Countervailing duty and antidumping determinations are legal proceedings that are subject to Court review.  The Court of International Trade and the Court of Appeals for the Federal Circuit can overturn as not based on substantial evidence on the record if there is not a factual underpinning for the Commerce Department decisions.

If politics become a large part of the case, that is a reason for the Court to overturn Commerce decisions as arbitrary and capricious and not based on substantial evidence on the record.

Every time Commerce issues a determination in an antidumping and countervailing duty case, Commerce Secretary Wilbur Ross makes a personal statement.  When the Countervailing Duty preliminary determination of 212% in the Bombardier Civil Aircraft case was issued, Secretary Ross stated:

“The U.S. values its relationships with Canada, but even our closest allies must play by the rules.  The subsidization of goods by foreign governments is something that the Trump Administration takes very seriously, and we will continue to evaluate and verify the accuracy of this preliminary determination.”

In past newsletters, I have argued that Commerce is a hanging judge in AD and CVD determinations finding dumping and subsidization in close to 100 percent of the cases.  But in contrast to a China case, where Commerce uses fake numbers, in a market economy case against Canada, for example, Commerce is to use actual domestic prices and costs to determine dumping and actual government payments to determine subsidization in the case and actual commercial values in that country to value them.  Thus, in counseling foreign companies in antidumping and countervailing duty cases, if they are in market economy countries, I tell them that they can use computer programs to run their numbers and make sure that they are not dumping.  Also companies can usually figure out whether they have taken subsidies from the Government.

As indicated in the Article about the Bombardier/Civil Aircraft case below, however, although the AD and CVD rates were very high at 219% and 79%, Commerce did give reasoned decisions as to how it calculated those high rates.

NO SYMPATHY FOR BOMBARDIER IN BOEING FIGHT.

Just before the countervailing duty preliminary determination in the Civil Aircraft from Canada case, I was interviewed by BBC radio and by various investment companies asking me for my views on the case.  During those interviews, I emphasized that the US countervailing duty and antidumping cases against Canada were legal proceedings and that the Commerce Department’s preliminary determinations were normal operating procedure pursuant to the US antidumping (“AD”) and countervailing duty (“CVD”) law.  The Commerce Department must follow the statutory requirements of the AD and CVD law, and these preliminary determinations were not political decisions.  They were legal decisions made pursuant to the law and the statutory deadlines in those laws.

With all the political arguments from both the Canadian and UK Governments in the wind, during those interviews, however, I also suggested the case could result in a negotiated suspension government to government agreement, much like happened in the Canadian Lumber case.  After the CVD preliminary determination, USTR Lighthizer also mentioned the possibility of a government to government negotiated deal in the Bombardier case.

But then Commerce issued a preliminary CVD rate of 219.63%.  Immediately the Canadian government complained about the unfairness of the decision, and the UK government threatened a trade war with the US because Bombardier has a production plant in Northern Ireland.

Commerce issued the very high CVD rate as indicated in the attached Commerce Department’s Issue and Decision Memo, 2017.09.26 Aircraft Prelim I&D Memo, because of the massive equity infusion of $1 billion by the Quebec Government directly into Bombardier, making it in effect a state-owned company, much like the Chinese state-owned companies.

The entire purpose of the US CVD law and CVD laws in general is that private companies should not have to compete in commercial markets against the Government and that is just what has happened.

Although the argument is made that Boeing is financed by its military sale of airplanes to the US government, Boeing itself is a publicly traded company on the New York stock exchange and certainly has not received $1 billion in a direct equity infusion into the company by a Government to finance its production operations.

But then Bombardier seriously damaged its own chances for a negotiated government to government suspension agreement because Commerce issued an antidumping preliminary determination of 79.82% antidumping rate based on All Facts Available (“AFA”) because Bombardier refused to provide sales information regarding its contracts with Delta and Air Canada and cost information.

Essentially an AFA rate is a penalty for a respondent refusing to cooperate in the Commerce Department’s investigation.  The Canadian Government would have reached an identical decision in the Antidumping Case if a a respondent refused to provide requested information in its questionnaire response.  The EC takes the same position. If a respondent refuses to cooperate in EC antidumping and countervailing duty cases, the EC will use all facts available.

I firmly believe that because of the decision not to cooperate with Commerce, the Trump Administration will refuse to do a suspension agreement in this case.  Commerce will not reward bad behavior in AD cases.  A company cannot refuse to cooperate with Commerce and give them the information they need to make a decision and then expect Commerce to give it a political deal.

Also the UK threat of a trade war indicates an ignorance of how AD and CVD law works, which is understandable because all AD and CVD cases in the EC are handled in Brussels.  As stated above, these preliminary determinations were legal determinations under the US AD and CVD law, which are based on the WTO Antidumping and Countervailing Duty Agreements and agreed to by all countries in the WTO, including Canada, the EC and through the EC, the UK.

Bombardier argued that it could not provide the sales information because the airplanes had not been exported to the US.  As indicated in the attached AFA memo, ANTIDUMPING AFA BOMBARDIER, the US Antidumping Law, which is based on the WTO Antidumping Agreement, covers “sales” and in the absence of sales offers for sale.  As the AFA Memo states:

Additionally, section 772 of the Act defines export price and constructed export price as the price at which merchandise under consideration is first sold or agreed to be sold. Moreover, 773(a)(1)(B) of the Act states that normal value is the price at which:

the foreign like product is first sold (or, in the absence of a sale, offered for sale) for consumption in the exporting country, in the usual commercial quantities and in the ordinary course of trade and, to the extent practicable, at the same level of trade as the export price or constructed export price.

In addition, as previously mentioned, under 19 CFR 351.102(b)(43), the term “sale” includes a contract to sell. Furthermore, a Ways and Means Committee report describes the reason for amending the countervailing duty law, along the lines of what already existed in the antidumping duty law, to make clear that the Department could initiate countervailing duty cases and render determinations in situations where actual importation had not yet occurred but a sale for importation had been completed or was imminent. The House Report explained that “{a}ntidumping law has, since its inception, applied not only to imports, but to sales or likely sales. This report additionally explained that the amendment (including the phrase “or sold (or likely to be sold) for importation” in section 701(a) of the Act) was “particularly important in cases involving large capital equipment, where loss of a single sale can cause immediate economic harm and where it may be impossible to offer meaningful relief if the investigation is not initiated until after importation takes place.” This logic described in the House Report is relevant in this antidumping duty investigation as well. For these reasons, the Department appropriately requested information related to Bombardier’s purchase contracts for merchandise under investigation in the United States and the home market.

According to Commerce, Bombardier only submitted arguments in response to sections B through D of the questionnaire.  It did not provide the facts to support those arguments.  Under US AD law, however, Commerce Department decisions and respondent’s arguments have to be based on the facts on the Administrative Record.  When there are no facts, Commerce will use All Facts Available.

Through intermediaries, I have been told that Bombardier refused to release that information to Commerce because of fear it would be released to Boeing.  If that is true, it reveals the failure of Bombardier’s outside lawyers to discuss how Commerce Department Administrative Protective Orders work in AD and CVD cases.  Under US AD and CVD law, only outside counsel, not Boeing’s inside counsel, are granted access to Bombardier information and if those outside lawyers reveal that information to Boeing, they can be disbarred.  Trade counsel in the US take very seriously the APO requirements under the US AD and CVD Law.  In addition, Bombardier’s outside counsel has had access to Boeing’s confidential information under Administrative Protective at the US International Trade Commission so there is simply no sympathy for Bombardier’s arguments.

Finally, the latest news is that Bombardier is asking Airbus to take a majority share in its production of C Series Aircraft and Airbus will shift the production to Mobile, Alabama to get out of the case.  Boeing has argued that Boeing’s move will not have an effect on the case because any orders issued will cover parts.

But that is not quite correct.  The jurisdiction in AD and CVD cases is in rem over the things, products, being imported into the US.  So the critical issue is how did Boeing describe the products to be covered by the case and that are in the Scope of the Merchandise Section in the Federal Register notice issued by the Commerce Department.

The Scope of the Merchandise Section in the Federal Register notice states that the AD and CVD orders will cover imports of:

“aircraft, regardless of seating configuration, that have a standard 100- to 150-seat two-class seating capacity and a minimum 2,900 nautical mile range, as these terms are defined below. . . .

The scope includes all aircraft covered by the description above, regardless of whether they enter the United States fully or partially assembled, and regardless of whether, at the time of entry into the United States, they are approved for use by the FAA.”

The scope does not include “parts thereof” language so the real question is whether Customs will consider any parts imported into the United States to be “partially assembled” civil aircraft.

The key point is that the desperate measure to joint venture with Airbus, however, means Bombardier has given up on a government to government Suspension Agreement to settle the case.  I suspect Bombardier will have major problems going forward.

SECTION 201 SOLAR CELLS CASE

On May 17, 2017, Suniva filed a Section 201 Escape Clause against all Solar Cell imports from all countries at the US International Trade Commission (“ITC”).  On May 23, 2017, in the attached Federal Register notice, ITC iNITIATION NOTICE SOLAR CELLS, the ITC decided to go ahead and institute the case.

The ITC had to determine whether “crystalline silicon photovoltaic (“CSPV”) cells (whether or not partially or fully assembled into other products) are being imported into the United States in such increased quantities as to be a substantial cause of serious injury, or the threat thereof, to the domestic industry producing an article like or directly competitive with the imported articles.”

The ITC reached an affirmative injury determination in the case on September 22, 2017, and now it has entered a remedy phase on which remedy to recommend to the President.

The Commission will issue its report to the President on November 13, 2017 and the President within 60 days must decide whether or not to impose import relief, which can be in the form of increased tariffs, quotas or an orderly marketing agreements.

Although the ITC remedy phase is important, the real remedy will be determined by President Donald Trump with the assistance of the USTR after November 13th.

On October 3, 2017, the ITC held a hearing in the remedy phase.  The proposed remedies from the parties are:

The petitioners, Suniva and SolarWorld Americas, in their public briefs, proposed two remedies: a tariff plus a price floor for solar cells, or a tariff plus a quota. The two companies agree that the commission should choose one.

The Solar Energy Industries Association, the users coalition, along with solar producer SunPower, argued that a tariff will result in the loss of 62,800 jobs in 2018 and 80,000 jobs in later years. Tariffs will simply increase the price of panels, which will kill solar projects. SEIA in its brief also argued that if tariffs are imposed, the big winner will be Arizona-based thin-film manufacturer First Solar, which does much of its manufacturing in Malaysia.

At the hearing, Suniva and SolarWorld requested a 32-cent-per-watt tariff on crystalline silicon photovoltaic cells.  Suniva continued to push for a price floor on solar panels of 74 cents per watt, while SolarWorld wants a quota on imported cells and panels to cap import supply; both support each other’s idea in the alternative.  In its brief, Suniva stated:

“The crisis caused by foreign market overcapacity now facing the U.S. CSPV cell and module industry is so extreme, the financial losses so great, that, to be effective, any remedy … must be bold, extensive and multifaceted.  [A] strong and effective remedy is required to stop the industry’s bleeding, and then provide breathing space for this American-invented manufacturing technology to grow and thrive.”

But SEIA, which maintains that such trade barriers will devastate the entire U.S. solar industry by raising prices and crippling demand, says the two manufacturers are failing for internal and not external reasons and have asked for more help than the government can grant. Since the ITC must recommend a remedy by mid-November with Trump then to decide within 60 days, SEIA offers these alternatives: technical assistance and job training assistance from government agencies, and an import licensing fee to fund manufacturing growth.

The interesting point is that Suniva and Solar World failed to submit an adjustment plan to the ITC to show, in direct contrast to Harley Davidson, how they will adjust to import competition if they are given relief.

SEIA argued in its brief:

“The commission should rely on its trade policy expertise to create and recommend constructive advice instead of resorting to trade restraints.  Denying the existence of the tens of thousands of jobs that are at stake, denying the reality and importance of grid parity, and denying the domestic industry’s internal problems in favor of scapegoating imports will not help the industry or serve the national interest.”

TRUMP AND CHINA

But what about developments regarding trade with China, as indicated below new trade cases are being filed against China in the antidumping and countervailing duty area and for IP violations under Section 337.

During her speech mentioned above, Laura Ingraham argues that there is no remedy if imports come into the US that infringe US intellectual property rights.  That simply is not true.

Under Section 337, 19 USC 1337, Petitioners holding valid IP rights can filed a Section 337 case at the US ITC and after a year long proceeding, the ITC will issue an order excluding the infringing imports at the border.

In addition, if the imports infringe US trademarks or copyrights, Petitioner can go directly to Customs, which will exclude the infringing exports at the border.

In addition, if Chinese exports infringe US intellectual property rights, such as trademarks and copyrights, a US company can go directly to Chinese Customs and stop the export of infringing exports.

But with China’s decision to help on North Korea, I suspect that during Trump’s visit to China in November deals will be reached.  But as Charlene Barshefsky has indicated in her speech to the Wall Street Journal above, the real problem is China’s decision to close down areas to US investment and put up barriers to US imports.

In light of the US position in the NAFTA talks, we can expect the US to demand reciprocity.  Trump and Congress may well take the position that we will close off the US market to the Chinese investment in the same areas where China blocks US investment in.  The US should also consider closing off Chinese imports into sectors where the US cannot export into.  That is reciprocity.

There are many fights to come.

SECTION 301 CASE AGAINST CHINA ON FORCED TECHNOLOGY TRANSFERS MOVES FORWARD

In the attached August 18th Federal Register notice based on an August 14th Presidential Memorandum, 301 INITIATION NOTICE, President Trump pulled the trigger on the Section 301 Intellection property case against China.  The Section 301 investigation could take a year and probably will lead to negotiations with the Chinese government on technology transfer.  If the negotiations fail, the US could take unilateral action, such as increasing tariffs, or pursue a case through the World Trade Organization.  Unilateral actions under Section 301, however, also risk a WTO case against the United States in Geneva.

The notice states that the USTR will specifically investigate the following specific types of conduct:

First, the Chinese government reportedly uses a variety of tools, including opaque and discretionary administrative approval processes, joint venture requirements, foreign equity limitations, procurements, and other mechanisms to regulate or intervene in U.S. companies’ operations in China, in order to require or pressure the transfer of technologies and intellectual property to Chinese companies. Moreover, many U.S. companies report facing vague and unwritten rules, as well as local rules that diverge from national ones, which are applied in a selective and non-transparent manner by Chinese government officials to pressure technology transfer.

Second, the Chinese government’s acts, policies and practices reportedly deprive U.S. companies of the ability to set market-based terms in licensing and other technology-related negotiations with Chinese companies and undermine U.S. companies’ control over their technology in China. For example, the Regulations on Technology Import and Export Administration mandate particular terms for indemnities and ownership of technology improvements for imported technology, and other measures also impose non-market terms in licensing and technology contracts.

Third, the Chinese government reportedly directs and/or unfairly facilitates the systematic investment in, and/or acquisition of, U.S. companies and assets by Chinese companies to obtain cutting-edge technologies and intellectual property and generate large-scale technology transfer in industries deemed important by Chinese government industrial plans.

Fourth, the investigation will consider whether the Chinese government is conducting or supporting unauthorized intrusions into U.S. commercial computer networks or cyber-enabled theft of intellectual property, trade secrets, or confidential business information, and whether this conduct harms U.S. companies or provides competitive advantages to Chinese companies or commercial sectors.

The United States Trade Representative (“USTR”) held a hearing on October 10th at the International Trade Commission.  During the October 10th hearing, only two US companies appeared to argue that their IP was stolen by Chinese government actions.  Juergen Stein, CEO of SolarWorld Americas stated that his company was a victim of Chinese “state-sponsored hacking and theft” while it was pursuing his AD and CVD cases against China.  Stein further stated that this “greatly weakened SolarWorld’s first-mover status, and again left SolarWorld vulnerable to China’s relentless effort to take over the U.S. solar industry through the sale of solar cells and panels below the cost of production,”

Just one other company, American Superconductor Corp., testified that it had been badly hurt by Chinese theft of its intellectual property.  The company accused a Chinese state-owned enterprise, Sinovel Wind Group, of stealing its intellectual property. AMSC has lost over $1.6 billion in company value and 70 percent of its workforce over the past six years as a result, AMSC President Daniel Patrick McGahn said.

“We believe that over 8,000 wind turbines – most owned by large Chinese utility state-owned enterprises – currently are operating on stolen AMSC IP I personally believe such actions should have consequences. The negative impact of Sinovel’s IP theft on the financial health of AMSC has been dramatic.”

A third company, ABRO Industries, said it had learned to work within the Chinese intellectual property protection system to address problems when they arise. William Mansfield, director of intellectual property at ABRO, also urged the Trump administration to refrain from rash action, stating, “The time for gunboat diplomacy is long since past.”

Acting Assistant USTR for China Terry McCartin, commenting on the dearth of business witnesses, said some companies had expressed concern “about retaliation or other harm to their businesses in China if they were to speak out in this proceeding.”

But as indicated in an article by Dan Harris, the problem may be that US companies on their own gave away their IP because of bad business decisions.  The US government cannot protect US companies from the consequences of bad business decisions.  See August 30, 2017 article by Dan Harris entitled “China-US Trade Wars and the IP Elephant in the Room”, on his China law blog at http://www.chinalawblog.com/2017/08/china-us-trade-wars-and-the-ip-elephant-in-the-room.html.

CHINA NME STATUS

On the question of China’s nonmarket economy status in AD and CVD cases, in light to the expiration of the 15-year deadline in the China-WTO Agreement on December 16, 2016 and a Chinese case in the WTO, the EU on October 3rd reached agreement with the European Council and Parliament to overhaul its antidumping procedures.  Pursuant to the Agreement, the EU will decide the issue on a case-by-case basis, leaving it up to the EU Government to determine whether a Chinese industry has demonstrated enough independent from the Chinese government.

In the announcement, the EU stated:

“The new legislation introduces a new methodology for calculating dumping margins for imports from third countries in case of significant market distortions, or a pervasive state’s influence on the economy.  The rules are formulated in a country- neutral way and in full compliance with the EU’s WTO obligations.”

EU Trade Commissioner Cecilia Malmström further stated:

“Having a new methodology in place for calculating dumping on imports from countries which have significant distortions in their economies is essential to address the realities of today’s international trading environment. The commission has repeatedly stressed the importance of free but fair trade and the agreement today endorses that view.”

WINE FIGHT AGAINST BRITISH COLUMBIA AND CANADA

In the attached complaint filed by the United States against Canada on Wine, WTO WINE COMPLAINT, a case which is near and dear to my heart, on October 2, 2017 the Trump administration revived an Obama-era World Trade Organization case against Canadian rules that have allegedly kept U.S. wine off grocery store shelves in British Columbia, according to a WTO document circulated on Monday.

According to the US complaint:

“The BC wine measures provide advantages to BC wine through the granting of exclusive access to a retail channel of selling wine on grocery store shelves.  The BC measures appear to discriminate on their face against imported wine by allowing only BC wine to be sold on regular grocery store shelves while imported wine may be sold in grocery stores only through a so-called store within a store.”

According to prior statements from the government and the industry backing the case, many retailers in Canada have not taken the necessary steps to set up their “store within a store” to sell foreign wine, likely because of the high costs associated with controlled access and separate cash registers.

According to the complaint:

“These measures appear to be inconsistent with Canada’s obligations … because they are laws, regulations or requirements affecting the internal sale, offering for sale, purchase or distribution of wine and fail to accord products imported into Canada treatment no less favorable than that accorded to like products of Canadian origin.”

In the following months, Argentina, Australia, the European Union and New Zealand all asked to join the case, according to the World Trade Organization website.

USTR asserts the provincial regulations discriminate against imported wine because they only allow wine from British Columbia to be sold on regular grocery store shelves. In contrast, imported wine may only be sold in the province’s grocery stores through a so-called store within a store.

“British Columbia’s discriminatory regulations continue to be a serious problem for U.S. winemakers,” USTR spokeswoman Amelia Breinig said. “USTR is requesting new consultations to ensure that we can reach a resolution that provides U.S. wine exporters fair and equal access in British Columbia.”

In fact, BC Wine regulations are probably the most protectionist in the World, worse than China requiring the equivalent of an 80% tariff to sell imported wine.  BC protectionist measures on wine simply feed right into the Trump argument on NAFTA that it is not a free trade agreement.

SECTION 232 STEEL AND ALUMINUM CASES REMAIN STALLED

The Section 232 Steel and Aluminum cases appear to have stalled for the time being.  No news on the Section 232 front raises the question what can be done for US Steel and Aluminum companies injured by imports without distorting the US market and expanding the problems.  Across the board tariffs on steel imports would create enormous collateral damage on the many US producers that use steel as a raw material input to produce downstream steel products.  Such a remedy would probably result in the loss of 100s of thousands of US job.

That is the problem with purely protectionist decisions.  They distort the US market and simply transfer the problems of the steel industry to other downstream industries.

But does that mean the US government should simply let the US Steel industry and other manufacturing industries die?  The election of Donald Trump indicates that politically that simply is not a viable option.

Although Joseph Schumpeter in his book Capitalism, Socialism and Demcracy coined the term “creative destructionism”, which conservatives and libertarians love to quote, they do not acknowledge the real premise of Schumpeter’s book that capitalism by itself could not long survive.  Schumpeter himself observed the collateral damage created by pure capitalism.

So what can be done for the steel and other manufacturing industries?  Answer work with the companies on an individual basis to help them adjust to import competition and compete in the markets as they exist today.  Moreover, there is already a government program, which can serve as a model to provide such a service—the Trade Adjustment Assistance for Companies Program.

What is the TAA for Companies secret sauce?  Making US companies competitive again.  Only by making US manufacturing companies competitive again will the trade problems really be solved.  US industry needs stop wallowing in international trade victimhood and to cure its own ills first before always blaming the foreigners.  That is exactly what TAA for Companies does—helps US companies cure their own ills first by making them competitive again.

TRADE ADJUSTMENT ASSISTANCE FOR FIRMS/COMPANIES – A BETTER ALTERNATIVE TRADE REMEDY WHICH ACTUALLY WORKS

As stated above, there is another more productive way to solve the Steel crisis and fix the trade problem and help US companies, including Steel and other companies, adjust to import competition.  This program has a true track record of saving US companies injured by imports.

This was a problem personally approved by President Ronald Reagan.  The Trade Adjustment Assistance for Firms/Companies program does not put up barriers to imports.  Instead the TAA for Companies program works with US companies injured by imports on an individual basis to make them more competitive.  The objective of TAA for Companies is to save the company and by saving the company it saves the jobs that go with that company.

But as stated in the video below, for companies to succeed they must first give up the mentality of international trade victimhood.

In contrast to TAA for workers, TAAF or TAA for Companies is provided by the Economic Development Administration at the Commerce Department to help companies adjust to import competition before there is a massive lay-off or closure.  Yet the program does not interfere in the market or restrict imports in any way.

Moreover, the Federal government saves money because if the company is saved, the jobs are saved and there are fewer workers to retrain and the saved company and workers end up paying taxes at all levels of government rather than being a drain on the Treasury.  To retrain the worker for a new job, the average cost per job is $50,000.  To save the company and the jobs that go with it in the TAA for Companies program, the average cost per job is $1,000.

Moreover, TAA for Firms/Companies works.  In the Northwest, where I am located, the Northwest Trade Adjustment Assistance Center, http://www.nwtaac.org/, has been able to save 80% of the companies that entered the program since 1984. The Mid-Atlantic Trade Adjustment Assistance Center, http://www.mataac.org, uses a video, http://mataac.org/howitworks/, to show in detail how the program resulted in significant turnarounds for four companies. The reason the TAA for Firms/Companies is so successful—Its flexibility in working with companies on an individual basis to come up with a specific adjustment plan to make them competitive once again in the US market as it exists today.  For a sample recovery plan, see http://mataac.org/documents/2014/06/sample-adjustment-plan.pdf, which has been developed specific to the strengths, weaknesses and threats each company faces.

But TAA for Companies has been cut to the bone.  On August 22, 2017, in the attached press release, US Commerce Department Announces $133 Million to Boost Competitiveness of US Ma, the U.S. Commerce Department announced $13.3 Million to Boost Competitiveness of U.S. Manufacturers.

Are such paltry sums really going to help solve the manufacturing crisis in the Steel and other industries?  Of course not!!

But when the program was originally set up, the budget was much larger at $50 to $100 million.  If the program was funded to its full potential, yes steel companies and other companies could be saved.

To those libertarian conservatives that reject such a program as interference in the market, my response is that this program was personally approved by your icon, President Ronald Reagan.  He understood that there was a price for free trade and avoiding protectionism and that is helping those companies injured by import competition.  But teaching companies how to be competitive is a much bigger bang for the buck than simply retraining workers.  And yes companies can learn and be competitive again in the US and other markets.

NEW TRADE CASES

ANTIDUMPING AND COUNTERVAILING DUTY CASES

PTFE RESIN

On September 28, 2017, the Chemours Company FC LLC filed AD and CVD cases against imports of Polytetrafluoroethylene (PTFE) Resin from China and India.

FORGED STEEL FITTINGS

On October 5, 2017, the Bonney Forge Corporation and the United Steel, Paper and Forestry, Rubber, Manufacturing, Energy, Allied Industrial and Service Workers International Union filed AD and CVD cases against imports of Forged Steel Fittings from China Italy and Taiwan.

UNIVERSAL TRADE WAR CONTINUES

FOREIGN ANTIDUMPING AND COUNTERVAILING DUTY LAW AND CASES

CHINESE ANTIDUMPING CASES AGAINST US AND JAPAN

HYDRIOC ACID FROM THE US and JAPAN

On October 16, 2917, China Ministry of Commerce (“MOFCOM”) published the attached initiation notice of antidumping investigation against Hydriodic Acid from the USA and Japan, Initiation Notice_Hydriodic Acid_EN.  The alleged dumping margin on the US imports is 36.09% and Japanese imports is 41.18%

The Target companies in the US are: USA: Iofina Chemical, Inc.; IOCHEM Corporation and Ajay North America, LLC

The Target Companies in Japan are: SE Chemicals Corporation, NIPPOH CHEMICALS CO., LTD. and TOHO Earthtech, Inc.

CHINA AD/CVD NEWSLETTERS

Attached are newsletters from Chinese lawyer Roland Zhu and his trade group at the Allbright Law Office about Chinese trade law.  Team’s newsletter-EN Vol.2017.37 Team’s newsletter-EN Vol.2017.38 Team’s newsletter-EN Vol.2017.39 Team’s newsletter-EN Vol.2017.40

SECTION 337 AND IP CASES

NEW 337 CASES AGAINST CHINA

REUSABLE DIAPERS

On September 19, 2017, Cotton Babies, Inc filed a section 337 case against imports of Certain Reusable Diapers, Components Thereof, and Products Containing the Same.  The respondent companies named in the complaint are:

Alvababy.com, China; Shenzhen Adsel Trading Co., Ltd.d/b/a Alva, China; and Huizhou Huapin Garment Co., Ltd., China.

AMORPHOUS METALS

On September 19, 2017, Metglas, Inc. and Hitachi Metal, Ltd. filed a section 337 case against imports of amorphous metals and products containing same.  The named respondents in the case are:

Advance Technology & Materials, China; AT&M International Trading Co., Ltd., China; CISRI International Trading Co., Ltd., China; Beijing ZLJG Amorphous Technology Co., Ltd., China; Qingdao Yunlu Energy Technology Co., Ltd., China; Dr. Hideki Nakamura, Japan; and Mr. Nobrou Hanai. Japan.

LED LIGHTING

On September 21, 2017, Philips Lighting North America Corp. and Philips Lighting Holding B.V. filed a section 337 case against imports of LED Lighting Devices and LED Power Supplies.  The named respondents in the case are:

Feit Electric Company, Inc., Pico Rivera, California;  Feit  Electronic  Company,  Inc., (China),  China;  Lowe’s  Companies,  Inc.,  Mooresville,  North  Carolina; L G Sourcing,  Inc., North  Wilkesboro,  North Carolina; MSi Lighting, Inc., Boca Raton, Florida; RAB Lighting Inc., Northvale, New Jersey; Satco Products, Inc., Brentwood, New York;  Topaz  Lighting Corp.,   Holtsville, New York; Wangs Alliance Corporation d/b/a WAC Lighting Co., Port Washington, New York; and WAC Lighting (Shanghai) Co. Ltd. , China.

REUSABLE RAZORS
On September 27, 2017, The Gillette Company LLC filed a section 337 case against imports of Certain Shaving Cartridges, Components Thereof and Products Containing Same.  The named respondents in the case are:

Edgewell Personal Care Company, Chesterfield, Missouri; Edgewell Personal Care Brands, LLC, Shelton, Connecticut; Edgewell Personal Care, LLC, Shelton, Connecticut; Schick Manufacturing, Inc., Shelton, Connecticut; and Schick (Guangzhou) Co., Limited, China.

BEVERAGE CONTAINERS

On September 28, 2017, YETI Coolers, LLC filed a section 337 case against imports of Insulated Beverage Containers, Components, Labels, and Packaging Materials.  The named respondents are:

Alibaba (China) Technology Co., Ltd., Hong Kong; Alibaba Group Holding Limited, c/o Alibaba Group Services Limited, Hong Kong; Alibaba.com Hong Kong Limited, Hong Kong; Alibaba.com Singapore E-Commerce Private Limited, Hong Kong; Bonanza.com, Inc., Seattle, Washington; ContextLogic, Inc. d/b/a Wish, San Francisco, California; Dunhuang Group, China; Hangzhou Alibaba Advertising Co., Ltd., Hong Kong; Huizhou Dashu Trading Co., Ltd., China; Huagong Trading Co., Ltd., China; Tan Er Pa Technology Co., Ltd., Hong Kong; Shenzhen Great Electronic Technology Co., Ltd., China; and SZ Flowerfairy Technology Ltd., China.

If you have any questions about these cases or about the Trump Trade Crisis, NAFTA, FTAs, , including the impact on agriculture, the impact on downstream industries, the Section 232 cases, the 201 case against Solar Cells, US trade policy, the antidumping or countervailing duty law, trade adjustment assistance, customs, False Claims Act or 337 IP/patent law, please feel free to contact me.

Best regards,

Bill Perry

US CHINA TRADE WAR–TRUMP SIMPLISTIC APPROACH TO TRADE INJURES US COMPANIES, US AGRICULTURE BADLY HURT, NAFTA NOT GOING WELL, SECTION 301 AND 232 CASES, TRADE ADJUSTMENT ASSISTANCE, SOLAR, FALSE CLAIMS ACT, MORE CASES

White House Washington DC

TRADE IS A TWO WAY STREET

“PROTECTIONISM BECOMES DESTRUCTIONISM; IT COSTS JOBS”

PRESIDENT RONALD REAGAN, JUNE 28, 1986

US CHINA TRADE WAR AUGUST 30, 2017

 

Dear Friends,

As stated in many past blog posts, it is easy for Candidate Trump to talk protectionism, but President Trump is now learning it is much more complicated.  Trump’s decision to push protectionism endangers his standing with a core constituency—farmers and rural America.  As stated below, Trump’s decision to tear up the Trans Pacific Partnership (“TPP”) has already had a major negative impact on farmers.

Trump’s call for an economic war with China and other countries is already having a ramification.  Trump’s threat to pull out of NAFTA is not helping the US position in the negotiations.  Trump simply does not understand the ramifications of the trade deal when he terminated the TPP or when he threatens to tear up NAFTA.

The Trump trade policy is based on one arrogant presumption—the US market is the largest in the World and the rest of the World must kowtow, come on bended knee, to get into the US and that fact gives the US leverage.  But that fact is no longer true.  The 11 countries in the TPP have a larger market than the US.  China has a larger market than the US so the Trump Administration has to be very careful when it plays this card.

In fact, Canada and Mexico already can fall back on trade agreements they have with other countries, such as Europe.  The United States does not have that luxury.  The US decision by both Trump and the Democrats to go protectionist is further isolating the US in the trade area and is and will have major negative economic ramifications on the US economy.  The chickens will come home to roost.

Trump simply did not understand the dynamics of the Trans Pacific Partnership (“TPP”) and the ramifications of simply terminating it.  During the campaign, Candidate Trump stated that the TPP was a bad deal and if only he led the negotiating the team, it would be a better deal.  Thus, Trump argued that the TPP deal should be terminated and the US should then negotiate bilateral deals with the eleven countries in the TPP.

But two major problems with that strategy are becoming very clear.  First the United States Trade Representative (“USTR”) does not have the personnel to negotiate 11 separate trade deals with the individual countries.  It took more than five years to negotiate the TPP.  With Trump’s steep cuts to the Government bureaucracy, the government resources simply are not there.

Second, Trump did not understand the dynamics of the TPP deal.  During those negotiations, countries could give the US concessions because they would get offsets from other countries and the importance of gaining access to the markets of 11 other countries was worth the concession to the US.

But with no other countries in bilateral deals, the other countries are less willing to make the concessions the US is demanding.  In fact, as Robert Lighthizer, the USTR, has discovered, many of the countries in the TPP do not want to have a bilateral deal with the US.  They fear and rightly so that the US will demand too much.  Much easier to export and import from other countries.

The same problem is happening in the NAFTA negotiations.  Trump is threatening to leave NAFTA when he simply does not understand the dynamics of the deal and the devastating impact that such a withdrawal would have on US farmers and also US manufacturing industries, such as the US auto industry.  Trade is very complicated and running into the trade area like a bull in a China shop simply creates enormous damage.  That damage will be borne by the US agricultural industry and US manufacturers and that means the loss of 1000s if not 100s of thousands of jobs.

Labor unions and working men like the sound of being politically tough on trade and the foreigners, but when jobs are lost, those same people may not like the actual reality of a very protectionist policy.  Many American politicians, such as Donald Trump and Senators Chuck Schumer and Bernie Sanders, like to be tough on trade because foreigners do not vote.  But if the economy is hurt by Trump’s trade actions, his base will be hurt and he will not be the next President.  So there a lot riding on Trump’s trade policy and his Administration has run straight into the Wall of actual trade reality.

The only saving grace for Trump is that as evidenced by Senators Chuck Schumer and Bernie Sanders, the Democrats are even more protectionist than Trump.  But neither the Democrats nor Trump understand the true ramifications of simply walking away from trade deals that open up foreign markets.  The US agricultural industry is now learning those ramifications.

By kowtowing to the Steel industry with its 141,000 jobs, these trade actions could costs thousands, if not hundreds of thousands, of jobs in downstream industries and other industries, such as Agriculture. It is time for the United States to wake up to the benefits of trade.

It is also time for the United States to find a way to make its companies more competitive in the US and international markets as they exist now rather than erect protectionist barriers to international competition.  See the article on Trade Adjustment Assistance for Companies below and how companies, including steel companies, can be saved from import competition by making them competitive again.

USTR has also initiated a section 301 case against forced technology transfers in deals with China.  But in an August 30, 2017 article by Dan Harris, my partner, entitled “China US Trade Wars and the IP Elephant in the Room”, Dan states that in over one hundred deals with Chinese companies, he has not seen US companies forced to give over their Intellectual Property (“IP”) by the Chinese government.  Instead he has seen US companies make bad decisions leading them to give away their IP by their own volition.  If US companies do not protect their IP rights, they will lose them.  The US Government cannot protect against stupid mistakes.

Meanwhile, the Section 232 Steel and Aluminum cases remain on hold.  The Section 201 case against imports of Solar Cells continues with the ITC hearing being 11 hours long. The United States has intervened in a False Claims Act case against Furniture.  Commerce has also issued a circumvention determination in the Aluminum Extrusions case.

More Antidumping and Countervailing Duty and 337 cases have been filed against China and the trade beat goes on.

If anyone has any questions or wants additional information, please feel free to contact me at my e-mail address bill@harrisbricken.com.

Best regards,

Bill Perry

THE WEAKNESS IN DONALD TRUMP’S ECONOMIC POLICY—TRADE

Donald Trump’s political strategy is fight the cultural war, but win the next election because of his economic policy.  If jobs and wages are up, more companies move into the US, Trump’s firm belief is that he wins the next Presidential election.  Even Michael Moore, the Democratic gadfly, believes that Trump will win reelection by carrying the states that he already won.  See https://www.fastcompany.com/40459122/michael-moore-says-trump-is-on-track-to-win-again-in-2020.

There is only one fly in the ointment, flaw in this strategy—Trade.  If the Trump trade policy hurts farmers, Trump could lose the rural states: Iowa, Kansas, North Dakota, South Dakota, Montana, Wisconsin, Oklahoma, and Arkansas, to name a few and that could lead to Trump’s loss in the next Presidential election.

The economic nationalist Steve Bannon, who is credited with helping get Donald Trump elected by in part pushing the American First Trump policy, was recently forced out of the White House.  Before he left, however, Bannon made his trade position crystal clear.  in an article entitled “Steve Bannon Unrepetent”, in the American Prospect” magazine on August 16, 2017, Bannon stated with regards to trade policy:

“We’re at economic war with China,” he added. “It’s in all their literature. They’re not shy about saying what they’re doing. One of us is going to be a hegemon in 25 or 30 years and  it’s gonna be them if we go down this path.  . .

Bannon went on to describe his battle inside the administration to take a harder line on China trade, and not to fall into a trap of wishful thinking in which complaints against China’s trade practices now had to take a backseat to the hope that China, as honest broker, would help restrain Kim.

“To me,” Bannon said, “the economic war with China is everything. And we have to be maniacally focused on that. If we continue to lose it, we’re five years away, I think, ten years at the most, of hitting an inflection point from which we’ll never be able to recover.”

Bannon’s plan of attack includes: a complaint under Section 301 of the 1974 Trade Act against Chinese coercion of technology transfers from American corporations doing business there, and follow-up complaints against steel and aluminum dumping. “We’re going to run the tables on these guys. We’ve come to the conclusion that they’re in an economic war and they’re crushing us.”

From Bannon’s point of view, trade is economic war.

Although Bannon has since left the White House, President Trump and Commerce Secretary Ross apparently share Bannon’s thinking.  On August 22nd, without understanding the ramifications on his voter base, President Trump announced that he might simply cancel NAFTA.  Apparently, Trump believes that both Mexico and Canada are winning the economic war against the United States.

On August 28th, in an article entitled “Exclusive: Trump vents in Oval Office, “I want tariffs. Bring me some tariffs!”, Axios reported that in the first Oval Office meeting with Chief of Staff John Kelley and the last meeting with Steve Bannon, President Trump stated:

Trump, addressing Kelly, said, “John, you haven’t been in a trade discussion before, so I want to share with you my views. For the last six months, this same group of geniuses comes in here all the time and I tell them, ‘Tariffs. I want tariffs.’ And what do they do? They bring me IP. I can’t put a tariff on IP.”  . . .

“China is laughing at us,” Trump added. “Laughing.”

Kelly responded: “Yes sir, I understand, you want tariffs.” . . . .

Staff secretary Rob Porter, who is a key mediator in such meetings, said to the president: “Sir, do you not want to sign this?” He was referring to Trump’s memo prodding Lighthizer to investigate China — which may lead to tariffs against Beijing.

Trump replied: “No, I’ll sign it, but it’s not what I’ve asked for the last six months.” He turned to Kelly: “So, John, I want you to know, this is my view. I want tariffs. And I want someone to bring me some tariffs.”

Kelly replied: “Yes sir, understood sir, I have it.” . . .

Trump made sure the meeting ended with no confusion as to what he wanted.

“John, let me tell you why they didn’t bring me any tariffs,” he said. “I know there are some people in the room right now that are upset. I know there are some globalists in the room right now. And they don’t want them, John, they don’t want the tariffs. But I’m telling you, I want tariffs.” . . . .

Emphasis in the original.

Trump’s statements in this article ring true because during the Presidential campaign, Donald Trump made it very clear that he likes tariffs.

On August 28th, however, George Will in an Op-ed article entitled “Trump, The Novice  Protectionist” in Investors Business Daily responded to the Trump trade policy stating:

“Foreigners, however, have their uses. After the president trumpeted that the Dow surpassing the 22,000 mark was evidence of America’s resurgent greatness, The Wall Street Journal rather impertinently noted this: Boeing, whose shares have gained 50% this year and which accounted for 563 of the more than 2,000 points the Dow had gained this year en route to 22,000, makes about 60% of its sales overseas. Boeing has a backlog of orders for 5,705 planes, 75% going outside North America. For Apple, the second-biggest contributor (283 points) to this year’s Dow gain at that point, foreign sales are two-thirds of its total sales. Foreign sales are also two-thirds of the sales of McDonald’s, the third-biggest contributor (239 points).

Mark Perry of the American Enterprise Institute says that in the last 20 years the inflation-adjusted value of U.S. manufacturing output has increased 40% even though — actually, partly because — U.S. factory employment decreased 5.1 million jobs (29%).  . . . Increased productivity is the reason there can be quadrupled output from the same number of workers.  According to one study, 88% of manufacturing job losses are the result of improved productivity, not rapacious Chinese.

But those Democrats who think government should fine-tune everything are natural protectionists (Sen. Charles  Schumer: “They’re  rapacious, the  Chinese”)  and probably think Trump is too fainthearted because he is not protecting Americans from competition from Americans.  . . .”

TRUMP TRADE WAR—THE SIMPLISTIC APPROACH TO TRADE COULD WELL DAMAGE THE US ECONOMY AND DOOM THE TRUMP ECONOMIC PLAN

In the above articles about Bannon’s and Trump’s approach to trade along with the below op-ed article in the Wall Street Journal by Commerce Secretary Wilbur Ross, the Trump trade team reveal the protectionist bent of the Trump Administration, which is based, in part, on blind arrogance and a simplistic approach to trade policy.

The Bannon and Trump approach reveal fatal misunderstandings:  trade is a two-way street, and US exports are critical to the wellbeing of Donald Trump’s own constituents.  In international trade, what goes around comes around.  What the US does to other countries, they can do back to the US.

Moreover, Bannon, Ross and Trump are confusing economic warfare with economic competition.  The United States has always strongly believed that economic competition is good for the economy, the country and the US consumer.  The bedrock principle of the importance of economic competition to wellbeing of the US economy is the reason the US antitrust laws were enacted. As Deputy Assistant Attorney General Roger Alford of the US Justice Department’s Antitrust Division recently stated on August 30th at a Competition Policy Forum in Shanghai China:

Our continued engagement on this topic is significant for competition enforcement. We are the guardians of strong and vigorous competition for economic prosperity. Our lodestar is to promote competition, not to give preference to specific competitors, even when individual businesses jockey for advantage.  . . .

Emphasis added.

Bill Gates believed that Microsoft had to go to war with its competition, but frankly that is why Microsoft produced such good software.  CEOs of companies are driven by competition to produce better products at lower prices, which means stronger US companies and prosperity for the US economy and US consumers.  Stronger US companies means more jobs at higher wages.

Protecting US companies from international competition does not strengthen the US companies.  It weakens them and the poster child for such a point is the US Steel industry, which has had 40 years of protection from steel imports.

This is exactly why President Ronald Reagan was so opposed to protectionism.  As President Reagan stated above in June 1986: “Protectionism is destructionism. It costs jobs.”

Moreover, Steve Bannon and Donald Trump have not figured out one important point: Not only do companies compete against each other and States compete against each other, but the United States and other countries compete against each other.  The US decision to go the Protectionist route means it has given up competing, and, therefore, it will lose the economic war.  Trump’s and Bannon’s combined with the Democrat’s protectionist policies mean the US will lose the economic war because of its decision to look inward and no longer compete in the international economic marketplace.

US companies do not get stronger by protecting them from international competition, which simply promotes the mentality of international trade victimhood.  US companies get stronger by looking inward and working harder to become internationally competitive.  See the article about Trade Adjustment Assistance for Companies below.

The arrogance of the Steve Bannon and the Trump trade policy is based on the principle that the United States is the largest market in the World, and this gives the US leverage and, therefore, countries must kowtow and bend their head to get into the US market.  Although that principle may have been true twenty years ago, it is simply no longer true.

The Trans Pacific Partnership, for example, combines the markets of 12 countries, now 11 with the US exit, into one “huge” trading block.  Since Mexico, Canada, Japan, Australia and New Zealand are part of that block, the TPP market is a much larger market than the US alone.  Mexico and Canada are also in a stronger trade position than the US because they already have free trade agreements with a number of other countries, including the EC, and that gives them a substantial competitive advantage getting into those markets.  This fact gives Canada and Mexico leverage in the NAFTA negotiations even though Trump, Lighthizer and Ross simply do not understand the dynamics of the deal.

Maybe this is a major reason US companies move to Mexico and Canada to get better access to other foreign markets.  The United States is competing with other countries too.

Also in many ways, with 1.37 billion people China has a larger market than the US.  In 2006, at a speech in Beijing, the US Commercial Attaché stated that 75% of all Chinese, including rural Chinese, have a color television set.  Now that is close to 95% of 1.37 billion.  That is a larger market than the US with its 323 million.

Also the upper class and upper middle class in China, which numbers between 250 to more than 300 million, have an income closer to the US and that segment of the China market is the same size, if not larger, than the US.  That is why in the push for the Trans Pacific Partnership (“TPP”), House Speaker Paul Ryan used to state that 75% of the World’s consumers are outside the United States.

But China is also not this overwhelming behemoth with an economic juggernaut that is going to crush the US.  Yes, it may have a larger market, but on a per capita basis, it is much smaller.  Thus, the US per capita income on average is $57,000 where the Chinese per capita income is $8,000.  China has its own problems—keeping its people happy and fed.

Along with these problems, China has major weaknesses, which can be exploited by the US.  China has a very high personal tax rate, which can be as high at 45%.  This high tax rate is why many Chinese have emigrated to the US, looking for a lower tax rate and a better opportunity to keep the money they earn.  If Trump can drive taxes lower, that may result in more entrepreneurs and businesses moving to the US, e.g. Foxconn.

Another problem is the Chinese government’s strict control of information flowing into China by its very strong control of the internet.  Strict control of the internet stops knowledge flowing into China, which especially hurts the country’s high tech sector.  When information and knowledge stop, economies do not do as well.  The free flow of knowledge and ideas is critical for the most advanced economies and yet that is not true in China.

But arrogance is one of the great sins because it blinds you to all options.  To make a better deal in trade negotiations, the Administration has to do its homework and first understand the actual American interest.  If one is going to make America great again, one must first understand what is the nature of America’s interest in trade.  This requires understanding the dynamics of the trade deal in question, which President Trump prides himself in doing.  The Trump Administration must understand the actual trade deal closely, the US leverage points and the US weaknesses, what trade deals will help the US and the what trade deals will hurt the US interest.  Donald Trump’s failure in trade negotiations is to understand the dynamics of the deal and the leverage that the US has in trade negotiations.  In other words, with regards to trade, Trump simply does not understand “The Art of the Deal”.

In ripping up the TPP without even trying to renegotiate, Trump failed his own test because he did not understand the elements of the deal.  Trump’s philosophy was to do away with multilateral deals because they fall to the lowest common denominator and do only bilateral deals because that gives the US more control over the deal and if the country does not live up to its side of the bargain cancel the deal.

The problem with that approach is first the US government does not have the personnel at USTR, which is very lean and mean, to negotiate 11 separate trade deals with all the countries in the TPP.  It took more than 5 years to negotiate the TPP.

But secondly and more important, in recent bilateral negotiations, Canada, Mexico and Japan have all told the US do not assume that in bilateral deals or NAFTA, the United States will get the same deal it would have gotten in the TPP.  In fact, as indicated below, many countries in the TPP simply do not want to do a bilateral deal with the US—too much work.  Canada, Mexico and Japan were willing to give the US a better deal because they would gain access to a much greater market, the market of 11 additional countries.  That gave countries the political ability to play one national interest against another national interest.  Thus, Canada could give in to the US on dairy products because of the potential access to the much larger TPP market, including the Japanese and US markets.  Thus, countries in the TPP could use tradeoffs with other countries to open their markets further to US exports.  Those trades offs and the market access to the markets of 12 different countries does not exist with a bilateral deal with just the US.

On August 24, 2017, in an article entitled “Revived TPP may exclude trade concessions sought by US”, Nikkei, a Japanese newspaper, stated:

TOKYO — Japan is proposing suspending trade concessions made to the U.S. as part of the Trans-Pacific Partnership in order to resurrect the pact with the 11 remaining members.

Tokyo sounded out that proposal to other nations in the “TPP 11,” as those members became known after the U.S. withdrew from the deal. Senior negotiators will cite items they wish to see shelved during three days of talks starting Monday in Australia.

Washington had secured a number of major concessions from other nations in exchange for lower American tariffs on their exports. Though President Donald Trump pulled the U.S. out of the deal, those concessions remain on the TPP’s books — to the consternation of other members.

If all the 11 participants agree unanimously, any such concession would be put on hold, and national regulations governing that element of the pact would remain in place.
But the suspensions would be lifted if and when the U.S. decides to return to the partnership.

While the remaining members are leaning toward keeping the lower tariffs agreed on among the initial group, they are likely to revisit specific trade rules.

The U.S. sided with major domestic drug companies and settled on an effective eight-year window before competitors can have access to proprietary pharmaceutical data. That moratorium exceeds international standards, and other countries think it would impede development of cheap generics. All members of the TPP 11 are expected to agree on freezing that provision.

Other provisions that may be suspended involve copyright protection periods, fair-competition policies governing state-owned enterprises and the opening of government procurement to foreign capital.

American exports would face a competitive disadvantage if an 11-member TPP goes into force. Tokyo hopes that U.S. meat industry leaders will speak up in favor of rejoining the trade deal.

Trade is the one weak link in Trump’s economic plan.  As indicated below, the decision to kill the TPP has already had a major negative impact on US agriculture and part of Trump’s base, the rural states, where agriculture is king.

SIMPLICITY IS OFTEN A GOOD TRADE POLICY BUT NOT WHEN THE POLICY IS SIMPLE MINDED AND NARROWLY FOCUSED

Trump has slowed down the Section 232 Steel and Aluminum Investigations because its “complicated”, but when Bannon and Trump take a very simplistic, black and white view of trade, it is extremely dangerous to the US economy and Donald Trump’s own constituents.

This is not a fight between Globalism and America First.  The America First strategy requires the Administration to understand deeply the interest of the United States and the interest of all the significant US industries in trade negotiations, including agriculture, not just the narrow Steel and Aluminum Industries. The Trump and  Bannon statements indicate a deep failure to analyze why Trump won the election and what the interest of the entire United States is in trade negotiations and also the interest of Donald Trump’s own constituents, the voters that elected Donald Trump President.

Bannon thinks that if we create a trade war with China and are tough on them we will win the economic trade war with China. But Bannon truly has forgotten why voters elected Donald Trump.

First, it was not just the US Steel and Aluminum industries that put Trump in the White House, it was the working man in many manufacturing plants throughout the United States.  Because of their economic, black white view of the World, Trump and Bannon want to put up barriers to steel imports to protect the US Steel industry and its 141,000 jobs without realizing the damaging impact of such an action on the millions of jobs in the downstream steel consuming industries.  Truthfully, if Donald Trump is going to be reelected, Trump himself, his trade team and Steve Bannon cannot be so simple minded.

More importantly Donald Trump also won because of farmers.  Although Trump won the States in the Blue Wall, Michigan, Ohio, Pennsylvania and Wisconsin, he was also able to win the Presidency because he won the US heartland, including the states of Iowa, Kansas, Nebraska, Wyoming, Montana, North Dakota, South Dakota, Arizona, Oklahoma, Utah and Florida.  What do those states have in common and in common with Wisconsin—Agriculture.  And the Trump trade policy is and has seriously hurt US farmers because US farmers are dependent on exports.

As the US Wheat Federation stated in the Section 232 Steel case, half of US wheat is exported.  Putting up protectionist walls invites retaliation against US agricultural exports.

Finally, one other point in direct response to Steve Bannon’s and Trumps statement, substantial trade relations prevent real shooting wars.  As indicated below in the Section 301 article, China is becoming more amenable on North Korea because of its enormous trade relationship with the United States.  The total US China trade relationship is $578.6 billion with $115.8 billion in US exports and $462.8 billion in imports from China.

In direct contrast, the US trade relationship with Russia is much, much smaller.  The total US Russia trade relationship is $38.1 billion with $11.2 in US exports and $27 billion in imports from Russia.  Truly peanuts in the global trade market.  It is better to compete with countries in the economic arena as compared to a real war, where millions die.

DEMOCRATS MORE PROTECTIONIST THAN DONALD TRUMP

The only saving grace for Donald Trump on trade is that the Democrats are even more protectionist.  On August 13th, Senator Chuck Schumer, who heads the Democrats in the Senate, told John Catsimatidis on his New York AM 970 radio show “The Cats Roundtable” that he is closer now to President Donald Trump than he ever was with former President Barack Obama on trade.  Senator Schumer stated:

“Trade is the thing [China cares] most about, and they’ve been treating us very badly on trade for a long time, frankly,.  I was closer in trade views to Donald Trump than I was to either George Bush or Barack Obama, on China anyway. I think we were much too easy on them. But if we got tough on them now, maybe they would relent, but we have to be real tough. So far, the administration has not been as tough as they should be, as far as I’m concerned.”

The Trump Administration should be very tough with China on trade, but it should carefully analyze what its true interests are and the interests of US voters that elected Donald Trump.  The US government should do everything in its power to drop barriers to US exports in China and other countries.  But protectionism for protectionism’s sake will not cure the problems of US manufacturing and right the US China trade balance

TRUMP’S TRADE WAR HURTS US AGRICULTURE AND US FARMERS

As mentioned in prior newsletter, the ox that will be gored by Trump’s trade policy is agriculture and that is just what is happening.  On August 7, 2017, in the attached extensive article entitled “Trump’s Trade Pullout Roils Rural America”, Trump’s Trade Pullout Roils Rural America – POLITICO Magazine, Politico did its homework and described in detail the deep negative impact of the Trump trade policy on US agriculture:

EAGLE GROVE, Iowa—On a cloud-swept landscape dotted with grain elevators, a meat producer called Prestage Farms is building a 700,000-square-foot processing plant. The gleaming new factory is both the great hope of Wright County, which voted by a 2-1 margin for Donald Trump, and the victim of one of Trump’s first policy moves, his decision to pull out of the Trans-Pacific Partnership.

For much of industrial America, the TPP was a suspect deal, the successor to the North American Free Trade Agreement, which some argue led to a massive offshoring of U.S. jobs to Mexico. But for the already struggling agricultural sector, the sprawling 12- nation TPP, covering 40 percent of the world’s economy, was a lifeline. It was a chance to erase punishing tariffs that restricted the United States—the onetime “breadbasket of the world”—from selling its meats, grains and dairy products to massive importers of foodstuffs such as Japan and Vietnam.

The decision to pull out of the trade deal has become a double hit on places like Eagle Grove. The promised bump of $10 billion in agricultural output over 15 years, based on estimates by the U.S. International Trade Commission, won’t materialize. But Trump’s decision to withdraw from the pact also cleared the way for rival exporters such as Australia, New Zealand and the European Union to negotiate even lower tariffs with importing nations, creating potentially greater competitive advantages over U.S. exports.

A POLITICO analysis found that the 11 other TPP countries are now involved in a whopping 27 separate trade negotiations with each other, other major trading powers in the region like China and massive blocs like the EU. Those efforts range from exploratory conversations to deals already signed and awaiting ratification. Seven of the most significant deals for U.S. farmers were either launched or concluded in the five months since the United States withdrew from the TPP.

“I’m scared to death,” said Ron Prestage, whose North Carolina-based family pork and poultry business made its huge investment in the plant near Eagle Grove in part to reap expected gains from the TPP. “I don’t guess I’ve gone beyond the point of no return on the new plant, but we did already start digging our wells and started moving dirt.”

He and other agricultural business people and workers have reason for concern.

On July 6, the EU, which already exports as much pork to Japan as the United States does, announced political agreement on a new deal that would give European pork farmers an advantage of up to $2 per pound over U.S. exporters under certain circumstances—a move which, if unchecked, is all but certain to create a widening gap between EU exports and those from the United States.

European wine producers, who sold more than $1 billion to Japan between 2014 and 2016, would also see a 15 percent tariff on exports to Japan disappear while U.S. exporters would continue to face that duty at the border. For other products, the deal essentially mirrors the rates negotiated under the TPP, which the United States has surrendered, giving the EU a clear advantage over U.S. farmers.

The EU’s deal is all the more noteworthy because American farmers were relying on the TPP—to which the EU was not a member—to give them an advantage over European competitors. But in a further rebuke to the United States, Tokyo decided within a matter of weeks to offer the European nations virtually the same agricultural access to its market that United States trade officials had spent two excruciating years extracting through near-monthly meetings with their Japanese counterparts on the sidelines of the broader TPP negotiations; the United States is now left out.

The EU, which also recently inked a deal with Vietnam, is now moving forward with talks with Malaysia and is in the process of modernizing a pre-existing trade deal with Mexico.

Meanwhile, a bloc of four Latin-American countries—Mexico, Peru, Chile and Colombia, known as the Pacific Alliance—is quickly becoming the leading force for free trade in the region, announcing near the end of June it would commence its own negotiations with New Zealand, Australia and Singapore, heedless of its neighbor to the north.

On its own, Australia, which in 2015 cut a deal to undersell the United States in beef exports to Japan, announced another round of scheduled tariff cuts with Japan. Without the TPP, Australian ranchers eventually will enjoy a 19 percent tariff advantage over U.S. competitors. Australia is also prioritizing the conclusion of trade talks with Indonesia, the largest nation in Southeast Asia by gross domestic product.

The remaining 11 TPP countries have already met two times, with a third meeting planned, to move ahead with the revival of the deal without the United States. The so- called TPP-11 would be in direct response to Trump’s trade policy. Economic forecasts already show projected gains for countries involved. Canada, according to one estimate, could permanently gain an annual market share of $412 million in beef and $111 million in pork sales to Japan by 2035, because lower tariffs would enable it to eclipse America’s position in the market.

As China, which was never a part of the TPP, senses blood in the water, it is moving quickly to assert itself, rather than the United States, as the region’s trade arbiter. China is aiming to close talks by the end of this year on its behemoth Regional Comprehensive Economic Partnership—a trade agreement involving 15 other Asia-Pacific countries.

None of these deals are yet in effect. But already there are signs that competitors are gaining market share over U.S. producers in the post-TPP landscape, as Pacific nations take a closer look at alternatives to U.S. exporters.

Over the first five months of 2017, U.S. exports to Japan of chilled pork, which is preferable to frozen meat, are up 2 percent over the previous year. But exports of chilled pork from Canada, a prime competitor, are up 19 percent. Likewise, in frozen pork, U.S. exports are up 28 percent. But exports from the EU, the leading competitor, are up 44 percent.

Japan, which saw the TPP not only as a source of economic growth but a counterweight to China, is now taking the lead in salvaging the deal. Its goal is to have some sort of agreement between the 11 other countries in place for the annual summit of Asia-Pacific leaders in November. Trump is expected to attend, creating the awkward possibility that he will witness all the handshakes and back slaps as his fellow leaders congratulate themselves on a deal.

For his part, Trump once promised a slew of “beautiful” deals to replace the TPP, but his administration has yet to lay out a detailed strategy. U.S. Trade Representative Robert Lighthizer told lawmakers that an analysis is underway to determine where it makes most sense to pursue negotiations.

In the meantime, Lighthizer, a trade attorney who pressured Japan to voluntarily restrain its steel exports when he was a trade official in the 1980s, said Tokyo should just go ahead and lower their tariffs without expecting anything in return.

“I think in the areas like beef and the others, they ought to be making some unilateral concessions, at least temporary concessions,” he told lawmakers in June. “And I don’t quite understand why that doesn’t happen.”

Lighthizer said the administration still hopes to strike bilateral trade deals—that is, separate agreements with individual countries—but he conceded that “some of the TPP countries don’t want to do bilaterals.” The value of the TPP for many countries was that they could justify giving up protective tariffs in exchange for their own access to the markets of a wide pool of countries; many are unwilling to make such concessions for the smaller gains of a bilateral deal.

Lighthizer acknowledged that even Japan, at least for the time being, may not be interested in one-on-one negotiations with the U.S. . . .

That leaves workers in 13,000-person Wright County, whose survival depends largely on agriculture, with relatively few signs of optimism. Trump’s decision to walk away from the TPP has stoked uncertainty about U.S. trade policy and, more notably, the president’s commitment to rural America.

“He fooled a lot of people,” said Sandy McGrath, mayor of Eagle Grove, who is not affiliated with any party and did not support Trump. . . .

But the plant’s success will depend largely on export opportunities. More than 26 percent of the pork produced in the U.S. in 2016 was exported to foreign markets. And more than $1.5 billion of the nearly $6 billion in U.S. pork exports in 2016 headed for Japan.

“At the time those investment decisions were made, the U.S. had never turned down a free trade opportunity,” said Dermot Hayes, an agricultural economist at Iowa State University, referring to the Prestage plant and other pork-industry investments.

Hayes said the livestock industry had in its sights a future of expansion amid soaring export growth. After Trump’s withdrawal from the TPP, “that has pretty much disappeared,” he said. . . .

In April, when Trump was on the verge of withdrawing from NAFTA, Maier said he watched corn prices plummet in anticipation of the president’s decision. Trump relented, at the request of Perdue, the agriculture secretary, who appealed to the president with colorful maps showing the president’s base was largely concentrated in states that heavily rely on agriculture.

Ultimately, Trump agreed to renegotiations with Canada and Mexico instead. But Maier remains wary that, despite pledges by the administration to “do no harm” for agriculture, the mere act of reopening the deal with Canada and Mexico, the two largest destinations for U.S. agricultural exporters, could mess up what has been a very good thing for American farmers in the Midwest.

“Farmers are willing to open up NAFTA, but if we open up NAFTA, there’s the risk of going backwards,” he said. . . .

The Obama administration, backed by a large cadre of free-trade Republicans, used that reality to grow support for the TPP among businesses and agricultural interests eager to grab a better foothold in a fast-growing area of the world where the U.S. has few formal trade deals.

But through the slow churn of negotiations, the dazzlingly complex deal among 12 countries soon fell victim to time and circumstance. After more than five years of talks, bleary-eyed trade negotiators were finally able to close the deal at an Atlanta hotel on October 5, 2015. But the agreement quickly became mired in election politics. Labor unions and blue-collar voters declared it to be a successor to NAFTA, which was blamed for the loss of factories. And while the U.S. trade commission predicted the deal would be broadly beneficial to the overall economy, some areas including food and agriculture were predicted to score more gains than others.

Even as supporters of the deal insisted it would put U.S. manufacturers on a stronger footing versus overseas competitors by enforcing higher labor and environmental standards, Trump and Bernie Sanders used anti-TPP fervor as a key plank of their campaign platforms, declaring that it would cost America jobs. Even Hillary Clinton, normally a supporter of freer trade, turned on the deal, saying she wanted to negotiate better terms.

Trump escalated his rhetoric on trade after the primaries and Congress, which has final say on trade deals, shied away from bringing TPP up for a vote. After Trump’s victory, the fate of the deal in the GOP-controlled Congress was all but sealed as Republican lawmakers put it aside to concentrate on tax reform and a bid to roll back Obamacare.

On his first full day in office, Trump signed an executive order withdrawing from the TPP, calling the action a “great thing for the American worker.”

“The Trans-Pacific Partnership is another disaster done and pushed by special interests who want to rape our country, just a continuing rape of our country,” Trump said during a campaign stop in Ohio. “That’s what it is, too. It’s a harsh word: It’s a rape of our country.” . . .

But even as Iowa was voting for Trump by 51 percent-42 percent, its farmers were looking to Asia as their savior. . . .

But despite Trump’s intense personal interest in trade, the White House has been slow to build the dream team of negotiators the president promised on the campaign trail. Lighthizer, who once served as a deputy U.S. trade representative under President Ronald Reagan, was confirmed on May 11. The people tapped to serve in the agency’s three deputy positions await confirmation, as does the administration’s pick for chief agriculture negotiator.

Iowa’s Republican Sen. Chuck Grassley says he thinks a trade deal with Japan would make up for much that was lost for agriculture by dropping TPP, but it will take “a lot more personnel, a lot more time to get it done, a lot more separate actions by Congress.”

As far as the administration’s strategy to get there, Grassley, who still owns his farm in Butler County, Iowa, said he hasn’t gotten much direction.

“I asked Lighthizer maybe a month ago in a meeting, and I didn’t get an answer,” Grassley said in a recent interview. “In a sense he answered, but not very definitively because their policy isn’t established.” . . .

Maybe the lesson of TPP demise for the protectionist firebreathers is be careful what you wish for.  The negative ramifications of not doing the TPP appear to be infinitely higher than doing the trade deal.

NAFTA NEGOTIATIONS

On August 16th, United States, Canada and Mexico sat down together for the first round of talks to formally reopen NAFTA.  On July 17th, the USTR released its attached “Summary of Objectives for the NAFTA Renegotiation”, USTR NAFTA RENGOTIATION OBJECTIVES.

But Trump keeps stirring the pot with his anti-NAFTA rhetoric. On August 22nd, during a speech in Phoenix President Trump announced that he might simply cancel NAFTA.

As Politico stated on August 23rd, “Trump’s  threat  of  NAFTA  withdrawal lose its edge”:

“Canada and Mexico appear to have reached a conclusion that when President Donald Trump threatens to withdraw from NAFTA, it is a negotiating ploy that is all bark and no bite. . . .

Instead, concerns were raised from within the United States government, where officials and lawmakers who support the deal see little value in the president repeatedly going to the well of harsh rhetoric in a way that makes the United States’ negotiating position more difficult.

“I don’t know a single person with a working brain cell that thinks that’s a good idea,” said one U.S. government source close to the talks, referring to renewing the threat of terminating the deal. “It’s a stupid message to send during the  negotiations.”

Part of the reason Mexico and Canada might be less intimidated by Trump’s bluster is that they have plenty of other trading partners to fall back on if the relationship with the U.S. sours. Both countries have separate deals in place with the European Union — Mexico is currently ramping up talks to update theirs — and both are part of the effort to reboot the Trans-Pacific Partnership, which the remaining 11 members are pushing toward completion even without the U.S.

But after Trump cast aside the TPP almost immediately upon taking office, the U.S. has fewer such options to fall back on — so pro-NAFTA lawmakers and those from export- dependent states have repeatedly urged him to focus on modernizing and updating NAFTA, rather than terminating it.

House Ways and Means Chairman Kevin Brady — whose home state of Texas counts Mexico as the No. 1 market for its exports, followed by Canada — cautioned Trump on Wednesday to be more aware of the effects his words have on the country’s trade relationships.

“The president’s rhetoric is red-hot, and it creates real impact,” Brady said during a town hall discussion at AT&T headquarters in Dallas. “I think the rhetoric, the words from the president matter, so I’d like to see that take a different approach in tone.”

Brady, whose powerful committee oversees trade on Capitol Hill, is one of a core group of Republicans whose support will be crucial if the administration succeeds in renegotiating a new deal with Canada and Mexico, since it will likely have to go through Congress for approval . . ..

The political question is whether Trump would discard NAFTA in the face of what certainly would be fierce resistance from Congress and industries like agriculture, which would take a significant hit in that event amid a sustained downturn in the farm economy.

Back in April, intense lobbying from the Hill and on the farm helped talk Trump down from inking a prepared executive order to withdraw from the deal. News of the planned order sparked such a public outcry and flurry of reaction in support of the deal that business and trade insiders sometimes refer to it as “Black Wednesday.” . . .”

Meanwhile, a chorus of industries are telling the Administration not to be so tough in the NAFTA negotiations because tweaks are fine, but the failure of the NAFTA deal would be disastrous to US industry and US agriculture.  On August 10th Automobile and Auto Parts makers urged the Administration to cool down the rhetoric on rules of origin for automobiles and auto parts because major changes to automobile rules of origin through NAFTA modernization could have the unintended consequence of making North America’s auto industry less competitive.  As Charles Uthus, vice president of international policy at the American Automotive Policy Council, the main lobbying arm of U.S. auto companies in Washington, stated:

“It’s the highest automotive rule of origin anywhere that you can find. It’s already extremely rigorous, very difficult to meet as it is. To actually strengthen it, there is a huge risk of unintended consequences.”

Ann Wilson, senior vice president of government affairs for MEMA, stated:

“Our members really struggle with finding a connection between changing the rules of origin and the reshoring of jobs. They do not see that connection.”

On August 17th Politico reported that Trump’s tough rhetoric has created intense hatred in Mexico, which will make it politically very difficult for Mexico to make concessions or agree to a deal that would clearly benefit the US.  Thus, Mexican President Enrique Peña Nieto is not afraid to walk away from the table if needed, potentially overturning the entire U.S.-Mexico bilateral trade relationship in the process.

Again, Trump does not understand the dynamics of the deal and the fact that since Mexico has more trade agreements than the US, it has leverage and is not afraid to walk away from the table.

Thus, both Mexico and Canada are resisting US pressure for a new “national content” provision in NAFTA’s auto trade rules to encourage more parts to be made in the United States.  As Mexican Economy Minister Ildefonso Guajardo stated:

“It will not be best practice to introduce that kind of rigidities into the industrial process.  It’s not good for American companies. It’s not good for Mexican companies.”

Canadian Foreign Minister Chrystia Freeland also stated: “Canada is not in favor of specific national content in rules of origin”.

Meanwhile, the Canadian Dairy Producers stated that they will fight any U.S. effort to duplicate in NAFTA the dairy concessions secured through TPP negotiations. As Yves Leduc, director of policy and international trade for the Dairy Farmers of Canada, stated, “Not a possibility – as far as we are concerned, we would never agree to that.”

The small amount of dairy access that Canada granted the U.S. during the TPP talks – equal to 3.25 percent of Canada’s domestic milk production – was balanced out by concessions Canada secured in negotiations involving all of the 11 other countries. Those circumstances don’t apply to NAFTA, which involves only three countries. As Leduc stated, “To ask us to open up our market to allow more subsidized goods from the U.S. to enter the Canadian market, the answer is simple: It’s no.”

Meanwhile, US famers joined with Canadian and Mexican farmers to urge US negotiators to not let specific demands undermine the market access US farmers and ranchers enjoy under the existing agreement.  Although all three groups want to lower trade barriers to exports and imports, it was their unified position to defend existing market access that was most notable, given the fear on the farm that Trump could use agriculture as a bargaining chip to satisfy his obsession with reducing America’s trade deficit in manufactured goods.

THE PHRASE “FREE BUT FAIR TRADE” IS A FRAUD BECAUSE COMMERCE HAS SO DEFINED DUMPING AS TO FIND ALMOST EVERY IMPORT DUMPED

In an article along the same lines as the Bannon article and the Trump quote, on August 1, 2017, Commerce Secretary Wibur Ross penned an article in the Wall Street Journal entitled, “Free Trade Is a Two Way Street”.  In the article, Commerce Secretary Ross argued that many countries erect barriers to US exports, but then went on to state:

“Both China and Europe also bankroll their exports through grants, low-cost loans, energy subsidies, special value-added tax refunds, and below-market real-estate sales and leases, among other means. Comparable levels of government support do not exist in the U.S. If these countries really are free traders, why do they have such formidable tariff and nontariff barriers?

Until we make better deals with our trading partners, we will never know precisely how much of our deficit in goods is due to such trickery. But there can be no question that these barriers are responsible for a significant portion of our current trade imbalance.

China is not a market economy. The Chinese government creates national champions and takes other actions that significantly distort markets. Responding to such actions with trade remedies is not protectionist. In fact, the World Trade Organization specifically permits its members to take action when other countries are subsidizing, dumping and engaging in other unfair trade practices.

Consistent with WTO rules, the U.S. has since Jan. 20 brought 54 trade-remedy actions— antidumping and countervailing duty investigations—compared with 40 brought during the same period last year. The U.S. currently has 403 outstanding orders against 42 countries.

But unfortunately, in its annual reports, the WTO consistently casts the increase of trade enforcement cases as evidence of protectionism by the countries lodging the complaints. Apparently, the possibility never occurs to the WTO that there are more trade cases because there are more trade abuses.

The WTO should protect free and fair trade among nations, not attack those trade remedies necessary to ensure a level playing field. Defending U.S. workers and businesses against this onslaught should not be mislabeled as protectionism. Insisting on fair trade is the best way to ensure the long-term strength of the international trading system.

The Trump administration believes in free and fair trade and will use every available tool to counter the protectionism of those who pledge allegiance to free trade while violating its core principles. The U.S. is working to restore a level playing field, and under President Trump’s leadership, we will do so.

This is a true free-trade agenda.”

Let me begin by saying no one has a problem with US government actions challenging foreign, including Chinese, barriers to US exports.  Every Administration be it Republican or Democrat has taken a tough stance to drop foreign barriers to US exports.  In fact, many Senators and Congressmen are pressuring the Trump Administration for more free trade agreements because they remove barriers to US exports.  The TPP, Trans Pacific Partnership, would have dropped tariffs down to 0 on more than 18,000 products exported by US companies, many agricultural products.

Although no one doubts that the Chinese market is significantly distorted, many foreign markets and in some cases US markets are significantly distorted.  The US steel market with the many outstanding trade orders blocking steel imports is a good example of a significantly distorted market in which the US price for steel is much higher than the World market price.

Also no one doubts that many countries subsidize their exports or dump in the US market.  For many years, the Commerce Department was able to find very high dumping rates on Japanese imports in antidumping cases by using price to price comparisons, which found that Japanese prices were significantly higher, sometimes four times higher, than US prices for the same Japanese product.  That is classic dumping using higher prices in the home market to fuel lower prices to the United States.

The Japanese companies were able to use dumping because the Japanese Government erected non-tariff trade barriers to block imports from the US and other countries creating very high domestic Japanese prices.  To protect its mikan /tangerine industry, for example, for many years Japan blocked all imports of citrus fruit.  But it is also interesting to note that there are no outstanding countervailing duty/anti-subsidy orders against Japanese products.

The Chinese governments, especially the local governments, also subsidize their exports and provide low interest loans to their companies, but so does the US government, through its subsidies in the Agriculture area, and the State Governments, which will waive state income taxes or help with low interest loans, to encourage production of companies, such as Foxconn, to move to their states.

But the US Countervailing Duty law applies to China now and the Commerce Department has not been shy in finding Chinese imports into the United States to be subsidized.  It should be noted, that the WTO has overturned 28 US Countervailing Duty cases against China, in part, because the WTO has ruled that Chinese state-owned companies are not necessarily the Chinese government itself, as the Commerce Department has ruled.

The US too has state-owned companies, such as the Tennessee Valley Authority, which provides electricity to certain parts of the US.  Should foreign governments assume that all electricity from the TVA is subsidized because it is owned by the US government?

The major problem, however, is the Commerce Department’s application of the antidumping law.

In the 1980s, James Bovard authored a book called the “Fair Trade Fraud”, which outlined many of these same problems in the US antidumping law.  But nothing has changed.  Instead Commerce has just developed new methodologies to increase antidumping rates even higher.

Moreover, the same economic warfare arguments were made about Japan in the 1980s.  Although China does not have clean hands, that does not mean that every single import from China is unfairly traded.  In fact, I would argue that a significant percentage, if not the majority, of imports from China are fairly traded.  The Chinese government simply does not care about the Chinese Mushroom, Honey, Crawfish or Shrimp industries and does not set the prices for those products or any of the inputs.  Does the Chinese government really care about the price of cow manure in China, a major input for mushrooms?

Remember Commerce over decades has so distorted the US antidumping law that it finds dumping in 100% of the cases from China because it refuses to look at actual prices and costs in China.  If you have a hanging judge, does that mean every single import from China is dumped/unfairly traded?

Instead, Commerce should start easing the restrictions on the market economy status of China so as to determine which Chinese companies are truly dumping in the US market and nail them to the wall.  Commerce should make its antidumping cases against China mirror actual reality in China, not for the Chinese companies, but for US importers and downstream customers.

Right now, because of its refusal to use actual prices and costs in China, neither Donald Trump, nor Wilbur Ross nor the Commerce Department know which Chinese companies are truly dumping and which Chinese companies are not.  Until Commerce starts uses actual prices and costs in China, no one will know which Chinese company is truly dumping,

Finally, the Commerce Department decision to tilt the playing ground and find dumping in every antidumping and countervailing duty case against China and also against almost all every other foreign county has created a situation so that the public perception is that almost every import into the US is dumped.  These hanging judge decisions fuel the protectionist/isolationist political rhetoric in the United States badly damaging US industry and agriculture.  It has also led to a mentality by many US companies of international trade victimhood.  We poor US companies simply cannot compete in the international or US market because all foreign exports and US imports are subsidized or dumped.

Instead, US companies want to rely on US government issued protectionist walls to protect themselves from competition rather than finding a way to make the US companies competitive again.  See the article on Trade Adjustment Assistance for Companies below.

SECTION 232 STEEL AND ALUMINUM CASES STALLED

The Section 232 Steel and Aluminum cases continue to be stalled.  On August 21ST,  Politico reported:

“WHITHER THE NATIONAL SECURITY STEEL INVESTIGATION? White House chief strategist Steve Bannon’s departure from the White House . . tipped the balance of Trump’s economic advisers firmly toward the more centrist “globalist” wing – and that could mean that two reports examining whether to limit imports of steel and aluminum for national security reasons could be indefinitely delayed. The Commerce Department has prepared a report on its findings that is circulating among agencies, but the administration has decided to dial down the investigations as it turns its attention to tax reform . . . .

Part of the reason is the departure of Bannon, who had been a major proponent of the move. But the decision to put off the investigations was also made in part because of opposition from business groups and Republican lawmakers who were worried it would hurt steel users and the broader economy, the news report said. .

Although President Donald Trump and Commerce Secretary Wilbur Ross thought they had found a panacea, cure all, for US trade problems, using Section 232 National Security cases to put large tariffs and/or quotas on Steel, Aluminum and other raw material products, something happened on the way to the Trump trade heaven—reality.  The major problem is that the steel industry has only 141,000 jobs at stake while downstream steel users have millions of jobs at stake.

As background, on April 20, 2017, President Trump and the Commerce Department in a press announcement and fact sheet along with a Federal Register notice, Presidential Memorandum Prioritizes Commerce Steel Investigation _ Department of Commerce Section 232 Investigation on the Effect of Imports of Steel on U.S COMMERCE FED REG SECTION 232 NOTICE, announced the self-initiation of a Section 232 National Security case against imports of steel from every country.  See video of Trump signing the Executive Order with Secretary Ross and Steel Producers at https://www.youtube.com/watch?v=EiVfNOl-_Ho.

Commerce held a hearing on May 24th in this case.  The video of the hearing can be found at https://www.commerce.gov/file/public-hearing-section-232-investigation-steel-imports-national-security.

In the past Secretary Ross has stated that the Section 232 case is meant to fill the gaps created by the patchwork of antidumping and countervailing duties on foreign steel, which he said have provided only limited relief to the U.S. industry.

Under the terms of the executive order, an interagency group will present a report to the White House within 270 days that identifies goods that are essential for national security and analyzes the ability of the defense industrial base to produce those goods.

If the Secretary reports affirmatively, the President has 90 days to determine whether it concurs with the Secretary’s determination and “determine the nature and duration of the action that, in the judgment of the President, must be taken to adjust the imports of the article and its derivatives so that such imports will not threaten to impair the national security.”

Although Commerce Secretary Wilbur Ross pledged to get the Section 232 Steel and Aluminum reports to President Trump’s desk by the end of June, that did not happen as the Administration began to realize the impact a broad tariff on steel or aluminum raw material inputs would have on downstream steel and aluminum users, which are dependent on high quality, competitively priced steel products to produce competitive downstream products made from steel and aluminum.

In response to the delay in the Section 232 Steel case, American steel industry executives appealed directly to President Donald Trump for immediate import restrictions because steel imports have surged back to 2015 levels.  As the letter states:

“The need for action is urgent. Since the 232 investigation was announced in April, imports have continued to surge.  Immediate action must meaningfully adjust imports to restore healthy levels of capacity utilization and profitability to the domestic industry over a sustained period.”

The American Iron and Steel Institute (AISI), an industry trade group, reported on Wednesday that total steel imports through July this year were up 22 percent from the same period a year ago, with imports taking 28 percent of the U.S.  market.

In the letter, Steel company executives from Nucor Corp., U.S.  Steel, ArcelorMittal and Commercial Metals Co. said the sustained surge of steel imports into the United States had “hollowed out” much of the domestic steel industry and was threatening its ability to meet national security needs.

“Your leadership in finding a solution to the crisis facing the steel industry is badly needed now. Only you can authorize actions that can solve this crisis and we are asking for your immediate assistance.”

The collateral damage to the many US producers that produce downstream steel products created by any across the board tariffs on steel imports makes it very difficult for the Administration to use a broad brush to fix the steel problem.  That is the problem with purely protectionist decisions.  They distort the US market and simply transfer the problems of the steel industry to other downstream industries.

But does that mean the US government should simply let the US Steel industry and other manufacturing industries die?  The election of Donald Trump indicates  politically that simply is not a viable option.

Although Joseph Schumpeter in his book Capitalism, Socialism and Demcracy coined the term “creative destructionism”, which conservatives and libertarians love to quote, they do not acknowledge the real premise of Schumpeter’s book that capitalism by itself could not long survive.  Schumpeter himself observed the collateral damage created by pure capitalism.

So what can be done for the steel and other manufacturing industries?  Answer work with the companies on an individual basis to help them adjust to import competition and compete in the markets as they exist today.  Moreover, there is already a government program, which can serve as a model to provide such a service—the Trade Adjustment Assistance for Companies Program.

What is the TAA for Companies secret sauce?  Making US companies competitive again.  Only by making US manufacturing companies competitive again will the trade problems really be solved.  US industry needs to stop wallowing in international trade victimhood and cure its own ills first before always blaming the foreigners.  That is exactly what TAA for Companies does—helps US companies cure their own ills first by making them competitive again.

TRADE ADJUSTMENT ASSISTANCE FOR FIRMS/COMPANIES – A BETTER ALTERNATIVE TRADE REMEDY WHICH ACTUALLY WORKS

As stated above, there is another more productive way to solve the Steel crisis and fix the trade problem and help US companies, including Steel and other companies, adjust to import competition.  This program has a true track record of saving US companies injured by imports.

The Trade Adjustment Assistance for Firms/Companies program does not put up barriers to imports.  Instead the TAA for Companies program works with US companies injured by imports on an individual basis to make them more competitive.  The objective of TAA for Companies is to save the company and by saving the company it saves the jobs that go with that company.

But as stated in the video below, for companies to succeed they must first give up the mentality of international trade victimhood.

In contrast to TAA for workers, TAAF or TAA for Companies is provided by the Economic Development Administration at the Commerce Department to help companies adjust to import competition before there is a massive lay-off or closure.  Yet the program does not interfere in the market or restrict imports in any way.

Moreover, the Federal government saves money because if the company is saved, the jobs are saved and there are fewer workers to retrain and the saved company and workers end up paying taxes at all levels of government rather than being a drain on the Treasury.  To retrain the worker for a new job, the average cost per job is $5,000.  To save the company and the jobs that go with it in the TAA for Companies program, the average cost per job is $1,000.

Moreover, TAA for Firms/Companies works.  In the Northwest, where I am located, the Northwest Trade Adjustment Assistance Center, http://www.nwtaac.org/, has been able to save 80% of the companies that entered the program since 1984. The Mid-Atlantic Trade Adjustment Assistance Center, http://www.mataac.org, uses a video, http://mataac.org/howitworks/, to show in detail how the program resulted in significant turnarounds for four companies. The reason the TAA for Firms/Companies is so successful—Its flexibility in working with companies on an individual basis to come up with a specific adjustment plan to make them competitive once again in the US market as it exists today.  For a sample recovery plan, see http://mataac.org/documents/2014/06/sample-adjustment-plan.pdf, which has been developed specific to the strengths, weaknesses and threats each company faces.

But TAA for Companies has been cut to the bone.  On August 22, 2017, in the attached press release, US Commerce Department Announces $13.3 Million to Boost Competitiveness of US Ma, the U.S. Commerce Department announced $13.3 Million to Boost Competitiveness of U.S. Manufacturers.  The press release specifically stated:

“WASHINGTON – U.S. Secretary of Commerce Wilbur Ross today announced $13.3 million in U.S. Economic Development Administration (EDA) grants to support 11 Trade Adjustment Assistance Centers (TAACs) in California, Colorado, Georgia, Illinois, Massachusetts, Michigan, Missouri, New York, Pennsylvania, Texas, and Washington that help manufacturers affected by imports adjust to increasing global competition and create jobs.

“The Trump administration is working every day to help America’s manufacturers, their workers, and their communities,” said Secretary Ross. “This funding is one element of a government-wide effort to restore American jobs and strengthen U.S. manufacturing.”

The 11 grants include:

$1.7 million to the University of Michigan, Ann Arbor, for the Great Lakes Trade Adjustment Assistance Center

$1.2 million to the Mid-Atlantic Employers’ Association, King of Prussia, Pennsylvania, for the Mid-Atlantic Trade Adjustment Assistance  Center

$978,000 to the New England Trade Adjustment Assistance Center, Inc., North Billerica, Massachusetts

$1.1 million to the Research Foundation, State University of New York Binghamton, for the New York, New Jersey and Puerto Rico Trade Adjustment Assistance Center

$1.2 million to the University of Colorado at Boulder for the Rocky Mountain Trade Adjustment Assistance Center . . .

$1 million to the University of Missouri–Columbia for the Mid-America Trade Adjustment Assistance Center …

$1.2 million to the Trade Task Group, Seattle, Washington, for the Northwest Trade Adjustment Assistance Center…

EDA’s Trade Adjustment Assistance for Firms program funds 11 Trade Adjustment Assistance Centers across the nation. The centers support a wide range of technical, planning, and business recovery projects that help companies and the communities that depend on them adapt to international competition and diversify their economies.  . . .

The mission of the U.S. Economic Development Administration (EDA) is to lead the federal economic development agenda by promoting competitiveness and preparing the nation’s regions for growth and success in the worldwide economy.”  . . .

Are such paltry sums really going to help solve the manufacturing crisis in the Steel and other industries?  Of course not!!

But when the program was originally set up, the budget was much larger at $50 to $100 million.  If the program was funded to its full potential, yes steel companies and other companies could be saved.

To those libertarian conservatives that reject such a program as interference in the market, my response is that this program was personally approved by your icon, President Ronald Reagan.  He understood that there was a price for free trade and avoiding protectionism and that is helping those companies injured by import competition.  But teaching companies how to be competitive is a much bigger bang for the buck than simply retraining workers.  And yes companies can learn and be competitive again in the US and other markets.

In the attached article entitled “Steel Competitiveness Seriously?”, Steel Competitiveness, William J. Bujalos, the head of the Mid-Atlantic Trade Adjustment Assistance Center,  makes the proposal to expand the program to help large manufacturing companies, including steel producers.  Mr. Bujalos states:

“Current reports suggest that the nation’s steel industry is experiencing a rebound – a rebound driven by a growing collective confidence about America’s economic future.

That’s all good but irrelevant because confidence is not a strategy for growing the nation’s global competitiveness. What is relevant is the extent to which our companies are able to grow other much more important things, like metrics critical to their competitive success. Do that and the power of any confidence index won’t matter.

Let me explain. Since 1998 I have been leading the nation’s Trade Adjustment Assistance for Firms (TAAF) program in the Mid-Atlantic region. My business experience during the last 50 years has yielded insight into the kinds of things that have the highest probability for success at reversing an enterprise’s negative fortunes irrespective of the competitive battlespace that they’ve chosen to play in. Prior lives involved corporate management in both private and public sectors (large and small companies) in a wide variety of markets that included: management consulting, chemicals, plastics, medical devices, pharmaceuticals, automotive systems, battery tech and steel – and I’ve learned that there are some things that are universal …

For example, I’m a believer that, for businesses of all stripes, there is only one true asset to be quantified and listed on the Balance Sheet – knowledge. Nothing else really matters at the end of the day. And the overarching value of TAAF is that it is this nation’s singularly effective business model that injects it directly into a company’s bloodstream over an extended period of time, i.e. half a decade. That sort of holistic, long-term approach yields the biggest chance for success because it has a high probability of permanently upgrading a company’s core DNA.

In my view steel companies don’t operate in markets that are fundamentally any different from markets in general. No markets are forgiving. No customer base is loyal. Some players don’t play fair. No amount of investment is worth it if indigenous leadership is of poor quality. So as a direct consequence, all companies that are serious about permanently enhancing their global competitiveness must achieve mastery over stuff like: competitive intelligence, customer intelligence, market dynamics intelligence, costs/managerial finance, talent/leadership development, product development, planning effectiveness, etc., etc., etc.

In other words: it’s the knowledge stuff that’s critical and little else. And in my humble opinion, focusing the attributes that TAAF brings to the table on that industry on a larger scale would yield stunning results.

The TAAF business model places its nationwide network of Trade Adjustment Centers (i.e. TAACs) in the unique position of being the right catalyst at the right place at the right time. Does it always work? Certainly not. What does? But it works better than just about anything else in America’s tool kit. It is unique. And here’s the kicker, we don’t ask for equity. On behalf of the American taxpayer we simply insist on pure, unadulterated, robust, and relentless commitment from the Chief Executive Officer down to the shop floor. Absent that? Well, it’s unfortunate but some companies probably should fail.

This approach really works, without costing a great deal of money or causing economic disruption while at the same time providing our political establishment the cover it needs to smooth passage of critical treaties – and, because a company must match our injection dollar-for-dollar throughout the process, the American taxpayer is assured of management’s total and focused commitment for one simple reason … they share in the risk!

Bottom line? The long-term holistic approach is effective. The business model, stipulating unique strategies addressing each company’s unique circumstances, is effective. The program’s neutral economic impact is effective. It’s ability to support passage of trade agreements while not impeding the benefits of free trade is effective. It’s ability to lessen the costs associated with the engagement of outside expertise to reengineer critical business processes is effective.

And I firmly believe that it’s application is not limited to America’s smallest makers – only its funding is. For several decades that’s been little more than an afterthought.

Consider …

  • All manufacturing companies were at one time small ones.
  • All manufacturing companies are impacted by globalization.
  • Small ones need outside expertise to teach them basic stuff.
  • Larger ones need outside expertise to teach them sophisticated stuff.
  • Small makers, because they’re learning the basics and have little resources to tap, take a longer time to turn the corner.
  • Larger makers, because the basics are already inculcated and they have the requisite resources at hand, can turn the corner at much higher speed.
  • And if you were the Chief Executive of a tier-one domestic manufacturer, would you doubt for a minute –
    • That your supply chain probably has several thousand companies in it?
    • That extensive improvement in their performance would have a significantly positive impact on your performance?
  • Improvement in the performance of the small cohort will increase the probability that fewer will fail because a greater proportion will grow into larger ones – driving concomitant growth in good-paying manufacturing jobs and the creation of wealth. Go ahead. Beat that with a stick!”

For those who would simply dismiss the idea as impossible and too simplistic, watch the video.  The program works.  See http://mataac.org/howitworks/.

TRUMP AND CHINA

SECTION 301 CASE AGAINST CHINA ON FORCED TECHNOLOGY TRANSFERS MOVES FORWARD

In an attached August 18th Federal Register notice based on an August 14th Presidential Memorandum, 301 INITIATION NOTICE Presidential Memorandum for the United States Trade Representative whitehouseg, President Trump pulled the trigger on the Section 301 Intellection property case against China.  The Section 301 investigation could take a year and probably will lead to negotiations with the Chinese government on technology transfer.  If the negotiations fail, the US could take unilateral action, such as increasing tariffs, or pursue a case through the World Trade Organization.  Unilateral actions under Section 301, however, also risk a WTO case against the United States in Geneva.

The notice states that the USTR will specifically investigate the following specific types of conduct:

“First, the Chinese government reportedly uses a variety of tools, including opaque and discretionary administrative approval processes, joint venture requirements, foreign equity limitations, procurements, and other mechanisms to regulate or intervene in U.S. companies’ operations in China, in order to require or pressure the transfer of technologies and intellectual property to Chinese companies. Moreover, many U.S. companies report facing vague and unwritten rules, as well as local rules that diverge from national ones, which are applied in a selective and non-transparent manner by Chinese government officials to pressure technology transfer.

Second, the Chinese government’s acts, policies and practices reportedly deprive U.S. companies of the ability to set market-based terms in licensing and other technology-related negotiations with Chinese companies and undermine U.S. companies’ control over their technology in China. For example, the Regulations on Technology Import and Export Administration mandate particular terms for indemnities and ownership of technology improvements for imported technology, and other measures also impose non-market terms in licensing and technology contracts.

Third, the Chinese government reportedly directs and/or unfairly facilitates the systematic investment in, and/or acquisition of, U.S. companies and assets by Chinese companies to obtain cutting-edge technologies and intellectual property and generate large-scale technology transfer in industries deemed important by Chinese government industrial plans.

Fourth, the investigation will consider whether the Chinese government is conducting or supporting unauthorized intrusions into U.S. commercial computer networks or cyber-enabled theft of intellectual property, trade secrets, or confidential business information, and whether this conduct harms U.S. companies or provides competitive advantages to Chinese companies or commercial sectors.”

The United States Trade Representative (“USTR”) will hold a hearing on October 10th at the International Trade Commission and public comments are to be submitted by September 28th.

In an August 30, 2017 article by Dan Harris, who heads my law firm, on his China law blog at http://www.chinalawblog.com/2017/08/china-us-trade-wars-and-the-ip-elephant-in-the-room.html, entitled “China-US Trade Wars and the IP Elephant in the Room”, Dan states that in over one hundred negotiations with Chinese companies, he has not seem the Chinese government demand IP rights.  What he has seen is bad negotiating:

“I have been called by reporters at least a half dozen times in the last couple of weeks regarding the Trump Administration’s planned investigation of China’s IP practices. But what I tell these reporters fits so badly with THE narrative that my name is not showing up in print. Sorry, but I can’t help it.

Here’s the situation. The Trump Administration is claiming that China’s government forces American companies to relinquish its IP to China and my problem is that despite my firm having worked on literally hundreds of China transactions that involve IP, I have very little proof of this. So no real story there.

Here though is the story as seen from my eyes and from the eyes of the China attorneys at my firm, readily conceding that we have not seen even close to everything.

We have never been involved in a China transaction where it has been clear to us that the Chinese government has forced our client to relinquish its IP to China. We have though been involved in a million transactions where the Chinese party on the other side — sometimes a State Owned Entity, but way more often not — has vigorously and aggressively sought to get our client to part with its IP for a very low price. Is the Chinese government behind this sort of pressure? Don’t know? Probably sometimes, but probably most of the time not. If the transaction involves rubber duckies, we can assume not. If it involves next generation computer chips, well that is probably a very different story.

Anyway, as we write on here so often, there are many terrible technology transfer and other sorts of IP deals to be had with Chinese companies and we have too often — even against our China attorneys’ clear counsel to our clients not to do it — seen our clients make bad deals that will involve them turning over their IP with little to no chance of receiving full value for it. But these companies have not been forced, not in the sense that any government was forcing them to do anything. These companies were simply willing to take huge risks either because they could not grasp the risks or because they felt they had no other choice for financial reasons.

In Three Myths of China Technology Transfers, we wrote about how our clients all too often forge ahead with bad deals and why, and we nowhere mention government compulsion:

A Chinese company that intends to violate a licensing agreement and run off with the foreign company’s IP will usually have a very clear plan. What the China lawyers in my office call the Standard Plan works as follows. First, the Chinese company will negotiate in a way that guarantees a weak license that cannot be enforced against them by the foreign party. The tricks used to do this are quite standardized. Second, the Chinese company will ensure that it does not make any (or else it makes very few) payments until after it has already received the technology. If the Chinese company makes any payment at all, it will make a minimal number of payments, usually late and in violation of the agreement and then once it has received enough of the technology it seeks, it will cease making any payments entirely.

When our China attorneys encounter a Chinese company clearly working on the Standard Plan, we warn our clients. However, it is also typical for our clients to nonetheless want to forge on ahead. The client will usually explain how their situation is unique and that means the Chinese could not possibly be planning to breach.

We discuss again in China Technology Transfers: The Relationship and Deal Structure Myths how it is that American companies lose their IP to Chinese companies and we again leave out government force:

Due to a partnership relationship, the foreign side often wrongly believes it is somehow better protected against IP theft. The foreign side then lets down its guard, only to learn that its China partner has appropriated its core technology. This sense of partnership is most common with SMEs and technology startups, especially those companies whose owner is directly involved in the relationship with the Chinese entity.

In China and The Internet of Things and How to Destroy Your Own Company I rant about technology companies that literally destroy themselves by failing to do enough to protect their IP from China:

Well for what it is worth, I will no longer describe technology companies as a whole as our dumbest clients when it comes to China. No, that honor now clearly belongs to a subset of technology companies: Internet of Things companies. And mind you, we love, love, love Internet of Things companies. For proof of this, just go to our recent post, China and the Internet of Things: A Love Story. Internet of Things (a/k/a IoT) companies are sprouting all over the place and they are booming. Most importantly for us, they need a ton of legal work because just about all IoT products are being made in China, more particularly, in Shenzhen. And just about all IoT products need a ton of complicated IP assistance.

So then why am I saying they are so dumb about China? Because they are relinquishing their intellectual property to Chinese companies more often, more wantonly, and more destructively than companies in any other industry I (or any of my firm’s other Chinese lawyers) have ever seen. Ever. And by a stunningly wide margin.

I then list out the following as “my prime example, taken from at least a half dozen real life examples in just the last few months”:

IoT Company: We just completed our Kickstarter (sometimes Indiegogo) campaign and we totally killed it and so now we are ready to get serious about protecting our IP in China.

One of our China Lawyers: Great. Where are you right now with China?

IoT Company: We have been working with a great company in Shenzhen. Together we are working on wrapping up the product and it should be ready in a few months.

China Lawyer: Okay. Do you have any sort of agreement with this Chinese company regarding your IP or production costs or anything else?

IoT Company: We have an MOU (Memorandum of Understanding) that talks about how we will cooperate. They’ve really been great. They have told us that they would enter into a contract with us whenever we are ready.

China Lawyer: Can you please send us the MOU? Have you talked about what that contract will say?

IoT Company: Sure, we can send the MOU. It’s one page. No, we haven’t really talked much beyond just what we need to do to get the product completed.

China Lawyer: Okay, we will look at your MOU and then get back to you with our thoughts.

Then, a day or two later we a conversation like the following ensues:

China Lawyer: We looked at your “MOU” and we have bad news for you. We think there is a very good chance a Chinese court would view that MOU as a contract. (For why we say this, check out Beware Of Being Burned By The China MOU/LOI) And the Chinese language portion of the MOU — which is all that a Chinese court will be considering — is very different from the English language portion. The Chinese language portion says that any IP the two of you develop (the IoT company and the Chinese manufacturer) belongs to the Chinese company. So what we see is that as things now stand, there is a very good chance the Chinese company owns your IP. This being the case, there is no point in our writing a Product Development Agreement because your Chinese manufacturer is not going to sign that.

IoT Company: (And I swear we get this sort of response at least 90 percent of the time) I’m not worried. I think you have it wrong. I’m sure that they will sign such an agreement because we orally agreed on this before we even started the project.

China Lawyer: That’s fine, but I still think it makes sense for you to at least make sure that the Chinese company will sign a new contract making clear that the IP associated with your product belongs to you, because if they won’t sign something that says that, there is no point in our drafting such a contract and, most importantly, there is no point in your paying us to do so.

So far not a single such IoT company has been able to come back to us with an agreement from their Chinese manufacturer to sign.

Again, no government force, just an overzealous and insufficiently careful foreign company.

Now before anyone excoriates me for ignoring reality, let me say that I have read about instances where the Chinese government has “forced” foreign companies to turn over their IP to China; high speed rail is an often cited example of that. And I do not doubt that it happens in critical industries (nuclear power would be another example). And I am also not unaware of how China is increasingly forcing foreign companies to store their data in China, which absolutely puts technology at risk. But even in these instances the foreign company has some choice. Not good choices, I know. And arguably it is no choice at all when the decision is between doing business in China or not. The last thing I want to do is get all philosophical on anyone regarding what constitutes choice so I will leave it to our individual readers to determine for themselves where on the continuum of force and choice they want to put any and all of the above.

There is plenty to complain about how China protects IP and there is plenty to complain about how China protects foreign companies that do business in China or with China, but I am just not sure complaining about forced IP transfers goes at the top of that list for most American companies. When I talk with American and European and Australian companies about China their biggest legal complaint is invariably how expensive it is for them to comply with China laws and how they resent that their Chinese competitors generally are not held to the same legal standards.

A couple of years ago, I gave the following testimony before The US-China Economic and Security Review Commission of the United States Congress:

I was introduced as an expert, and I’d like to qualify that by saying do not think of myself as an expert. I am just a private practice lawyer who represents American and Australian companies and some European and Canadian companies as well in China.

I’m going to tell you a little bit about what we do so you can get a little bit better perspective of where I’m coming from on this. The bulk of my firms’ clients are small and medium-size businesses, mostly American businesses, but some European and Australian and Canadian businesses as well. Most of them have revenues between 100 million and a billion a year. Our clients are mostly tech companies, manufacturing companies and service businesses.

About 20 percent of our work is for companies in the movie and entertainment industry. We have some clients in highly-regulated industries, like health care, senior care, banking, insurance, finance, telecom and mining, but those companies make up less than ten percent of our client base.

Most of the China work we do for our clients is relatively routine. We help them register as companies in China. We register their trademarks and copyrights in China. We draft their contracts with Chinese companies. We help them with their employment, tax and customs matters. We oversee their litigation in China, and we represent them in arbitrations in China. We help them buy Chinese companies.

For our clients, the big anti-foreign issue is whether they will be allowed to conduct business at all in China as that is certainly not always a given. Certain industries in China are shut off or limited to foreign businesses acting alone. For our clients, publishing and movies are most prominent.

Essentially anything that might allow for nongovernmental communication to or between Chinese citizens is problematic, but it is not clear to me that these limitations are intended to be anti-foreign, as China does not really want any private entities, foreign or Chinese, engaging in these activities without strict governmental oversight.

So do these limits against foreign companies arise from anti-foreign bias or just the Chinese government’s belief that it can better control Chinese companies? To our clients, that distinction doesn’t matter.

On day-to-day legal matters, our clients are almost invariably treated pursuant to law, and so long as they abide by the law, they seldom have any problems. The problem for our clients isn’t so much how the Chinese government treats them; it’s how they are treated as compared to their Chinese competitors who are less likely to abide by the laws and more likely to get away with it.

I have no statistics on this. I doubt there are any statistics on this, but I see it and I hear it all the time.

I see it when one of our clients buys a Chinese business that has half of its employees off the grid and has facilities that are not even close to being in compliance with use laws, and I know foreign companies cannot get away with that.

And I hear it from Chinese employees of our clients who insist that there is no need for our clients to follow various laws. They insist there is no need to follow various laws and to do so is stupid. Is this disparity due to anti-foreign bias or is it due to corruption? Again, for our clients, the answer is irrelevant.

Is the Trump administration’s IP investigation a negotiating ploy done as much to get at disparate treatment as it is to get at forced technology transfers? I do not think it is, but some who know more about such things tell me it may be.

CNN was the only one of the media companies that both interviewed me on the above issues and ended up quoting me and I like how it handled the issue in its article, President Trump is set to crank up the pressure on China over trade:

Beijing has other ways of getting its hands on valuable commercial information. Officials often insist on taking a close look at technology that foreign companies want to sell in China.

“Chinese government authorities jeopardize the value of trade secrets by demanding unnecessary disclosure of confidential information for product approvals,” the American Chamber of Commerce in China said in a report published in April.

Some experts say that handing over technology has effectively become a cost of doing business in China — a market too big for most companies to ignore.

“Many Chinese companies go after technology hard and the tactics they use show up again and again, leading us to believe there is some force (the government?) teaching them how to do these things,” said Dan Harris, a Seattle-based attorney who advises international companies on doing business in China.

“The thing is that the foreign companies that give up their technology usually do so at least somewhat of their own volition,” he told CNNMoney. “Yes, maybe they need to do so to get into China, but they also have the choice not to go into China, right?”

Closing the stable door?

Other analysts say that the U.S. administration is coming to the problem too late.

“Intellectual property (IP) theft is yesterday’s issue,” wrote Lewis of the Center for Strategic and International Studies.

“In part because of past technology transfer and in part because of heavy, sustained government investment in science and research, China has developed its own innovative capabilities,” he wrote.

“Creating new IP in the United States is more important than keeping IP from China.”

These are really complicated issues and I realize the above is more of a stream of consciousness “thoughts dump” than a coherent position paper. So more than ever, I’d love to hear your thoughts in the comments below.”

Dan’s point is that it is often bad negotiating tactics by the US side that leads to companies giving away their technology, not Chinese government pressure.

On August 15th, Investors Business Daily speculated that “Trump’s Trade War With China Is War On North Korea By Other Means” stating:

“But they [the Chinese government] may have underestimated Trump: He has the will, and likely the political support, for an even-more damaging war with China over trade. With the U.S. China’s largest market — in 2016, U.S. imports from China totaled nearly half a trillion dollars — a trade war is a serious threat to China, which is already showing signs of economic slowing.

That’s what’s behind Trump’s sudden decision to investigate China’s rampant theft of U.S. intellectual property. And on trade grounds only, Trump is right to investigate this, since it’s enshrined in both U.S. law and international trade treaties that egregious trade violations warrant retaliatory actions if the violations aren’t fixed.

The U.S. has been jawboning China on this for years, to no effect. China for years has seen the U.S. as a paper tiger, too feckless to act on its own behalf. Now, Trump is showing it otherwise. . .

Once again, Trump the savvy business negotiator seems to know his foe’s weak points.

Perhaps hoping to stall Trump’s trade action, China announced that it would cease North Korean imports of coal, iron and lead, and seafood, starting Sept. 5, in keeping with U.N. sanctions imposed on Kim Jong Un’s regime.

In a joint statement Monday, Secretary of State Rex Tillerson and National Security Advisor Gen. James Mattis made explicit the link between China, trade and North Korea: “China is North Korea’s neighbor, sole treaty ally and main commercial partner,” they wrote. “Chinese entities are, in one way or another, involved with roughly 90% of North Korean trade. This affords China an unparalleled opportunity to assert its influence with the regime.”

The clear message: If you support North Korea’s regime economically, we’ll hurt you economically in return. It’s a Trumpian twist on Von Clausewitz’s famous dictum about war and politics: “(A trade) war is the continuation of politics by other means.”

As we’ve said before, we take a back seat to no one in advocating on behalf of free trade. But when one side routinely and systematically steals hundreds of billions of dollars worth of intellectual property, that’s no longer free trade. It’s piracy. . . .

North Korea’s nuclear blackmail, aided by China’s patronage, is not acceptable. If it takes trade sanctions to get China’s diplomatic attention, so be it. It’s time that China’s charade over its support of North Korea comes to an end.”

On August 8th, in an article entitled “Second Thoughts on Trade with China” William Galston for the Wall Street Journal stated:

“It is China’s techno-nationalism that poses the greatest threat to our future. In 2006 the Chinese government adopted a long-term plan to promote what it called “indigenous innovation.” As James McGregor, a leading expert on the Chinese economy, writes, China’s leading-edge firms were directed to obtain technology from their multinational partners through “co-innovation and re-innovation based on the assimilation of imported technologies.”

In practice, this meant giving American firms an offer Don Corleone would have recognized—either to “share their technologies with Chinese competitors—or refuse and miss out on the world’s fastest-growing market.” China’s ultimate goal is to use forced technology transfer to replace the U.S. as the world’s leading economy. . . .

Existing legal tools may not suffice to end these discriminatory practices. Although the WTO prohibits mandatory technology transfers, the Chinese government’s position is that trading technology for market access is purely a business decision. Protectionist government purchases are a key part of China’s strategy. . . .

If turning over our technological crown jewels to a foreign power is against the national interest, then our government should have the power to prevent it. But wielding this power without blowing up the international trade regime will not be easy.”

On August 21st, in an editorial entitled “Yes, China Steals U.S. Intellectual Property, But That Doesn’t Mean Trade With China Is A Bad Thing” Investors Business Daily tempered its initial response on the Section 301 case stating:

“Everyone is angry at China right now, and perhaps with good reason. China’s regime often bends trade rules to its own needs, and breaks them or ignores them when it’s convenient. . . .

The U.S. shouldn’t tolerate cheating on trade, by China or anyone else. It’s a matter of jobs and income for Americans and the companies that employ them.

Even so, that doesn’t mean everything China has done has been bad for the U.S. Far from it.

A new study, ” How Did China’s WTO Entry Benefit U.S. Consumers?” from the prestigious National Bureau of Economic Research, shows why. It notes that from the time China joined the World Trade Organization in 2000 to 2006, the U.S. inflation index for factory goods fell an estimated 7.6%.

This might not sound like a lot, but it is. “The resulting savings were large,” the study says. “U.S. manufacturing sector production was valued at $4.5 trillion in 2014, so if prices had been 7.6% higher, that production would have cost $340 billion more.”

That is, profits for U.S. firms were likely billions of dollars higher over that six-year period than otherwise. And prices to American consumers fell.

How did this happen? The simple answer is freer trade. China cut its average tariff on manufacturing inputs from 15% in 2000 to 9% in 2006, a 40% reduction. Meanwhile, China’s government lifted export limits on its domestic companies, got rid of capital requirements, eased restrictions on foreign investment, raised its limits on textile exports and lowered the number of goods that required import licenses.

The result: China’s factory exports to the U.S. surged 290% from 2000 to 2006.

According to the study, “69% of the growth was driven by new exporters offering a widening variety of products, while 16% was created by incumbent firms exporting new products.”

The lower tariffs and other reductions in trade restrictions led to a Chinese   productivity boom, with an average 10% per year gain in productivity for Chinese companies that exported to the U.S. As for the price of U.S. manufactured goods, about two-thirds of the 7.6% reduction in factory prices here was due to China’s tariff cuts.

But didn’t the food of Chinese factory-made goods to the U.S. decimate American manufacturing during this period? That’s a myth. As the U.S. Federal Reserve’s monthly manufacturing index shows, from 2000 to 2006 American factory output rose a healthy 11.5%. It wasn’t decimated by the surge in Chinese exports to the U.S. It only crashed when the financial crisis hit.

For its part, China’s communist    government in the  early  2000s  found   that taking  its hands off  the economy’s windpipe and engaging with the rest of the world through trade was  an  effective  strategy for making its economy grow. We  also  benefited  from that.

Now the Trump administration is warning an increasingly hostile China that its recent trade violations aren’t acceptable. China, in response, has blasted the U.S. for its “protectionism.”

We hope a negotiated solution can be found. At the same time, we might want to think seriously about it before we back a giant U.S.-China trade war that could make all of us, Americans and Chinese, much worse off.”

In early 2000, China’s brilliant economic guru Premier Zhu Rongyi believed that China should join the WTO, not for the benefit of the United States or Europe, but for the benefit of China.  Premier Zhu realized that China would benefit from free trade by breaking down its own protectionist walls, which isolated China from the rest of the World.

It is somewhat ironic that the United States is apparently moving in the opposite direction, building protectionist walls to protect its companies from foreign competition.  Many US politicians have fallen into the trap of international trade victimhood because they simply do not understand the benefits of free trade to the United States.

SECTION 201 SOLAR CELLS CASE

On May 17, 2017, Suniva filed a Section 201 Escape Clause against all Solar Cell imports from all countries at the US International Trade Commission (“ITC”).  On May 23, 2017, in the attached Federal Register notice, ITC iNITIATION NOTICE SOLAR CELLS, the ITC decided to go ahead and institute the case.  If the ITC reaches an affirmative determination, within 60 days the President must decide whether or not to impose import relief, which can be in the form of increased tariffs, quotas or an orderly marketing agreements.

At the ITC, Section 201 cases are a two stage process.  The ITC must first determine whether “crystalline silicon photovoltaic (“CSPV”) cells (whether or not partially or fully assembled into other products) are being imported into the United States in such increased quantities as to be a substantial cause of serious injury, or the threat thereof, to the domestic industry producing an article like or directly competitive with the imported articles.”  The ITC has determined that the investigation is “extraordinarily complicated” and will make its injury determination within 128 days after the petition was filed, or by September 22, 2017. The Commission will submit to the President the report required under section 202(f) of the Act (19 U.S.C. § 2252(f)(1)) within 180 days after the date on which the petition was filed, or by November 13, 2017.

Prehearing briefs and posthearing briefs have been filed at the ITC and the ITC hearing was held on August 15th and was reportedly 11 hours long.

If the ITC reaches an affirmative determination, it will go into a remedy phase and the hearing in that phase will be on October 3, 2017. Attached is the ITC public prehearing staff report, 2017.08.01 ITC Solar 201 Prehearing Report PUB.

The Staff Report shows that imports are up, value of imports are down, but US producers’ production and capacity have increased during the period of investigation 2012-2016.  Moreover, US producers’ profits and sales have increased in the period.  This is a very mixed staff report with no clear trends and could lead to a negative ITC injury determination on September 22nd.

Meanwhile, sixteen US senators have urged the ITC to consider how the increased tariffs on foreign solar cells could hurt the broader domestic solar industry. The letter specifically stated:

“We respectfully request that the commission carefully consider the potential negative impact that the high tariffs and minimum prices requested would have on the tens of thousands of solar workers in our states and on the hundreds of companies that employ them.”

The letter was signed by Senators: Heinrich (D-N.M.), Tillis (R-N.C.), Bennet (D- Colo.), Feinstein (D-Calif.), Whitehouse (D-R.I.), Perdue (R-Ga.), Gardner (R-Colo.), Heller (R-Nev.), Van Hollen (D-Md.), Moran (R- Kan.), Scott (R-S.C.), Cardin (D-Md.), King (I-Maine), Collins (R-Maine), Markey (D-Mass.) and Cortez Masto (D-Nev.).

ALUMINUM EXTRUSIONS CIRCUMVENTION

On July 26, 2017, in the attached memorandum, prc-aluminum-extrusions-ar-072617, the Commerce Department published in the Federal Register a notice of affirmative final determination of circumvention of the antidumping and countervailing duty orders on aluminum extrusions from the People’s Republic of China. The Department determined that heat-treated extruded aluminum products that meet the chemical specifications for 5050 grade aluminum alloy, regardless of producer, exporter, or importer, constitute later-developed merchandise, are circumventing the orders.

As a result of the Department’s anti-circumvention determination, all heat-treated extruded aluminum products from the People’s Republic of China that meet the chemical specifications for 5050 grade aluminum alloy are considered to be in-scope merchandise and must be included in responses to the Department’s questionnaires.

FALSE CLAIMS ACT—FURNITURE

In a previous blog post,  I mentioned that the real hammer against transshipment of products to evade trade orders is not recent legislation from Congress, but the False Claims Act.  Under the False Claims Act, private parties can file suits in Federal District Court alleging fraud on the US government because of foreign exporters and US importers decision to use transshipment and other methods to evade US antidumping and countervailing duties.  Under the FCA, the relator can look back at 10 years of past imports and the antidumping duties in question can be over 100, 200 or even 300%.  Under the FCA the remedy is triple damages and when looking at imports over such a long period of time, the remedy can result in enormous payouts.

The private party files an FCA complaint as a relator on behalf of the US government.  The US government then decides whether or not to intervene in the case.  If the US government chooses to intervene, the relator is entitled to 15 to 25% of the recovery of the US government.  In one small FCA case here in Washington regarding medical bills, a clerk at a hospital received a payout of $2 to 3 million so anyone can be a relator.

More on point, In an intervention complaint, US GOVT INTERVENTION BLUE FURNITURE CASE, the US government intervened in a False Claims Act filed against evasion of millions of dollars in antidumping duties on imports of wooden bedroom furniture from China.

The lawsuit brought by University Loft Co., an Indiana-based wooden bedroom furniture company, accuses Florida-based Blue Furniture Solutions LLC, founder and president and its chief financial officer  of importing wooden bedroom furniture from China without paying the 216.01 percent anti-dumping rate by making false statements to U.S. Customs and Border Protection (“CBP”).

In doing so, Blue Furniture escaped paying millions of dollars in duties and fees owed to the federal government from 2011 through 2015, the suit says.

The complaint states:

“To avoid the payment of anti-dumping duties and fees, defendants conspired with their Chinese manufacturers and exporters to fraudulently avoid customs duties and underpay fees owed to the United States by making false representations in entry documents about the nature and value of the imported merchandise.”

Specifically, the complaint states that Blue Furniture falsely identified its entries to Customs and Border Protection with codes and descriptions for merchandise that are not subject to antidumping duties.  But the complaint states that many of the wooden chests, dressers, nightstands, wardrobes and many of the beds imported were subject to antidumping duties.

In addition, the FCA complaint accuses the Florida-based company of instructing its China-based manufacturers and exporters how to mislabel and misclassify the merchandise on documents to be shown to CBP.

NEW TRADE CASES

ANTIDUMPING AND COUNTERVAILING DUTY CASES

STAINLESS STEEL FLANGES FROM CHINA

On August 16, 2017, the Coalition of American Flange Producers and its individual members, Core Pipe Products, Inc., and Maass Flange Corporation filed new antidumping and countervailing duty cases against imports of Stainless Steel Flanges from China and India.

FOREIGN ANTIDUMPING AND COUNTERVAILING DUTY LAW AND CASES

UNIVERSAL TRADE WAR CONTINUES

CHINA AD/CVD NEWSLETTERS

Attached are newsletters from Chinese lawyer Roland Zhu and his trade group at the Allbright Law Office about Chinese trade law. Team’s newsletter-EN Vol.2017.30 Team’s newsletter-EN Vol.2017.32 Team’s newsletter-EN Vol.2017.33.

SECTION 337 AND IP CASES

NEW 337 CASES AGAINST CHINA

WI-FI ENABLED ELECTRONIC DEVICES

On August 29, 2017, Sharp Corporation and Sharp Electronics Corporation filed a section 337 case against imports of Wi-Fi Enabled Electronic Devices.  The respondent companies named in the complaint are:

Hisense Co., Ltd., China; Hisense Electronic, Co., Ltd., China; Hisense International (Hong Kong) Co. Ltd., Hong Kong; Hisense USA Corporation, Suwanee, Georgia; Hisense Electronics Manufacturing Company of America Corporation, Suwanee, Georgia; Hisense USA Multimedia R&D Center, Inc., Suwanee, Georgia; and Hisense Inc., Huntington Beach, California.

If you have any questions about these cases or about Trump and Trade, including the impact on agriculture, the impact on downstream industries, the Section 232 and 301 cases, the 201 case against Solar Cells, US trade policy, the antidumping or countervailing duty law, trade adjustment assistance, customs, False Claims Act or 337 IP/patent law, please feel free to contact me.

Best regards,

Bill Perry

US CHINA TRADE WAR–TRUMP REAGAN TRADE DIFFERENCE SECTION 232 STEEL USERS 201 SOLAR NEW TRADE CASES BORDER ADJUSTMENT TAXES NAFTA

TRADE IS A TWO WAY STREET

“PROTECTIONISM BECOMES DESTRUCTIONISM; IT COSTS JOBS”

PRESIDENT RONALD REAGAN, JUNE 28, 1986

US CHINA TRADE WAR JUNE 16, 2017

Dear Friends,

Trump’s trade war on downstream industries continues with exhibit number 1 being the Section 232 Steel case.  As indicated below, numerous comments were filed May 31st by downstream steel users saying that tariffs on steel imports will devastate their business and cost millions of jobs.

But the question is whether anyone is listening.  Commerce is rushing to turn out the Section 232 report by the end of June.  But it has received numerous comments, but many of those comments are only a few pages long.  The hearing itself limited testimony from each company to 10 minutes each.

When the US International Trade Commission (“ITC”) conducts a injury investigation in steel cases, it sends out numerous multiple page questionnaires to US Steel Producers, US importers, foreign producers and even US purchasers.  In addition to those questionnaire responses, it will often have prehearing and posthearing briefs that are many pages long.  In the recent Cold-Drawn Mechanical Tubing case, for example, we filed a brief that was over 200 pages long.

Now all Commerce Secretary Ross will have is the arguments of the US Steel industry and no in depth data regarding what the impact of these trade restraints will have on downstream users.

Moreover, there is a rush to judgement in the Section 232 cases.  In the ongoing Solar Cells section 201 case, which is comparable to the Section 232 case, the ITC will take 6 months to make its injury determination, 2 months to make a remedy determination.  The ITC will hold two hearings, send out numerous questionnaires and large briefs will be filed.  Not in the Section 232 case, which is only 2 months long.

Although the Section 232 Steel report is due at the end of June, President Trump is stating that the Aluminum Section 232 Steel report should come out at the end of June when the hearing is on June 22nd and comments are not due to June 30.  This is truly a rush to judgement without due regard to the impact on downstream users.

As indicated below, on trade President Trump and President Ronald Reagan are diametric opposites, and Reagan understood that protecting one industry hurts other industries.

Meanwhile, new antidumping and countervailing duty cases have been filed against Fine Denier Polyester Staple Fiber and Citric Acid and ITC and Commerce deadlines are very, very strict.  Also Commerce has ruled Aluminum Pallets are in the Aluminum Extrusions case.

The Section 201 case against imports of solar cells from every country continues.  Border Adjustment taxes are still an issue and NAFTA negotiations will start up, but Trump has told Lighthizer to do no harm to agriculture, which is going to be difficult to pull off.

Again, maybe this is why Trade Adjustment Assistance to Companies is so important.

If anyone has any questions or wants additional information, please feel free to contact me at my e-mail address bill@harrisbricken.com.

Best regards,

Bill Perry

TRUMP’S TRADE WAR

Trump’s trade war continues as downstream steel user industries finally wake up to the damage they could face.  In the Section 232 case, on May 31st, numerous downstream industries from automobiles, equipment manufacturers, forging industry, industrial fasteners, motor and equipment manufacturers, electrical machinery manufacturers, transformers, heavy trucks, and other companies that use steel products filed short public comments stating cutting off their steel raw materials would devastate their companies.

But Trump himself cannot wait to impose tariffs.  On June 8, 2017, Politico reported that:

President Donald Trump appears to be champing at the bit to impose steel import restrictions under a national security probe being conducted by the Commerce Department. In a speech Wednesday in Cincinnati, Trump indicated major action was coming quickly and that it could affect countries besides China, which is often blamed for creating a global steel glut.

“Wait until you see what I’m going to do for steel and for your steel companies,” Trump said. “We’re going to stop the dumping, and stop all of these wonderful other countries from coming in and killing our companies and our workers. You’ll be seeing that very soon. The steel folks are going to be very happy.”

But big US steel consumers, like machinery, auto, energy, including oil and natural gas, are not going to be happy and are extremely worried that Trump’s trade action will damage their US industries and cause companies to close costing millions of jobs.  In Trump’s desire to move quickly to protect the steel industry, he could well damage many other US industries in the process.  This has happened before and likely will happen again.

As the National Foreign Trade Council, which represents more than 200 companies, stated in its public 232 comments filed at the Commerce Department on May 31, 2017:

In considering whether to impose restrictions on steel imports for national security reasons, it is important to keep in mind two important facts about those industries that rely on steel as a key input to their production. First, steel-consuming companies producing goods in the U.S. account for a vastly greater share of total manufacturing output and employment than does the domestic steel industry itself. The U.S.- based auto and auto parts industry employs over 800,000 production workers, more than four times as many as are employed by U.S. steel producers. The construction industry, which accounts for a majority of all steel consumption, employs nearly 8 million production workers. Many other steel-consuming sectors have larger employment than the steel sector.

Secondly, many steel-consuming companies are also major suppliers for our nation’s defense-related needs, building the ships, aircraft, machinery, high technology weapons and other goods that a modern military demands. Therefore, these downstream industries are critical to the U.S. industrial capacity and the nation’s security is weakened if the production capacity of these industries is curtailed.  Because of these two factors – employment effects and national security needs – it is of utmost importance to weigh carefully the potential effects of higher steel tariffs or restrictive quotas on these steel-consuming sectors.

On June 14th Politico reported that Congress is now getting concerned about the impact of the Section 232 case and that Trump administration officials will hold staff-level briefings with the Senate Finance and House Ways and Means committees on June 16th to lay out the context and process for an investigation into the national security threats of steel imports

Apparently, Commerce Department officials are still debating what products should be covered and from where.  One question is whether semi- finished steel, imported and fabricated into various products, should be exempt.

The big question still at issue — what is the magnitude of the national security concern? Disagreement among top White House officials could be partly to blame for slowing the report. Some in the Trump administration see the threat extending all the way to steel used in infrastructure projects while others see it limited strictly to steel used in the defense-industrial base.

Another question is whether to give a pass to steel imports from Canada and Mexico under certain circumstances.  There’s also statutory authority for treating Canada as a defense partner, which could eliminate any consideration of imports from north of the border as a threat to national security.

Politico reports that the Commerce Department is expected to present three options to the President:

  • A 25 percent tariff that would apply to any steel imports that fall in the scope of the investigation. The tariff would also apply to all existing anti-dumping and countervailing duty orders.
  • A tariff-rate quota that would hit imports with a tariff once they exceed a certain volume. There is also discussion of an alternative that would apply tariffs if imports dip below a certain price, but there is concern that Commerce or USTR may not have the resources to set up a sophisticated system to monitor prices across a range of steel
  • A straight quota that would apply strict limits on imports of certain types of steel products from certain countries.

Politico also indicated another concern whether Commerce and USTR have the manpower to effectively implement and administer any of these trade actions? Sources said that concern is one element driving the debate over what specific trade action to take.

Chairman Kevin Brady of House Ways and Means also expressed his concern with the Section 232 case at The Wall Street Journal’s annual CFO conference, stating:

“Any administration has to be careful in its assessment and its implementation of those provisions.  Done incorrectly, it can send a very protectionist signal to other countries to do the same. It is a tool that has to be wielded very carefully.”

Chairman Brady should be concerned because of the strong possibility of retaliation.  As the US Wheat Associates stated in their May 31st comments to the Commerce Department:

Wheat is often viewed as an import sensitive industry in many countries that are export destinations for U.S. farmers. Before taking action under Section 232, the Department of Commerce should consider the fallout if other countries follow suit and impose restrictions on U.S. wheat or other products as a result of their own national security concerns, whether real or imagined.

U.S. Wheat Associates is extremely concerned about the potential ramifications of import protections based on national security arguments. Under the 1994 General Agreement on Tariffs and Trade (GATT) Article XXI, national security can be a legitimate reason to restrict trade, but this has been rarely cited for very good reason: Article XXI is the Pandora’s Box of the GATT. If it is opened for our import sensitive industries, the results could be devastating.

Outside of a few obvious, generally uncontested areas, such as trade in weapons and nuclear material, most trade in goods are not considered national security issues because the implications are enormous. Steel and aluminum are undoubtedly import sensitive products. But the Department of Commerce should think very carefully about the potential consequences of declaring steel and aluminum imports to be national security concerns.

The U.S. wheat industry is highly dependent on exports, with roughly half of U.S. wheat production exported each year on average. .  . However, anytime a trade restriction is put in place, there is the potential for it to be applied to U.S. exports in response, particularly if trade restrictions are imposed outside the World Trade Organization (WTO) dispute settlement system. . . .

U.S. farmers also rely on international commitments made by countries in the WTO and other trade agreements to keep markets open. However, not every country abides by those rules, and a radical shift by the United States in its respect for trade commitments could give effective ammunition to those who seek to stop or slow food imports under the guise of national security. . . .

As indicated further below, when it comes to trade, people need to understand that Donald Trump and Ronald Regan are 180 degrees, diametrically opposite.  Reagan was a true free trade, but President Trump is a protectionist.  Although his protectionist rhetoric is probably a very good reason for his election victory, especially as it relates to trade agreements, such as TPP and NAFTA, the problem with protectionism is the collateral damage to other US industries.  When one wants to protect raw material industries very quickly with not enough time to consider the full impact of a protectionist action, the collateral damage on other US industries can truly be devastating.  The protectionist cure can be much worse than the trade disease.  Not only in Steel, but also aluminum.

TRUMP’S TRADE WAR ON DOWNSTREAM INDUSTRIES—SECTION 232 STEEL CASE

The real impact of the Trump Steel War on downstream industries is illustrated in spades by the public comments in the Section 232 Steel case by steel consuming industries.  As stated in the last blog post, in response to pressure from President Trump, Commerce Secretary Ross has self-initiated National Security cases under Section 232 of the Trade Expansion Act of 1962, 19 U.S.C. 1862, against imports of steel and aluminum, which go directly into downstream US production.  The danger of these cases is that there is no check on Presidential power if the Commerce Department finds that steel or aluminum “is being imported into the United States in such quantities or under such circumstances as to threaten to impair the national security, the Secretary shall so advise the President”.  The Secretary shall also advise the President on potential remedies.

If the Secretary reports affirmatively, the President has 90 days to determine whether it concurs with the Secretary’s determination and “determine the nature and duration of the action that, in the judgment of the President, must be taken to adjust the imports of the article and its derivatives so that such imports will not threaten to impair the national security.”

Once the President makes his affirmative determination, he will report his decision to Congress, but it is questionable whether Congress can disapprove the decision.   The statute also does not provide for any appeal to the Court of International Trade.  Commerce also is very protectionist and in antidumping and countervailing duty cases.  The only check is the injury determination by the independent US International Trade Commission.  There is no such determination under Section 232.

STEEL

On April 20, 2017, President Trump and the Commerce Department in the attached press announcement and fact sheet along with a Federal Register notice, Presidential Memorandum Prioritizes Commerce Steel Investigation _ Department of Commerce Section 232 Investigation on the Effect of Imports of Steel on U.S COMMERCE FED REG SECTION 232 NOTICE, announced the self-initiation of a Section 232 National Security case against imports of steel from every country.  See video of Trump signing the Executive Order with Secretary Ross and Steel Producers at https://www.youtube.com/watch?v=EiVfNOl-_Ho.

Commerce held a hearing on May 24th in this case.  The video of the hearing can be found at https://www.commerce.gov/file/public-hearing-section-232-investigation-steel-imports-national-security.

Although Section 232 investigations usually take 6 months, at the hearing, Ross stated that a written report would go to the President by the end of June in less than two months.  At the start of the hearing, Commerce Secretary Wilbur Ross said something has to be done to help the Steel producers.  In the past Secretary Ross has stated that the Section 232 case is meant to fill the gaps created by the patchwork of antidumping and countervailing duties on foreign steel, which he said have provided only limited relief to the U.S. industry.

On May 31, 2017, public comments were filed at the Commerce Department on the Section 232 Steel case.  These are some of the comments by the Downstream Steel Users.

AMERICAN AUTOMOTIVE POLICY COUNCIL (AAPC)

The AAPC represents the common public policy interests of its member companies – FCA US, Ford Motor Company and General Motors Company, and states the following in its May 31st comments:

Although sympathetic to the challenges the steel industry faces, we are concerned that if, as a result of this Section 232 investigation, the President were to increase tariffs on foreign steel or impose other import restrictions, the auto industry and the U.S. workers that the industry employs would be adversely affected and that this unintended negative impact would exceed the benefit provided to the steel industry from this Executive action.

Steel is a critical input into the manufacture of automotive products. The price of steel in the United States is already significantly higher than in the markets where our competitors build the majority of their cars and trucks.  This puts U.S. automakers at a competitive disadvantage.

Inevitably, the imposition of across the board higher tariffs or other restrictions on imports of steel into the United States would only widen the existing price gap by increasing the price of U.S. steel and thus the cost of U.S.-built vehicles. Additionally, outside of the United States, the price of steel will fall further, giving foreign automakers an additional cost advantage over the U.S. auto industry.

As a result of such a Section 232 remedy, sales of domestically-built cars and trucks would fall, auto exports would shrink, and American auto sector jobs would be lost. In the end, this contraction could actually reduce the amount of U.S. steel consumed by U.S. automakers, jeopardizing the very industry the remedy was intended to assist. . . .

The U.S. automotive industry makes significant contributions to the U.S. economy, with FCA US, Ford Motor Company and General Motors Company representing the majority of the following 2016 economic contributions.

  • Directly employing/supporting more than 7.3 million American jobs- including manufacturers of auto parts, steel, glass, plastics, rubber and semi-conductors;
  • Exporting $137 billion in vehicles and parts, more than any other U.S. industry sector;
  • Manufacturing 12.2 million cars & trucks;
  • Representing 8% of the manufacturing sector’s contribution to GDP on a value added basis;
  • Investing $8 billion in U.S. plants/equipment, and nearly $20 billion in R&D; and
  • Selling a record 17.5 million cars and light

 The AAPC concludes:

While we strongly support the Administration’s focus on ensuring that our trading partners live up to their commitments and abide by their trade-related obligations, actions taken as a result of this Section 232 investigation to restrict imports of steel, in order to support the U.S. steel industry, could have unintended negative consequences for the domestic automotive industry and the millions of American workers it directly and indirectly employs.

Any such restrictions that this Administration might implement would lead to an increase in the price of U.S. steel and depress the price of steel in foreign markets. This would lead to lower sales of domestically-built cars and trucks in the highly competitive U.S. auto market, a decrease in U.S. auto exports, and a loss of the jobs that those economic activities support. In the end, that would be a net-negative for the U.S. economy, and potentially the U.S. steel industry – the very sector such restrictions were designed to assist.

ASSOCIATION OF EQUIPMENT MANUFACTURERS (“AEM”)

AEM Represents 950 member companies that manufacture equipment and provide services for the construction, agriculture, utilities and mining sectors worldwide.  These manufacturers represent 1.3 million Americans, contribute $159 billion to the U.S. economy and raise over $25 billion in federal and state taxes each year.  As AEM states in its comments:

Manufacturing equipment in America frequently requires the sourcing of steel products  from around the world. While manufacturers in the United States often procure steel from domestic suppliers, they at times must source steel from international producers because the steel’s formula matches a specific spec required to ensure a piece of equipment’s proper function and performance that is not otherwise available in the United States. Inhibiting access to foreign steel will force manufacturers to procure steel from a domestic supplier that may not match required specifications, thus degrading the quality and performance of the equipment and risking operational safety concerns.  In cases where a particular type of steel is available from domestic suppliers, a sudden surge in demand will likely lead to extended procurement timeframes and delays in the manufacturing process.

Restricting the import of foreign steel will also ultimately have a very negative impact on the manufacturing competitiveness of the United States as domestic steel prices rise, and global steel prices fall when steel originally destined for the US enters global markets. With nearly 30 percent of equipment manufactured in the U.S. designated for export, U.S. manufactured exports will become uncompetitive in many global markets if manufacturers are forced to pay higher prices for necessary steel inputs. In addition, restricting raw material imports hurts American jobs by driving up the costs of value-added manufacturing in the U.S.  Furthermore, imported manufactured equipment will become much more competitive in the U.S. market as foreign manufacturers are able to produce and sell equipment at a much lower price by leveraging global steel markets.

CATO INSTITUTE—FORMER ITC COMMISSIONER DAN PEARSON

Former ITC Commissioner Dan Pearson presently at the Cato Institute made the following points:

First, the 232 investigation must be understood in the context of the existing U.S. steel marketplace. Roughly 200 antidumping or countervailing duty measures already are in place on steel products from a variety of countries. Steel currently is one of the most protected sectors in the U.S. economy.  . . .

Third, any further import restrictions would do far more harm to steel-using manufacturers than any benefit that could be provided to steel mills. That is simply due to the raw numbers. Steel mills employ just 140,000 workers.  Downstream manufacturers that use steel as an input employ 6.5 million, 46 times more. Steel mills account for a fairly small slice of the overall U.S. economy.  The $36 billion in economic value added by steel mills in 2015 equals only 0.2 percent of U.S. Gross Domestic Product (GDP). By contrast, the economic value added by firms that use steel as an input was $1.04 trillion – 29 times more – or 5.8 percent of GDP.

Any government action to drive up steel prices by restricting imports will hurt steel-consuming manufacturers by artificially increasing their steel costs and reducing their competitiveness relative to companies overseas. It’s clear that the broad public would be harmed by additional steel import restrictions. A decline in U.S. economic welfare is not something the administration ought to pursue. It’s very difficult to have a stronger national defense when the economy is getting weaker.

FORGING INDUSTRY ASSOCIATION

The Forging Industry Association (FIA) is the Association representing the US forging industry.  The Comments state:

In 2016, custom forgings accounted for nearly $10.5 billion of sales in North America. An additional $3-5 billion in catalog and captive sales would bring the industry total for 2016 to the $13.5 – 15.5 billion range. The North American forging industry is comprised of nearly 500 forging operations in 38 states, Canada and Mexico, with the largest US presence of forging operations located in Ohio (79), Pennsylvania  (63), Illinois (54), Michigan (54), California (38), Texas (41), New York (16), Indiana (18), Wisconsin (17), Kentucky (13), Massachusetts (10), and South Carolina (9). . . .These operations provide more than 36,000 well-paid jobs and benefits.

As noted above, the steel forging industry supplies many products essential to national security, including numerous tank and automotive forgings for combat vehicles, small caliber weapons forgings, ordnance forgings, and forgings used in building airplanes, helicopters, ships and submarines. . . .

US steel forgers rely almost exclusively on domestically-produced SBQ steel. SBQ is specialty steel long products made to customer specifications suited for forging into the final product. Because it is heavy, bulky and expensive to ship long distances, the forging industry depends upon a healthy, competitive domestic SBQ steel industry to provide necessary raw material at globally competitive prices for steel forging here in the U.S. The “globally competitive prices” are critically important – if the price for domestic SBQ steel is higher in the U.S. than anywhere else in the world due to tariffs or trade restrictions, then we begin to see less imports of raw material and more imports of downstream products.

The US steel forging industry relies heavily on 6 domestic SBQ steel producers with mills in multiple locations. SBQ steel imports accounted for 15% of the consumption in 2016, and domestic consumption was 4 million tons of SBQ steel, while SBQ imports totaled only 600,000 tons.  This import volume has remained relatively flat over the past few years. . . . Generally speaking, we do not believe the SBQ steel industry has been adversely affected by steel imports. The domestic SBQ steel market is currently running close to capacity, and producers recently announced substantial price increases.

While SBQ raw material import penetration has been relatively insignificant, the import of steel forgings has grown significantly and at an ever increasing rate, threatening the health and viability of the domestic steel forging industry.   . . .

In effect, when current trade laws are used to remedy injury in one subsector of the economy, such as steel, they often shift the injury to another tier within the manufacturing sector.

INDUSTRIAL FASTENER INSTITUTE (“IFI”)

The IFI represents approximately 85% of fastener production capacity in North America, and there are few, if any, products used in the pursuit of national security that do not contain fasteners.

In its comments, the IFI stated:

In 2015, the U.S. fastener industry accounted for $13.4 billion (of a $69.6 billion global market), and is projected to grow +2.6% per year to roughly $15 billion by 2020. In the U.S., the fastener industry employs approximately 42,000 people at about 850 different manufacturing facilities.  . . ..

The fastener industry is critical to all segments of our manufacturing industrial base, including the defense industry.  .

Fastener manufacturing is a major consumer of metals, including steel. Since fasteners can be made anywhere in the world, the U.S. industry is dependent on access to adequate supplies of globally priced raw materials such as steel to remain globally competitive. . .  .

However, even with a healthy domestic industry, history has shown that fastener manufacturers must sometimes import raw material because the particular types of steel needed are not available in the quantities, quality or form required. (Fasteners are made out of round form, not sheet, flat or bar products.) By some accounts, the U.S. steel industry is able to produce only about 70 percent of the total steel consumed in the U.S. . . .

No one disputes that unfair trade exists, and that trade remedy laws can be a useful tool to combat it when it occurs. However, while the trade remedy laws can provide some protection for domestic metals producers, they are a double-edged sword for downstream users such as fastener manufacturers, who may be negatively impacted by higher raw material costs and may not be able to fully utilize the trade remedy laws themselves. In particular, downstream users of products subject to trade remedies have no standing under U.S. law to participate in the process that may lead to the imposition of duties on those products.  In addition, these downstream users are likely to be smaller companies who do not have the financial resources to pursue trade cases, which can cost millions of dollars to fully prosecute.

The fastener industry has experienced this scenario many times, where efforts to protect a basic raw material segment of the economy create unintended consequences throughout the rest of the economy. The most recent example occurred in 2002, when President Bush, at the urging of the U.S. steel industry concerned about a surge of imports, imposed 30% tariffs on nearly all imported steel under a Global Safeguard action. The impact on steel consuming industries was immediate and devastating. The evidence of harm to the broad economy grew quickly, leading President Bush to terminate the Global Safeguard order after only eighteen months instead of the full three years, but by then 1.3 million manufacturing jobs in steel consuming and related industries had been lost.

The fastener industry not only understands the need to ensure that the U.S. has the necessary industrial capacity to provide for our national defense needs, we are a vital part of that very capacity. To be frank, steel is a commodity until somebody makes it into a part/end item. We are concerned that the proposed 232 investigation will not give proper consideration to the importance of downstream industries to that industrial capacity.

MOTOR & EQUIPMENT MANUFACTURERS ASSOCIATION (MEMA)

MEMA represents 1,000 vehicle suppliers that manufacture and remanufacture components and systems for use in passenger cars and heavy trucks providing original equipment (OE) to new vehicles as well as aftermarket parts to service, maintain and repair over 260 million vehicles on the road today. In its comments, the MEMA stated:

the total employment impact of the motor vehicle parts manufacturing industry is 4.26 million jobs. Nearly $435 billion in economic contribution to the U.S. GDP is generated by the motor vehicle parts manufacturers and its supported activity. In total, motor vehicle parts suppliers contribute more than 77 percent of the value in today’s vehicles. .

Free and fair trade is imperative for a strong domestic supplier industry. Disruption to supply chains or increases in production costs will not contribute to the national security of the United States.

Our industry is closely associated with the U.S. defense industry.  . . . Adjustments to steel imports that prevent our members from obtaining the type of steel they need in a timely manner or increases to production costs would jeopardize our ability to manufacture in the United States and to provide these critical products to the U.S. defense industry.

Adjustments to steel imports will adversely impact MEMA member companies by disrupting U.S. manufacturing operations and increasing costs. Suppliers expect adjustments to steel imports to cause job losses due to a decrease in production if steel is not available in a timely manner or the costs of production increase. Adjustments to steel imports would also be likely to decrease overall U.S. production because production of the downstream products using steel subject to such adjustments would move abroad.

Member companies would have to compete with those finished goods imports, which likely would take market share from MEMA member companies. Finally, other countries may retaliate against the U.S. for imposing such restrictions by imposing their own restrictions, which could detrimentally impact exports of MEMA member companies.

MEMA member companies need specialized steel that either is not available at all in the U.S. or is not available in sufficient quantities. Certain foreign steel producers worked closely with MEMA member companies to develop the specialized steel and this type of collaboration benefits the U.S. by improving products. Continued access to these types of steel are critical to our industry. Attached to these comments is a non-exhaustive list of steel products that must be excluded from any import adjustments (see Appendix I). Several of our member companies are submitting exclusion requests directly as well. . . .

Motor vehicle component and systems manufacturers are the largest employers of manufacturing jobs in the U.S. and many of these companies import steel of all types, including specialized steel products, to manufacture goods in the U.S. that are then sold to the U.S. defense industry, U.S. government and consumers. Disrupting American manufacturing operations or increasing costs through adjustments to steel imports would not benefit the national security of the United States. Such adjustments to steel imports would, in fact, detrimentally impact U.S. employment, compromising our economic and national security.

NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)

NEMA represents nearly 350 electrical and medical imaging manufacturers and stated in its comments:

Our combined industries account for more than 400,000 American jobs and more than 7,000 facilities across the U.S. Domestic production exceeds $117 billion per year and exports top $50 billion.

Many NEMA member companies import specific types of steel from abroad for their U.S. manufacturing operations. Accordingly, NEMA urges the Administration to refrain from recommending or pursuing measures to adjust imports of fairly-traded electrical steel.

Power and distribution transformers are essential components of the U.S. electrical grid. Grain oriented electrical steel (GOES) can be the most expensive material used in the manufacture of transformers as the steel core is a very large percentage of the overall cost of a transformer, more than 50% in some cases. GOES is also the most important material in terms of quality and performance of a transformer. . .  .

Some electrical steels are imported into the U.S. because they are not available from domestic or North American suppliers. Loss of access to these materials would cause grave harm to NEMA manufacturers, who would no longer be able to manufacture and supply DOE-compliant products, and their customers – which include U.S. electric utilities as well as tens of thousands of industrial, commercial, and defense/national security facilities – but would have no effect on domestic or North American steel manufacturers, since they do not manufacture/produce or offer for sale those materials today.

The significant anti-dumping and countervailing duties in place have effectively eliminated supply from the seven largest NOES-producing countries. There is only one North American producer of NOES, who is effectively petitioning the government to become a protected monopoly.

If access to NOES were to be restricted further based on this Section 232 investigation, U.S. production of finished goods would face even greater pressure to move outside the United States.

U.S. motor manufacturers should not be forced by government policy to purchase from only a single U.S. monopoly supplier.

U.S. electrical manufacturers compete in a global market. Measures to restrict or block access by U.S. finished-product manufacturing operations to fairly-traded essential materials will harm domestic manufacturing and high-paying manufacturing jobs, and national and economic security. It would be patently unacceptable and un-American for the U.S. government to prevent U.S. manufacturers to mitigate supply chain risks through the use of a diversity of suppliers of fairly-traded materials.

Similarly, suggestions that the federal government should place restrictions, on national security grounds, on the importation of fairly-traded components and finished goods could not be more misguided. If products are entering the U.S. at less than fair value and causing injury to a domestic industry producing like products, then U.S. trade remedy laws are in place to address such situations. Steel manufacturers/producers do not have standing to call for restrictions on fairly-traded imports of products that they do not manufacture; therefore motors, transformers and steel cores (regardless of size) should not be part of this Section 232 discussion.

Many commentators, including US Auto Parts companies, requested exclusion of their specific type of imported steel because the US steel producers could not produce the specific type of steel used to make the downstream products.

BORG WARNER

In its comments, Borg Warner, a large US auto parts company, first listed 18 different specific types of steel and parts produced from that steel and went on to state:

The list above is crucial to our U.S-manufactured products that require types of specialty steel that are not available domestically. The products we make with these specialty materials provide key essential vehicle propulsion technologies for improving fuel-efficiency, emissions, and performance. These technologies are critical in helping automakers meet federal regulations for Corporate Average Fuel (CAFE) standards and achieving better overall environmental conditions.

These technologies take many years to refine and often require specialized materials in its engineering and production. We have worked closely with these specialty steel suppliers to develop our products to ensure quality and affordability for our customers and consumers. Any major changes to our supply chain could hurt our engineering and manufacturing processes, delay production, and or jeopardize our ability to meet the vehicle production demands of the industry. If these steel exclusions are not granted, the cost of these types of products would increase and ultimately be passed onto the consumers in the overall price of the vehicle. Most importantly, a major shift in steel supply could hurt U.S. vehicle sales and therefore negatively impact U.S. automotive manufacturing jobs.

BSH HOME APPLIANCE

In its comments, BSH states that it manufactures appliances sold under the Bosch, Thermador and Gaggenau names at factories in North Carolina and Tennessee, with warehouses, sales offices and show rooms throughout the United States.  BSH further states in its comments:

If the Department decides that some steel is being imported into the United States in such quantities or under such circumstances as to threaten or impair the national security, BSH requests that steel used for home appliances—light gauge sheet metal, galvanized pre-painted steel, and light gauge stainless steel—be exempt from that determination. . . .

Steel is one of the main materials used by home appliance manufacturers in the construction of their products. In particular, home appliance manufacturers typically use light gauge sheet metal, galvanized pre-painted steel, and light gauge stainless steel in the construction of their products. These materials are critical to the design, function, and durability of home appliances and, should the Department decide to recommend action, we ask that the steel used for home appliances be exempt.

First, we are concerned that any action to ban or limit the quantity of steel imported into the United States will overly burden U.S. steel capacity. U.S. steel capacity is insufficient to meet the demands of industry, including the home appliance industry. Were steel to become more difficult to source, it would hamper the industry’s ability to deliver products to consumers. In addition, some manufactures use specialty steel that is simply not available in the U.S. and must be sourced internationally.

Second, foreign competition in the steel industry improves the welfare of the home appliance industry, which is a low margin business. Competition between U.S. steel producers and international steel producers results in lower steel prices. Without this competitive pricing, it is likely that the home appliance industry could become less competitive and/or, in some cases, would need to pass price increases onto consumers.

Moreover, an action to impose a ban or limit on the quantity of steel imported into the United States or a tariff on steel imports is a disincentive to manufacture home appliances in the United States. It is likely that, in response to such actions, companies producing products domestically would be at a disadvantage compared to products produced internationally. Thus, limits on imported steel and/or tariffs on imported steel could result in companies deciding to produce home appliances outside of the United States in an effort to avoid higher steel prices or the unavailability of domestic steel. . . .

The Department and the President must ensure that in assisting one industry, they do not negatively impact others.

BUSINESS AND INSTITUTIONAL FURNITURE MANUFACTURERS ASSOCIATION (“BIFMA”)

BIFMA is the trade association for business and institutional furniture producers and is the Association for the commercial furniture industry.  BIFMA stated in its May 31st comments:

It is difficult to imagine how it is in our national security or national economic interests to impose tariffs or quotas that risk thousands of jobs in steel-consuming industries. Disregarding or discounting the economic impact of adjustments on consuming industries could have serious and unintended consequences. We urge the Department to refrain from, or carefully limit, any import adjustment recommendations.

Any adjustment to steel imports is likely to increase steel prices domestically. Adjustments that restrict supply and increase costs domestically will cause significant, negative financial consequences for companies. A sudden increase in material costs would be extremely detrimental for our members and the customers that they supply . . . . We urge the Department to take into consideration the serious ramifications to steel- consuming manufacturers while considering any recommendation it may make to the President.

STEEL BUILDING AND CONSTRUCTION COMPANIES

In its May 31st comments, more than ten steel building and construction companies stated:

Our companies produce building materials, such as prefabricated building sections, roofs, etc. from galvalume and galvanized steel coils.  Our companies are very concerned about the threat to our company’s future if the imports of flat rolled galvalume steel we rely on are restricted by additional tariffs or quotas. Only a few American mills produce galvalume at all; those mills are not interested in selling this at a competitive price to most users. There also are not enough mills producing this product to satisfy demand. Only certain selected customers are able get pricing at competitive levels. Without access to imported galvalume, our ability to compete will be reduced or eliminated.

American national security is not threatened by imports of galvalume. Not only are coated products not used in defense applications; most American mils are profitable, to the extent that they are expanding their coated steel operations, not reducing them.  . .

We urge you to not restrict the steel imports that are vital to our survival.

TRANSFORMER MANUFACTURERS

Several transformer manufacturers stated in their comments:

The proposal made in oral comments that the Department initiate remedies on the import of electrical grade steel, including GOES, deeply troubles the Transformer Manufacturers. This proposal presumes that the importation of GOES or cut steel for use in power transformers is a threat the national security. We propose that protecting the interests of the domestic transformer manufacturers and their employees is more vital to national security than the risk associated with importing GOES, which only accounts for a portion of the total market. One thing is certain of the proposal if adopted as recommended, it will severely damage the domestic transformer marketplace, the underlying companies and their United States employees. . . .

Simply put, at present there is no other domestic alternative to AK Steel as a source of GOES. Granting its requested relief will, in effect, further entrench a domestic de facto monopoly for GOES. While each of the below entities wants to continue to work with AK Steel and maintain positive commercial relationships, the potential economic impact of an unrestricted sole-source domestic provider could be devastating on the domestic transformer manufacturing industry.

TRUCK AND ENGINE MANUFACTURERS ASSOCIATION

EMA represents the world’s leading manufacturers of heavy- duty commercial vehicles, as well as the world’s leading manufacturers of the internal combustion engines that power the vehicles and equipment used in virtually all applications other than passenger cars and aircraft.  In its comments EMA stated:

members maintain significant manufacturing operations in the United States that employ tens of thousands of workers engaged in the manufacture of, among other things: trucks, buses, heavy-duty pickups and vans, construction and agricultural equipment, mining equipment, law and garden equipment, along with the wide array of internal combustion engines that power those myriad applications, as well as the engines that power locomotives and marine vessels. All of those very significant and vital manufacturing operations – operations that quite literally produce the machinery that powers and moves our domestic economy – use significant amounts of steel. As a result, EMA and its members have a significant stake in the DOC’s pending investigation.  . . .

While all of those concerns are certainly genuine and significant, there is also a significant national interest in ensuring that domestic manufacturers are not forced to purchase steel at prices that are materially higher than those that prevail in foreign manufacturing markets.

Steel is a key commodity in the manufacture of the goods produced by EMA’s members. In addition, those steel-derived goods are sold into world-wide markets, and so necessarily compete with goods manufactured in multiple foreign locations. To the extent that U.S.-based manufacturers are compelled to pay more for necessary steel inputs than their foreign competitors, they will be at a significant and unfair disadvantage from the outset.

Restrictions on the imports of steel could result in increases in the price of steel based on reduced supplies in the U.S. marketplace. That cost increase, as noted above, could cause significant competitive disadvantages for U.S.-based manufacturers that utilize steel as a key commodity in their manufacturing operations. It also could force manufacturers to pass on higher prices for their finished goods to U.S. consumers, thereby compounding the negative impacts of the increased price of steel in the U.S. Accordingly, in addition to the important concerns that are motivating the DOC’s investigation, the DOC should take into account, and give high priority to, the potential impacts on the competitiveness of U.S.-based manufacturers. A proper assessment of those impacts should be a key component of any recommendation that the DOC submits to the President on this matter.

Previous experience with additional tariffs and related restrictions on steel imports is highly instructive. In 2002, the U.S. government imposed tariffs on a broad range of steel imports over a 3-year period. In subsequent studies of the economic impact of those tariffs, it was found that the tariffs had resulted in a number of unintended adverse consequences, including the following: (i) 200,000 Americans lost their jobs due to higher steel prices; (ii) one-quarter of those job losses occurred in the machinery and equipment, and transportation equipment sectors; (iii) every U.S. State experienced employment losses from higher steel costs; and (iv) steel tariffs caused shortages and higher steel prices that put U.S. manufacturers of steel-containing products at a disadvantage relative to their foreign competitors. The same types of unintended adverse consequences could result in this case, depending on the types of “adjustments” to steel imports that the DOC may choose to recommend as an outcome of the pending study. . . .

Like the chorus in a Greek tragedy, US manufacturers that rely on steel as a key raw material input are crying their warning about imposing restrictions on steel imports.  Many more jobs on a factor of 10 could be lost by the restraints than are saved by the restraints.  The real question is whether Commerce Secretary Wilbur Ross and President Trump are listening.

ALUMINUM

On April 27, 2017, President Trump and the US Commerce Department self-initiated a Section 232 National Security case against imports of aluminum from all countries.  See the attached documents related to the Case Section 232 Investigation on the Effect of Imports of Aluminum on US National S ALUMINUM FED REG PUB Aluminum Presidential Memo Summary.  The hearing will be June 22, 2017 at the Commerce Department.

Trump has indicated that he is expecting the Aluminum report by the end of June.  But the hearing will be held on June 22nd with written comments due by June 29th.  That certainly shows a rush to protectionist judgment when aluminum users will have the same concerns as steel users.

DONALD TRUMP AND RONALD REAGAN—DIAMETRICALLY OPPOSITE IN ONE IMPORTANT AREA—TRADE

It is important to note that there is one area in which President Ronald Reagan and President Donald Trump are diametrically, 180 degrees opposite and that is trade.  None of the news shows that are Pro-Trump and Pro-Republican highlight the trade views of the Gipper, but he was certainly no Donald Trump and Donald Trump is no Ronald Reagan when it comes to trade.

At a time like this, it is important to review President Reagan’s June 28, 1986 speech on international trade. President Reagan knew something that President Trump does not work.  Protectionism destroys jobs.  As Reagan stated:

Now, I know that if I were to ask most of you how you like to spend your Saturdays in the summertime, sitting down for a nice, long discussion of international trade wouldn’t be at the top of the list. But believe me, none of us can or should be bored with this issue. Our nation’s economic health, your well-being and that of your family’s really is at stake.

That’s because international trade is one of those issues that politicians find an unending source of temptation. Like a 5-cent cigar or a chicken in every pot, demanding high tariffs or import restrictions is a familiar bit of flimflammery in American politics. But cliches and demagoguery aside, the truth is these trade restrictions badly hurt economic growth.

You see, trade barriers and protectionism only put off the inevitable. Sooner or later, economic reality intrudes, and industries protected by the Government face a new and unexpected form of competition. It may be a better product, a more efficient manufacturing technique, or a new foreign or domestic competitor.

By this time, of course, the protected industry is so listless and its competitive instincts so atrophied that it can’t stand up to the competition. And that, my friends, is when the factories shut down and the unemployment lines start. We had an excellent example of this in our own history during the Great Depression. Most of you are too young to remember this, but not long after the stock market crash of 1929, the Congress passed something called the Smoot-Hawley tariff. Many economists believe it was one of the worst blows ever to our economy. By crippling free and fair trade with other nations, it internationalized the Depression. It also helped shut off America’s export market, eliminating many jobs here at home and driving the Depression even deeper. . . .

Sometimes foreign governments adopt unfair tariffs or quotas and subsidize their own industries or take other actions that give firms an unfair competitive edge over our own businesses. On those occasions, it’s been very important for the United States to respond effectively, and our administration hasn’t hesitated to act quickly and decisively.

And in September, with more GATT talks coining up once again, it’s going to be very important for the United States to make clear our commitment that unfair foreign competition cannot be allowed to put American workers in businesses at an unfair disadvantage. But I think you all know the inherent danger here. A foreign government raises an unfair barrier; the United States Government is forced to respond. Then the foreign government retaliates; then we respond, and so on. The pattern is exactly the one you see in those pie fights in the  old Hollywood comedies: Everything and everybody just gets messier and messier. The difference here is that it’s not funny. It’s tragic. Protectionism becomes destructionism; it costs jobs.

Now I know that others, including USTR Lighthizer himself, argue that Reagan was not really a free trader.  But the trade actions he took, including his appointment of very free traders as ITC Commissioners, show that Reagan deeply understood the dangers of protectionism.  He lived through the Great Depression and the effects of the 1930 Smoot Hawley Tariff Act.  Donald Trump did not live during that time period and the comments of the US Steel users above indicate that President Trump does not understand the dangers of protectionism.

SOLAR 201 ESCAPE CLAUSE CASE

On May 17, 2017, Suniva filed a Section 201 Escape Clause against all Solar Cell imports from all countries at the US International Trade Commission (“ITC”).  On May 23, 2017, in the attached Federal Register notice, ITC iNITIATION NOTICE SOLAR CELLS, the ITC decided to go ahead and institute the case.  If the ITC reaches an affirmative determination, within 60 days the President must decide whether or not to impose import relief, which can be in the form of increased tariffs, quotas or an orderly marketing agreements.

At the ITC, Section 201 cases are a two stage process.  The ITC must first determine whether “crystalline silicon photovoltaic (“CSPV”) cells (whether or not partially or fully assembled into other products) are being imported into the United States in such increased quantities as to be a substantial cause of serious injury, or the threat thereof, to the domestic industry producing an article like or directly competitive with the imported articles.”  The ITC has determined that the investigation is “extraordinarily complicated” and will make its injury determination within 128 days after the petition was filed, or by September 22, 2017. The Commission will submit to the President the report required under section 202(f) of the Act (19 U.S.C. § 2252(f)(1)) within 180 days after the date on which the petition was filed, or by November 13, 2017.

Notices of appearance at the ITC are due on June 22nd at the ITC.  During the injury phase of the investigation, the ITC will hold an injury hearing on August 15, 2017.  Prehearing briefs are due at the ITC on August 8, 2017.  Posthearing briefs will be due at the ITC on August 22nd.

If the ITC reaches an affirmative determination, it will go into a remedy phase and the hearing in that phase will be on October 3, 2017.

COMMERCE AND ITC DEADLINES ARE VERY VERY STRICT

In the ongoing Tool Chests from China antidumping case, Commerce just bounced nine Separate Rates Applications from Chinese companies filed by a US law firm on the due date because of computer problems at Commerce and the law firm.  Most documents are now filed electronically at both the Commerce Department and the International Trade Commission in trade cases.  Computer problems and other filing issues are why we are so paranoid about Commerce and ITC deadlines and try to file documents, if possible, before the deadline date.

Computer systems including the Commerce and ITC computer systems, can have problems and one can miss the deadline.  If deadlines are missed, truly there is hell to pay.

ALUMINUM PALLETS ARE WITHIN THE SCOPE OF THE ALUMINUM EXTRUSIONS CASE

In the attached memorandum, PALLETS IN ALUMINUM EXTRUSIONS CASE, to prevent circumvention, the Commerce Department has determined to include aluminum pallets in the Aluminum Extrusions case.  In one situation, one Chinese producer/exporter exported 1000s of aluminum pallets into the US in an attempt to evade the antidumping (“AD”) and countervailing duty (“CVD”) orders on Aluminum Extrusions.

NEW TRADE CASES

ANTIDUMPING AND COUNTERVAILING DUTY CASES

FINE DENIER POLYESTER STAPLE FIBER

On May 31, 2017, DAK Americas LLC, Nan Ya Plastics Corporation, America, and Auriga Polymers Inc. filed an AD and CVD petition against imports of Fine Denier Polyester Staple Fiber from China, India, Korea, Taiwan, and Vietnam.  The preliminary determination in the CVD case is due October 28th and the AD Preliminary Determination is due December 27, 2017.

CITRIC ACID AND CITRATE SALTS FROM BELGIUM, COLOMBIA AND THAILAND

On June 2, 2017, Archer Daniels Midland Company, Cargill, Incorporated, and Tate & Lyle Ingredients America LLC filed AD and CVD petitions against imports of Citric Acid and Certain Citrate Salts (“Citric Acid”) from Belgium, Colombia, and Thailand.

AD duties are imposed on subject imports that are found to be sold in the United States at less than “normal value.” CVD duties are imposed on imports that benefit from unfair government subsidies. For AD/CVD duties to be imposed, the U.S. government must determine not only that dumping or subsidization is occurring, but also that the subject imports are causing “material injury” or “threat of material injury” to the domestic industry.

This is the second AD/CVD case filed against Citric Acid. AD/CVD orders were previously imposed on citric acid from Canada and China in 2009.  The cases are targeting Chinese subsidiary companies in Thailand and other countries.

Alleged AD Rates

Belgium: 56.02 – 118.44%

Colombia: 41.18 – 49.46%

Thailand: 4.6 – 67.1%

Petitioner also identified various Thai government subsidy programs under the Thai Investment Promotion Act, along with other export-import loans, grants and export promotion measures.

Estimated Schedule of AD/CVD Investigations

June 2, 2017 – Petition filed

June 22, 2017 – DOC initiates investigations

June 23, 2017 – ITC staff conference

July 17, 2017 – ITC Preliminary Determination

October 30, 2017 – DOC CVD Preliminary Determination (assuming extended deadline)

December 29, 2017 – DOC AD Preliminary Determination (assuming extended deadline)

May 13, 2018 – DOC AD/CVD final determinations (assuming AD, CVD aligned and extended)

June 27, 2018 – ITC Final Determination (extended)

July 4, 2018 – DOC AD/CVD orders issued (extended).

OTHER TRADE CASES

SECTION 201 ESCAPE CLAUSE CASE AGAINST RESIDENTIAL WASHERS

On May 31, 2017, Whirlpool Corp. filed another Section 201 Escape Clause case against imports of Large Residential Washers.  The petition indicates that this is an attempt by Whirlpool to go after the Korean producers, including Samsung.  Whirlpool tried AD and CVD cases against Korea, but that failed because the Korean producers moved to another country.  Now like the Solar Cells 201 case, the US producer is trying to close the holes in the trade protection.

But do note another point, what is the major raw material input for residential washing machines—Steel. When US steel prices are many times higher than the world market price, that puts US steel users at a major competitive disadvantage.

USTR ROBERT LIGHTHIZER CONFIRMED—NAFTA FIGHT

Countries are still gearing up for NAFTA negotiations.  President Trump has told USTR Lighthizer not to do any damage and add to the bottom line.

Attached is an article with my quotes about the Mexico/Sugar suspension agreement to settle the dumping case against Mexico, Wilbur Ross likely will impose Mexico sugar deal over industry objections.  The Suspension Agreement will be finalized on June 30th with some possible tweaks to make the US industry feel better.  In fact, on June 16, 2017, Politico reported that the US sugar industry has given its blessing to the US-Mexico sugar deal making Commerce Secretary Ross’s day.  As Secretary Ross stated:

“I am glad all parties have agreed that the new sugar agreement is fair and addresses the shortcomings of the original deal.  I look forward to seeing the public comments on this deal, but am hopeful that we can successfully implement this new agreement with the support and cooperation of all stakeholders.”

The Sugar deal shows that Wilbur Ross wants to clear up trade issues before the NAFTA negotiations begin in earnest so we can expect a similar deal in the Lumber case.

On June 14, 2017, Robert Samuelson, a well-known economist, in an article in the Washington Post entitled “Trump is Deluded About NAFTA” stated:

The Trump administration is determined to renegotiate the North American Free Trade Agreement (NAFTA) — which created a single market from Mexico’s southern border to the Yukon — but the main political appeal of this policy rests on a popular myth: that “fair” trade requires the United States to have a surplus or balanced trade with both Mexico and Canada.

We are supposed to feel especially aggrieved that Mexico regularly has a sizable surplus with us, $63.2 billion in goods in 2016, according to Commerce Department figures. This shows, as the president repeatedly has said, that U.S. trade officials negotiated a bad deal for American firms and workers. Trump has promised to do much better.  That will be hard. . . .

In addition, the trade imbalances within NAFTA aren’t as large as they seem. It’s true — as noted — that the United States had a $63.2 billion deficit in goods trade (cars, computers, plastics) with Mexico. But the U.S. surplus on services (travel, transportation, consulting) was $7.6 billion, reducing the overall deficit with Mexico to $55.6 billion. On the same basis, covering goods and services, the United States had a trade surplus of $12.5 billion with Canada in 2016.

So: The total trade deficit with Canada and Mexico was $43.1 billion ($55.6 billion minus $12.5 billion). All trade — exports and imports — between the United States and Canada and Mexico totaled $1.207 trillion in 2016. Our net deficit equaled 3.5 percent of total trade and about two-tenths of 1 percent of U.S. GDP. This hardly seems crushing.

Against that backdrop, the notion that either Canada or Mexico is going to offer the United States vast new markets in their countries — without corresponding U.S. concessions — seems wishful thinking. “The administration appears to perceive Mexico and perhaps Canada as surplus countries,” writes [Fred} Bergsten, “whereas they (more accurately) see themselves as deficit countries,” seeking to increase exports or dampen imports. This is Trump’s delusion.

BORDER ADJUSTMENT TAXES

Although the Trump Administration says that the Border Adjustment tax (“BAT”) is dead, it continues to raise its head.  On June 7th Senate Finance Committee Chairman Orrin Hatch stated at a global transfer pricing conference in Washington DC that although Congressional Republicans and the White House are generally 80 percent in agreement on key issues for tax reform, he has not ruled out the BAT proposal.

Hatch noted the resistance against the BAT, including from certain industries that are “downright apoplectic” about it, but then went on to state that it will have a difficult time becoming law:

“I don’t think I’m making any news when I say that, given the small margin of error we have in the Senate and the number of senators who oppose the very concept of a [BAT], the proposal will have a difficult time becoming law. That said, I want to see the specifics of the proposal and find out if it works like its proponents say it will. Until then, I’m not going to publicly rule anything out.”

Hatch also said on Wednesday that the tax reform plan should include a conversion to a territorial system, which would see only revenue generated in the U.S. taxed. Under the current system, all revenue earned by U.S. ­incorporated companies, regardless of where it is earned, is taxed.  As Hatch stated

“My position has, I believe, remained clear: A territorial system will put us on par with other industrialized countries and allow our businesses to compete in the global marketplace.”

On June 15, 2017, it was reported that Kevin Brady, Chairman of House Ways and Means, has proposed a five year transition to a BAT to make it more palatable.  As Brady stated:

“My current thinking on border adjustment … is a five-year transition.  We’ll be lifting the ‘Made in America’ tax [on exports] at the same rate.  A very gradual five-year phase-in really resolves a lot of the challenges.”

But many opponents argued that a five year transition did not make the BAT a good idea.

TRADE ADJUSTMENT ASSISTANCE FOR FIRMS/COMPANIES – A BETTER ALTERNATIVE TRADE REMEDY WHICH ACTUALLY WORKS

As indicated in previous blog posts, I feel very strongly about the Trade Adjustment Assistance for Companies program because with very low funding it has a true track record of saving US companies.  In fact, in the ongoing Section 201 case on Solar Cells, the statute requires the industry seeking protection to provide a trade adjustment plan to the Commission to explain how the industry intends to adjust if trade relief is provided.  The problem is that the Commission is not the entity with experience on determining whether the Trade Adjustment plans are viable.  The entities with that experience in trade adjustment plans are the various trade adjustment centers throughout the US.

Donald Trump’s proposed budget, however, would 0 out the trade adjustment assistance for companies program.  Although Secretary Wilbur Ross has made it very clear he wants to increase exports to reach the 3% plus growth rate, putting protectionist walls up to limit imports of steel, aluminum and many other products invites retaliation.

The Trade Adjustment Assistance for Firms/Companies program does not put up barriers to imports.  Instead the TAA for Companies program works with US companies injured by imports to make them more competitive.  The objective of TAA for Companies is to save the company and by saving the company it saves the jobs that go with that company.

In contrast to TAA for workers, TAAF or TAA for Companies is provided by the Economic Development Administration at the Commerce Department to help companies adjust to import competition before there is a massive lay-off or closure.  Yet the program does not interfere in the market or restrict imports in any way.

Right now the total cost to the US Taxpayer for this nationwide program is $12.5 million dollars—truthfully peanuts in the Federal budget.  Moreover, the Federal government saves money because if the company is saved, the jobs are saved and there are fewer workers to retrain and the saved company and workers end up paying taxes at all levels of government rather than being a drain on the Treasury.  In his budget, Trump increases TAA for Workers, but kills TAA for Companies.  Yet to retrain the worker for a new job, the average cost per job is $5,000.  To save the company and the jobs that go with it in the TAA for Companies program, the average cost per job is $1,000.

Moreover, TAA for Firms/Companies works.  In the Northwest, where I am located, the Northwest Trade Adjustment Assistance Center, http://www.nwtaac.org/, has been able to save 80% of the companies that entered the program since 1984. The Mid-Atlantic Trade Adjustment Assistance Center, http://www.mataac.org, uses a video, http://mataac.org/howitworks/, to show in detail how the program resulted in significant turnarounds for four companies. The reason the TAA for Firms/Companies is so successful—Its flexibility in working with companies on an individual basis to come up with a specific adjustment plan to make them competitive once again in the US market as it exists today.  For a sample recovery plan, see http://mataac.org/documents/2014/06/sample-adjustment-plan.pdf, which has been developed specific to the strengths, weaknesses and threats each company faces.

But as also stated in my last blog post, in this environment with so many injured companies, funding for TAA for Firms/Companies has to be increased so it can do its job.   Moreover, with the threats of a massive trade war in the air, which will injure all US companies and destroy US jobs, the US government needs to look at an alternative—TAA for Firms/Companies is that alternative.

FOREIGN ANTIDUMPING AND COUNTERVAILING DUTY LAW AND CASES

UNIVERSAL TRADE WAR CONTINUES

CHINA AD/CVD NEWSLETTERS

Attached are newsletters from Chinese lawyer Roland Zhu and his trade group at the Allbright Law Office about Chinese trade law.  Team’s newsletter-EN Vol.2017.22 Team’s newsletter-EN Vol.2017.23

SECTION 337 AND IP CASES

NO NEW 337 CASES AGAINST CHINA

If you have any questions about these cases or about Trump and Trade, the impact on downstream industries, the Section 232 cases, the 201 case against Solar Cells, border adjustment taxes, US trade policy, the antidumping or countervailing duty law, trade adjustment assistance, customs, False Claims Act or 337 IP/patent law, please feel free to contact me.

Best regards,

Bill Perry

US CHINA TRADE WAR–TRUMP TRADE AGENDA, INTERNAL TRADE BATTLES, LIGHTHIZER, BORDER ADJUSTMENT TAXES, AGRICULTURE, NAFTA, TRADE ADJUSTMENT ASSISTANCE, CFIUS, ZTE AND SECTION 337

TRADE IS A TWO WAY STREET

“PROTECTIONISM BECOMES DESTRUCTIONISM; IT COSTS JOBS”

PRESIDENT RONALD REAGAN, JUNE 28, 1986

US CHINA TRADE WAR UPDATE APRIL 21, 2017—MANY NEW TRADE CASES BEING FILED

The Trump trade war has escalated big time with new antidumping and countervailing duty cases against Mechanical Tubing, Tool Chests and a new Section 232 National Security case against all Steel imports.  Many importers simply do not realize how fast these trade cases move and how fast they can find themselves liable for antidumping and countervailing duties and other trade sanctions. With a sympathetic Trump Administration and a very sympathetic Wilbur Ross as the new Secretary of Commerce, more cases are going to be filed against China and numerous other countries.

In addition to the new trade cases, two section 337 patent cases has been filed against China on sockets for mobile electronic devices and robotic vacuum cleaning devices.

COLD-DRAWN MECHANICAL TUBING FROM CHINA, GERMANY, INDIA, ITALY, KOREA AND SWITZERLAND

On April 19, 2017, ArcelorMittal Tubular Products, Michigan Seamless Tube, LLC, PTC Alliance Corp., Webco Industries, Inc., and Zekelman Industries, Inc. filed major Antidumping and Countervailing Duty cases against hundreds of millions of dollars of cold-drawn mechanical tubing from the six countries in 2016.  The petition alleges antidumping duties ranging as follows:

China: 88.2% – 188.88%

India: 25.48%

Italy: 37.23% – 69.13%

Germany: 70.53% – 148.32%

Republic of Korea: 12.14% – 48.61%

Switzerland: 40.53% – 115.21%

The cold-drawn mechanical tubing covered by the complaint is used to produce numerous different products in the United States, including auto parts and machinery.

As stated above, these trade cases move very quickly and many importers are blindsided because of the speed of the investigations.  In the Mechanical Tubing case, as indicated in the attached notice, ITC PRELIM MECHANICAL TUBING NOTICE, the ITC will conduct its preliminary injury hearing on May 10, 2017.  US importers’ liability for countervailing duties on imports from China and India will start on September 16, 2017, 150 days after the petition was filed, and for Antidumping Duties will start on November 15, 2017, 210 days after the petition was filed.

The entire investigation will take one year and antidumping and countervailing duty orders can last for 5 to 30 years.

If Importers want to fight the case, they must move quickly.  The first ITC hearing in the case will be on May 10, 2017, which is the part of the proceeding where importers can have a real impact.

Atttached is a copy of the relevant parts of the AD and CVD complaints along with a list of the targeted Indian, Chinese, Korean, German, Swiss and Italian exporters/producers and US importers, please feel free to contact me.  INJURY EXCERPT SCOPE IMPORTERS EXERPT MECHANICAL TUBING FOREIGN PRODUCERS EXCERPT MECHANICAL TUBING

TOOL CHESTS FROM CHINA AND VIETNAM

On April 11, 2017, Waterloo Industries Inc. filed major Antidumping and Countervailing Duty cases against hundreds of millions of dollars of imports of certain tool chests and cabinets from China and Vietnam.

As indicated in the attached notice, ITC PRELIM MECHANICAL TUBING NOTICE, in the Tool Chests case, the ITC will conduct its preliminary injury hearing on May 2, 2017.  US importers’ liability for countervailing duties on imports from China will start on September 8, 2017, 150 days after the petition was filed, and for Antidumping Duties from China and Vietnam will start on November 7, 2017, 210 days after the petition was filed.

The entire investigation will take one year and antidumping and countervailing duty orders can last for 5 to 30 years.

If Importers want to fight the case, they must move quickly.  The first ITC hearing in the case will be on May 2, 2017, which is the part of the proceeding where importers can have a real impact.

Attached is a copy of the relevant parts of the AD and CVD complaints along with a list of the targeted Chinese and Vietnamese exporters/producers and US importers, Tool chests CHN VNM petition vol 1 narrative.  If anyone has any questions, please feel free to contact me.

With a sympathetic Trump Administration in power, there will be a sharp rise in AD and CVD cases against China and other countries.

NEW NATIONAL SECURITY SECTION 232 CASE AGAINST STEEL IMPORTS FROM NUMEROUS COUNTRIES, INCLUDING CHINA

On April 20, 2017, as indicated in the attached documents, Presidential Memorandum Prioritizes Commerce Steel Investigation _ Department of Commerce Section 232 Investigation on the Effect of Imports of Steel on U.S, President Trump announced a new trade investigation of steel imports under section 232 to determine if the tariffs should be imposed because the increased steel imports pose a threat to national security.  The trade action will be conducted under Section 232 of the Trade Expansion Act since 2001.

If the Commerce Department determines that the steel imports are a threat to national security, President Trump will be empowered to levy high tariffs and quotas on imports of steel products from various countries.

Under Section 232, the Commerce Department will conduct an investigation into the potential national security threat posed by the entry of foreign steel into the U.S. market. Commerce must issue its findings to the White House within 270 days, along with recommendations on what steps to take.

Commerce Secretary Wilbur Ross has stated, however, that the investigation may move along a faster track.  Once Commerce’s review is completed, the President has 90 days to decide whether to accept or reject its recommendations and to impose trade restraints, including tariffs or quotas on steel imports.

This may be the first attack, not just against China, but all steel imports from every country.  The problems with Commerce self-initiating antidumping and countervailing duty cases is the International Trade Commission.  The Administration does not control the ITC, but it does control Commerce.  By bringing a section 232 case, the Administration skips the injury test by the ITC and assuming the Commerce Department reaches an affirmative determination, the President is empowered to impose import relief in the form of tariffs and quotas.  From the Administration’s point of view, there is more than one way to solve the import problem.

NEW SECTION 337 CASES AGAINST CHINA AND OTHER COUNTRIES

COLLAPSIBLE SOCKETS FROM MOBILE ELECTRONIC DEVICES

On April 10, 2017, in the attached ITC notice, SOCKETS MARINE, PopSockets LLC filed a section 337 patent case against imports of Collapsible Sockets for Mobile Electronic Devices from the following Chinese companies:

Agomax Group Ltd., Hong Kong; Guangzhou Xi Xun Electronics Co., Ltd., China; Shenzhen Chuanghui Industry Co., Ltd., China; Shenzhen VVI Electronic Limited, China; Shenzhen Yright Technology Co., Ltd., China; Hangzhou Hangkai Technology Co., Ltd., China; Shenzhen Kinsen Technology Co., Limited, China; Shenzhen Enruize Technology Co., Ltd., China; Shenzhen Showerstar Industrial Co., Ltd., China; Shenzhen Lamye Technology Co., Ltd., China; Jiangmen Besnovo Electronics Co., Ltd., China; Shenzhen Belking Electronic Co., Ltd., China; Yiwu Wentou Import & Export Co., Ltd., China; and Shenzhen CEX Electronic Co., Limited, China.

ROBOTIC VACUUM CLEANING DEVICES

On April 18, 2017, in the attached ITC notice, ROBOTIC VACUM CLEANERS, iRobot Corporation filed a section 337 patent case against imports of Robotic Vacuum Cleaning Devices from the following US and Chinese companies:

Bissell Homecare, Inc., Grand Rapids, Michigan; Hoover Inc., Glenwillow, Ohio; Royal Appliance Manufacturing Co., Inc. d/b/a TTI Floor Care North America, Inc., Glenwillow, Ohio; Bobsweep, Inc., Canada; Bobsweep USA, Henderson, Nevada; The Black & Decker Corporation, Towson, Maryland; Black & Decker (U.S) Inc., Towson, Maryland; Shenzhen ZhiYi Technology Co., Ltd., d/b/a iLife, China; Matsutek Enterprises Co., Ltd., Taiwan; Suzhou Real Power Electric Appliance Co., Ltd., China; and Shenzhen Silver Star Intelligent Technology Co., Ltd., China.

If you have any questions about these cases or about the antidumping and countervailing duty cases, Section 232 Steel case, Trump and Trade, US trade policy, or 337 IP/patent law, please feel free to contact me.

Best regards,

Bill Perry

US CHINA TRADE WAR MARCH 26, 2017

Dear Friends,

Although politicians in Washington DC have been focused on Obamacare and Russian involvement in the election, trade issues lurk beneath the surface.  Trade was stirred up with the release of Trump’s Trade Agenda, Lighthizer Confirmation Hearings, rumors of internal fights in the Trump trade team and meetings with foreign leaders, including Angela Merkel of Germany.  In fact, the amount of material on trade is mountainous.

One of the pillars for Trump’s objective of hitting a 3 percent annual growth rate (Obama never got over 2%,), is increased US exports, but as indicated above, trade is a two-way street.  As Democratic Congressman Rick Larson of Washington stated recently at the Washington Council on International Trade Meeting on March 13, the Trump Administration has to choose between a trade policy of Trade Agreements or Border Adjustment Taxes.  If the Trump Administration intends to hit imports with increased Border Adjustment Taxes, it will be very difficult to negotiate trade agreements with the many countries on Trump’s list.

On March 21st, in pushing the Republicans in the House of Representatives to push for the Obamacare repeal bill, President Trump stated that without the Obamacare repeal, the Republicans cannot take up the Tax Bill.  But with the collapse of the Obamacare repeal on March 24th, Congress is pivoting to Tax Reform.  That means tax reform, including the Border Adjustment Taxes, will be front and center.  The target of Trump and the Republican Congress is to pass a tax reform bill by August.

Thus the Trump Administration will be soon at a crossroads—increased taxes/tariffs on imports or trade agreements.  It will be very difficult, if not impossible, to have both.

Meanwhile, the decision of Senate Democrats to stall on the Confirmation of Robert Lighthizer has hurt the trade debate in the Administration.  Lighthizer knows trade law.  Many of the officials, such as Steve Bannon and Peter Navarro, in the Administration, do not know trade law and the Democratic decision to stall the confirmation truly has hurt the United States.

In addition to Border Adjustment taxes, this newsletter contains several articles about Trump and Trade or the Trump Trade Report.  There are growing arguments between Administration officials and by Republican Senators and Representatives outside the Administration on the Trump Trade Policy as officials and Senators and Congressmen understand the ramifications of a protectionist trade policy on the constituents in their States and Districts.

Agriculture is waking up. During the recent March 14 Confirmation Hearing of Robert Lighthizer, one could see the concerns of Senators from Agricultural States as they realize that agricultural exports, their ox will be the one gored by the new Trump trade policy.

Meanwhile, NAFTA will be renegotiated; CFIUS may include reciprocity: China is taking a divide and conquer strategy on the Non-Market Economy Issue in Antidumping Cases; and new trade cases have been filed on Aluminum Foil and Silicon Metal.

ZTE has agreed to pay record fines because of its export control violations; and a recent section 337 patent case stated that the US production of the patent lessee can be used to meet the domestic industry requirement.

In addition, hopefully Trade Adjustment Assistance for Companies, which is the only effective US trade remedy that saves companies and the jobs that go with them without curtailing imports, will expand.

If anyone has any questions or wants additional information, please feel free to contact me at my e-mail address bill@harrisbricken.com.

Best regards,

Bill Perry

TRUMP TRADE REPORT

TRUMP ADMINISTRATION ISSUES ITS 2017 TRADE POLICY AGENDA AND IT CREATES CONCERNS

On March 1, 2017, the Trump Administration issued its attached National Trade Policy Agenda for 2017 pursuant to 19 U.S.C. § 2213(a)(l)(B), 2017 TRUMP Trade Agenda.  In the short summary, which was released on March 1st, Trump stated in part:

“The overarching purpose of our trade policy – the guiding principle behind all of our actions in this key area – will be to expand trade in a way that is freer and fairer for all Americans. Every action we take with respect to trade will be designed to increase our economic growth, promote job creation in the United States, promote reciprocity with our trading partners, strengthen our manufacturing base and our ability to defend ourselves, and expand our agricultural and other exports.

As a general matter, we believe that these goals can be best accomplished by focusing on bilateral negotiations rather than multilateral negotiations – and by renegotiating and revising trade deals when our goals are not being met. Finally, we reject the notion that the United States can strengthen its geopolitical position by adopting trade measures that make American workers, farmers, ranchers, and businesses less competitive in global markets.”

In other words, the Trump Administration will take a much stronger position on trade agreements and trade policy.

The most controversial part of the Trade Policy Agenda is the strict approach to the WTO.  Thus, one of the key objectives of the Agenda is”

“Resisting efforts by other countries – or international bodies like the World Trade Organization (“WTO”) – to weaken the rights and benefits of, or increase the obligations under, the various trade agreements to which the United States is a party.”

The Agenda then states under the section “Defending Our National Sovereignty Over Trade Policy”:

“it has been a basic principle of our country that American citizens are subject only to laws and regulations made by the U.S. government – not rulings made by foreign governments or international bodies. This principle remains true today.  Accordingly, the Trump Administration will aggressively defend American sovereignty over matters of trade policy.”

One of the key objectives, just like other Administrations, will be to reduce and eliminate foreign barriers to US exports, but the Agenda then goes on to state:

“It is time for a more aggressive approach. The Trump Administration will use all possible leverage – including, if necessary, applying the principle of reciprocity to countries that refuse to open their markets – to encourage other countries to give U.S. producers fair access to their markets. The purpose of this effort is to ensure that more markets are truly open to American goods and services and to enhance, rather than restrict, global trade and competition.”

One key principle the administration said it plans to apply is a form of trade quid pro quo called “reciprocity” to countries that refuse to open up their markets.  Lawmakers and the Trump administration are considering toughening up national-security reviews of foreign investments into the U.S. to leverage better trade terms with China. If Beijing does not open up its markets to U.S. investors or exports, for example, the administration could use its powers to block Chinese deals to buy U.S. assets, or threaten higher tariffs on  Chinese imports.

The Agenda also expresses an interest in using Section 301 of the Trade Act of 1974 to open up restraints in foreign countries to US exports.  But 301 has not been used since the WTO’s 1995 inception.  The Agenda states

“Properly used, Section 301 can be a powerful lever to encourage foreign countries to adopt more market-friendly policies.  The Trump administration believes that it is essential to both the United States and the world trading system that all U.S. trade laws be strictly and effectively enforced.”

The Agenda also singles out trade deficits with China, Mexico, Canada and Korea and calls for a renegotiation of trade agreements and a more aggressive approach to trade enforcement.  Although these policies are very aggressive on paper, the question is how will the new Trump Administration apply these policies.

In conclusion, the Agenda states:

“For more than 20 years, the United States government has been committed to trade policies that emphasized multilateral agreements and international dispute settlement mechanisms. The hope was that by giving up some of our willingness to act independently, we could obtain better treatment for U.S. workers, farmers, ranchers, and businesses, Instead, we find that in too many instances, Americans have been put at an unfair disadvantage in global markets. Under these circumstances, it is time for a new trade policy that defends American sovereignty, enforces U.S. trade laws, uses American leverage to open markets abroad, and negotiates new trade agreements that are fairer and more effective both for the United States and for the world trading system, particularly those countries committed to a market-based economy.”

The Trump Administration also stated that it intends to update the document when Congress confirms Robert Lighthizer as the next US Trade Representative.

Parts of the policy document contain arguments similar to those in a widely attached circulated memorandum Mr. Lighthizer wrote in 2010 to the US China Commission, LIGHTHIZER 2010 STATEMENT US CHINA ECONOMIC SECURITY COMMISSION. At the time, Mr. Lighthizer told a congressionally mandated China commission that the U.S. could put its WTO commitments on hold, restricting imports from China until the country changes its behavior in key areas.

When the Trump Trade Agenda came out, the Press reported that the Trump Administration will ignore adverse decisions from the WTO.  During the Obama Administration, however, although WTO decisions were not ignored, they were slow walked, especially in the antidumping and countervailing duty area, with only small changes made in response to the WTO decision.

The Trump Administration will probably follow the same procedures.  The rubber will only meet the road when in response to adverse WTO decisions, foreign countries work up retaliation lists.  Then the Administration will have to decide whether to ignore the WTO decision or not.

In fact, after the Agenda was released, Presidential spokesman Sean Spicer stated that noncompliance with the WTO was not the formal policy of the administration.

In addition, many trade experts believe that the Trade Agenda was just rhetoric and we will need to see whether in the future there truly will be a fundamental shift in actual trade policy.  As one trade expert told me, it will take years for this policy to actually work out.

Moreover, as indicated below, Agriculture is waking up.  Now that Agricultural Senators and Congressmen realize that if there is a trade war, their ox is the one that will get gored, agriculture exports will be seriously hurt, the Trump Administration will probably slow up its aggressive trade policy as the hot protectionist rhetoric meets the realities of the international trade system where trade is a two way street.

If the United States truly signals it will not comply with WTO decisions, and other countries impose retaliatory penalties against U.S. imports, it could usher in an era of economic protectionism worldwide, which could trigger a global trade war that could disrupt international business and growth.  But that also would mean that the Trump Administration will not meet its 3% GDP growth target for the entire economy.

The real issue that the Trump Administration simply does not understand is that even though there may be trade deficits, free trade rises all boats.  The US now has over $1 trillion in exports, but the Trump Administration is focused on trade deficits with countries, such as China, Mexico and Germany.  The Trump Administration ignores the trade surpluses with other countries.  More importantly, free trade agreements have caused all boats to rise, increasing economic activity in the United States and creating jobs.  Because of NAFTA, US exports have quintupled creating millions of new jobs, but the Trump Administration appears to focus only on the trade deficit, which is relatively small in comparison to the surge in US exports.

At the same time that the White House issued its trade agenda on March 1, John Brinkley of Forbes, in an article entitled,Trump’s Trade Ideas As Bad As Ever,” responded to on President Trump’s first “State of the Union” address to the Congress where Trump stated:

“I believe strongly in free trade, but it also has to be fair trade.

Fine, but how do you achieve fair trade? Is it to punish other countries whose trade policies aren’t advantageous to the United States? Or is it to work with them collegially to get them to change those policies?
The latter course is the one that all presidents since World War II have chosen. They have negotiated 14 free trade agreements with 20 countries – agreements that require parties to eliminate tariffs and give fair and equitable treatment to one another.

Previous presidents helped set up the GATT and then the World Trade Organization as a forum for ensuring that countries play by the rules of global trade. Since the WTO was created in 1994, the United States has quietly resolved hundreds of trade disputes in its favor through WTO-sponsored consultations.

When consultations don’t solve the problem, the government can file a formal complaint in the WTO’s Dispute Resolution Body. If it rules in our favor, we can impose temporary, retaliatory tariffs or demand compensation.

That is fair trade. Accusing other countries of taking advantage of us, threatening them with exorbitant tariffs, and declaring that the United States is not beholden to WTO rules, as the Trump administration did today, is not fair trade. It’s more like anarchy.

On March 8, 2017 after the Trade Policy Agenda was issued, John Brinkley of Forbes published another article entitled, “Trump’s Disdain For WTO Portends Only Trouble” stating:

After the World Trade Organization was established in 1995, the Clinton, Bush and Obama administrations made good use of its dispute settlement system. The United States is batting about .500 in cases that proceeded to a final ruling; most of them don’t. Barack Obama had a perfect record in the WTO when he left office, but some of the complaints his administration filed are still pending.

None of the three presidents said the system was unfair or tried to make an end run around it.

Then came Donald Trump. He has nothing but disdain for the WTO and for the very idea of an international organization making and enforcing rules that the United States has to obey. So, in keeping with Trump’s “America First” ideology, the White House declared last week that America doesn’t have to follow those rules.

When one country accuses another of a trade rule violation, such as dumping a product in the host country at below-market value or unfairly subsidizing a domestic industry, the first step toward resolving it is a WTO-sponsored consultation between the two governments. If that fails, the accuser can request a hearing by a dispute settlement panel. The loser of that proceeding can take its case to the WTO’s Appellate Body.

Between 1995 and 2015, the United States filed 109 complaints to the WTO’s Dispute Settlement Body and had 124 filed against it. The U.S. government has settled about two-thirds of them through consultations, thus making recourse to a hearing unnecessary. Like most diplomatic initiatives, these results are achieved out of the public eye and without fanfare.

It’s hard to know what the Trump administration finds objectionable about this system, or why he considers the WTO “a disaster.” None of the WTO’s 163 other members seem to have a problem with it.

But Trump and his merry band of protectionists think they know a better way: to ignore the WTO if it issues a ruling they don’t like.

The President’s Trade Policy Agenda for 2017 says legislation enacted in 1994 lets the administration decide arbitrarily whether to comply with a WTO dispute settlement ruling that goes against the United States.

“If a WTO dispute settlement report is adverse to the United States, [the U.S. Trade Representative shall] consult with the appropriate Congressional committees concerning whether to implement the report’s recommendation, and, if so, the manner of such implementation and the period of time needed for such implementation,” the Trade Policy Agenda says.

In other words, the United States will comply with WTO decisions – decisions based on rules that the United States helped write – if it feels like it. Incredibly, Trump, et al, seem to think this approach would have no negative consequences.

If the U.S. government refuses to comply with a dispute settlement ruling against it, the WTO can authorize retaliation by the aggrieved party. That is likely to be a tariff increase targeted at the industry whose trade practices led to the adverse ruling. If a targeted tariff increase isn’t feasible, the aggrieved country can raise tariffs against some other industry.

Presumably, Trump would then retaliate against the retaliator and off we’d go into a destructive trade war.

It’s important to understand that the United States was intimately involved in the creation of the WTO and the drafting of its rules. During previous administrations, the U.S. ambassador to the WTO was in Geneva almost every day protecting the interests of the American industries and workers. Contrary to what Trump says, the WTO is not a foreign body accountable to no one. It’s a democratic institution, accountable to its members.

As former U.S. Trade Representative Michael Froman said in the President’s Trade Agenda for 2014:

“A robust international trading system offers the greatest economic benefits when all trading partners abide by their commitments and play by the same rules.”

LIGHTHIZER CONFIRMATION HEARING

On March 14, 2017, the Senate Finance Committee held its confirmation hearing on Robert Lighthizer as United States Trade Representative.  One can see the confirmation hearing in its entirety at https://www.c-span.org/video/?425333-1/us-trade-representative-nominee-testifies-confirmation-hearing

But as of March 23, 2017, Lighthizer’s confirmation vote is being held up in the Committee and on the Senate floor because his status as an advocate more than 30 years ago for the Brazilian government in a 1985 trade case, prior to the time when I was an associate at Skadden, Arps, appears to require a waiver in order for him to assume his role at USTR.  Unfortunately, this decision has left Lighthizer, the best trade lawyer on Trump’s team, out of the internal discussions on trade policy.

The White House has itself pushed to make the waiver vote unnecessary. White House counsel Donald F. McGahn wrote to Hatch and Senate Majority Leader Mitch McConnell, R-Ky., on March 3 citing a Clinton-era Office of Legal Counsel opinion as a challenge to the waiver rule.

A week after the March 21st confirmation hearing, Senator Pat Roberts of Kansas stated:

“I think we made it clear, I think [Finance Chairman] Orrin Hatch made it very clear that it’s not needed. But I don’t know what mood our friends across the aisle are in, and I have no idea what they’re going to do.”

Senator Ron Wyden ranking Democrat on the Senate Finance Committee, however, stated:

“We’ve made it clear we’re going to insist on the waiver. There’s this quaint idea that the law should actually matter, and the law says a person in his position has got to get a waiver.”

Thus Lighthizer’s nomination has been held up “for what feels like eons” according to Wyden, but at this point in time it is still not moving.

Meanwhile on March 22, 2017, the U.S. Chamber of Commerce in the attached letter, chamber_letter, pushed for a quick vote Lighthizer for USTR stating:

“Mr. Lighthizer has led a distinguished career as a trade policy practitioner and has a reputation as a staunch advocate for American industry. The Chamber believes he will represent the nation’s interests well as he works with international partners and addresses trade challenges at the negotiating table and before the World Trade Organization. The Chamber encourages a swift vote on his nomination and looks forward to working with him as the next U.S. Trade Representative.”

During the Confirmation hearing, Lighthizer had bipartisan support with many Democratic and Republican Senators vouching support for his candidacy.  One of the two issues of primary importance was the decision to break mega deals, such as the TPP, into bilateral deals with individual countries.

The problem, however, is that trade deals take a lot of time to negotiate.  The TPP took almost 10 years to negotiate with the 12 countries involved.  But by abandoning the TPP, with an objective of creating individual trade deals with the TPP member companies, the US Government has probably quintupled its work load, if not increased it twelve fold.

Although Lighthizer indicated that USTR would use the TPP draft agreement as a basis to negotiate a number of bilateral agreements, negotiating that many trade deals will take an enormous amount of work by a very small agency – USTR—with only just over 200 employees at offices in Brussels Belgium, Geneva Switzerland and Washington DC.  Trump’s budget is not clear whether USTR will get an increase in budget or whether its budget will be cut.

The second point is the importance of Trade Deals to US Agriculture exports.  In the Lighthizer confirmation hearing, all of a sudden Senators from agriculture states started to wake up.  If the TPP had passed, the biggest winner would have been US agriculture exports with tariffs dropping on more than 18,000 different products, many being agricultural products.  Now the TPP is gone and countries are racing into those overseas markets to replace US agricultural products.

Agriculture Senators and Congressmen want trade deals now because the United States is exporting billions of dollars in agricultural products to the rest of the World.  Mexican government officials recently declared that since Trump wants to be tough on trade with Mexico, they will cut $2.4 billion in imports of corn from the United States and replace the US corn with corn from Brazil and Argentina.  Congressman Newhouse at a recent Washington Council on International Trade stated that after the Korea FTA, exports of Washington State cherries doubled and Washington State French fries increased by 52%.  Increased exports means more jobs.

With a decision not to do the TPP, Senators and Congressmen from agricultural states fear that other countries will replace the United States and get those benefits.  As indicated below, that is a real and justified fear.

TRUMP TRADE AGENDA—OPPOSITION TO THE TRUMP TRADE POLICY IN THE ADMINISTRATION AND IN CONGRESS

Part of the Trump trade problem is the perception by Trump and many on his internal trade staff, such as Peter Navarro, that trade is a one-way street.  The Administration apparently believes it can simply issue an executive order raising tariffs, taxes or barriers to imports with no reaction by foreign countries.

But the Trump Administration is now in the international arena.  Although Trump won the Presidency, he has no political power over foreign countries.  Trade is a two-way street and as stated in several past newsletters, Mexico, Canada, China, and Germany have all threatened retaliation if the US imposes trade restraints, including Border Adjustment Taxes.  Deals have to be negotiated, but most countries, including the US, will not negotiate a deal when a gun is pointed at their head.

INTERNAL ADMINISTRATION TRADE FIGHTS—NAVARRO CREATES AN INTERNAL TRADE WAR

On March 10th the Financial Times reported that a trade war had broken out in White House in what was called “a fiery meeting” in the Oval Office pitting economic nationalists close to Donald Trump against pro­trade moderates in Treasury and the Economic Council from Wall Street.

Navarro is the ultra-nationalist economist who has angered Berlin and other European allies by accusing Germany of currency manipulation and exploiting a “grossly undervalued” euro and calling for bilateral discussions with Angela Merkel’s government over ways to reduce the US trade deficit with Germany.

The fight was between trade hardliners, such as Steve Bannon and Peter Narvarro, against the free trade economic faction led by Gary Cohn, the executive from Goldman Sachs, who heads the National Economic Council.  Note that since Lighthizer has not been confirmed, he could not be part of the discussion.  Bannon and Navarro support the Border Adjustment Tax while Cohn and Treasury Secretary Mnuchin oppose it.

During the last several weeks, Navarro appeared to be losing influence. But during the recent Oval Office fight, Mr Trump appeared to side with the economic nationalists.

Mr Navarro’s case has angered Republicans in Congress because he was criticized for being ill­prepared and vague at a closed­door briefing he held with Senators in February.

Reports have been made that Mr Navarro is becoming increasingly isolated in the administration. He has been operating with a very small staff out of an office in the Old Executive Office Building adjacent to the White House, while Mr Cohn has been adding staff to his NEC base inside the West Wing of the White House.

On March 5th, Navarro published an op-ed in the Wall Street Journal on why trade deficits matter:

Do  trade  deficits matter? The question is important because America’s trade deficit in goods is large and persistent, about $2 billion every day. . . .

Reducing a trade deficit through tough, smart negotiations is a way to increase net exports—and boost the rate of economic growth. . . .

Similarly, if the U.S. uses its leverage as the world’s largest market to persuade India to reduce its notoriously high tariffs and Japan to lower its formidable nontariff barriers, America will surely sell more Washington apples, Florida oranges, California wine, Wisconsin cheese and Harley-Davidson motorcycles. Just as surely, the U.S. trade deficit would fall, economic growth would increase, and real wages would rise from Seattle and Orlando to Sonoma and Milwaukee. . . .

But running large and persistent trade deficits also facilitates a pattern of wealth transfers offshore. . .

Might we lose a broader hot war because America has sent its defense-industrial base abroad on the wings of a persistent trade deficit?

Today, after decades of trade deficits and a mass migration of factories offshore, there is only one American company that can repair Navy submarine propellers—and not a single company that can make flat-panel displays for military aircraft or night-vision goggles. Meanwhile, America’s steel industry is on the ropes, its aluminum industry is flat on its back, and its shipbuilding industry is gathering barnacles. The U.S. has begun to lose control of its food-supply chain, and foreign firms are eager to purchase large swaths of Silicon Valley’s treasures.

Much of Wall Street and most economists simply don’t care. But to paraphrase Mike Pence on the 2016 campaign trail, the people of Fort Wayne know better. The analysts at the Pentagon know better, too. That’s why, for both economic and national-security reasons, it is important to bring America’s trade back into balance—through free, fair and reciprocal trade.

As indicated below, however, do trade deficits justify increased US barriers to imports?  Wouldn’t a policy of making companies more competitive with imports, such as Trade Adjustment Assistance for Companies, explained below be a better option.  TAA does not risk retaliation from other countries.

Moreover, as stated above, focusing on trade deficits ignores the enormous increase in US exports to those countries.  Navarro focuses on a trade deficit and ignores the fact that US exports are over $1 trillion and support millions of jobs.  A trade war will cut those exports and jobs in half.  That will not make America great again.

Recently Navarro attempted to intervene in an antidumping duty case at the Commerce Department on Oil Country Tubular Goods from Korea sparking outrage from the trade lawyers representing the Korean steel mills.  Navarro should keep in mind that the Commerce Department in antidumping cases makes its decision based on the facts on the administrative record and the Commerce Department’s determinations are subject to Court review by the Court of International Trade and the Court of Appeals for the Federal Circuit.  In the past, Courts have made clear that when a Government agency, such as the Commerce Department, makes a decision based on politics, that is a reason for depositions of the government official.  Navarro might be deposed in any appeal of the OCTG case to the Court.

On March 13, John Brinkley of Forbes in an article entitled, “Commerce Secretary Ross Thinks U.S. Is In A Trade War”, which also addressed Navarro’s thinking, stated:

Commerce Secretary Wilbur Ross, responding to concerns that the Trump administration is pushing the United States toward a trade war, said we were already in one.

“We’ve been in a trade war for decades,” he said last week in an interview with Bloomberg News. “That’s why we have the (trade) deficits.”

But not to worry, Ross said. “It’s not going to be a shooting war. If people know you have the big bazooka, you probably don’t have to use it.”

That’s the Luca Brasi negotiating method: bend to our will or we’ll blow you to smithereens. Peter Navarro, the head of the White House National Trade Council, recently suggested that future trade agreements include a rule stating that they can be renegotiated any time the U.S. runs a trade deficit with the partner country. That is, to put it mildly, a non-starter.

Ross’s and Navarro’s remarks are symptomatic of the Trump administration’s singular obsession with trade deficits. However, the fact that the United States has a global trade deficit does not mean we’re in a trade war. It doesn’t mean our trading partners are cheating us any more than that we’re cheating Canada and the United Kingdom by running trade surpluses with them. It means we import more than we export. One of the reasons for that is the strength of the dollar in foreign exchange markets. A strong dollar makes imports less expensive and exports more expensive. That, in turn, leads to more choices and lower prices for American consumers.

Navarro said in a recent speech that trade surpluses were synonymous with economic growth. History suggests otherwise. The U.S. economy added 235,000 jobs in February and the unemployment rate fell to 4.7%. The trade deficit in January (February not available yet) was $48.5 billion, the highest it’s been since March  2012.

The trade deficit decreased during the recession of 2008-09. The United States ran a trade surplus through most of the Great Depression.

Ross didn’t say who the enemy was in this supposed trade war, but President Trump has made it clear that he has it in for China and Mexico, our second and third largest trading partners, respectively. Our largest bilateral trade deficits are with those countries.

So, Trump intends to renegotiate NAFTA. And, he has threatened China with punitive tariffs. He has said doing these things would erase the U.S. trade deficit, cause a renaissance of American manufacturing jobs and bring the 3% GDP growth he promised.

They would do none of those things.

“Withdrawal from the Trans-Pacific Partnership, renegotiation of the North American Free Trade Agreement, and launching trade actions against China ensure political headlines, but they will not make much difference to the global U.S. trade deficit. Nor will they bring more jobs and higher wages to U.S. workers,” said Gary Clyde Hufbauer and Euijin Jung of the Peterson Institute of International Economics in an article published in February.

They also noted that the trade deficit is financed in part by foreign direct investment, which is unquestionably beneficial to the U.S. economy. Foreign-owned companies operating in the United States directly employ 6.1 million Americans, according to the U.S. Commerce Department. FDI stock in the U.S. stands at almost $3 trillion.

One way to reduce the trade deficit would be to devalue the dollar against the Chinese yuan and other currencies.  That would be politically difficult because it’s what Trump (wrongly) accuses China of doing on a regular basis. It would also raise the prices of imported food and manufactured goods and, possibly, cause inflation. That would hurt low-income Americans the most.

A better idea would be for the Trump trade triumvirate to calculate America’s balance of trade with its 20 free trade agreement partners. They would find that we have an aggregate trade surplus with them. Maybe then they’d reconsider their plans to renegotiate or withdraw from those agreements.

If Ross thinks we’re in a trade war now, let him propose raising tariffs against Mexico and China over and above the World Trade Organization’s Most Favored Nation rates. Then, we’d be in a trade war for real.

NAVARRO’S STANDING WITH CONGRESS DROPS

On March 16th, senior trade officials from the administration, minus Robert Lighthizer, headed up to Capitol Hill to talk with members of the House Ways and Means Committee about NAFTA, among other trade topics – marking the latest step in what one administration official described as a series of ongoing consultations between the administration and Congress before the White House formally moves to reopen the agreement.

The next step will be for the administration to formally notify Congress that its NAFTA  plans to begin talks, triggering a congressionally mandated 90-day consultation period before the renegotiation can start.

Commerce Secretary Wilbur Ross stated that the White House hopes to send that notification letter “sometime in the next couple of weeks,” meaning formal talks are likely to begin around early summer. Ross is expected attended the March 16th meeting, as did senior members of the Office of the U.S. Trade Representative including general counsel and acting USTR Stephen Vaughn, and deputy general counsel Maria Pagan.

Peter Navarro, however, did not go to the Capital Hill meeting. After a meeting with the Senate Finance Committee in February – which was described as “a disaster” – Navarro made such a poor impression that Senators viewed it as a reason for why they need to get USTR nominee Robert Lighthizer confirmed as soon as possible.  That meeting also spurred additional questions about who is really in charge on trade and led to strong reminders that USTR holds the statutory authority.

G-20 BECOMES MORE PROTECTIONIST

On March 18th, the trade protectionist rhetoric increased as it was reported that the G-20 member states dropped the no-protectionism pledge, which indicates more trade storms to come.  The G­20 is an informal forum on economic cooperation made up of 19 countries plus the European Union.  Finance ministers from the Group of 20 countries met in the southern German town of Baden­Baden and issued a statement saying only that countries “are working to strengthen the contribution of trade” to their economies.  In last yearʹs meeting under the Obama Administration, called on countries to resist “all forms” of protectionism, which can include border tariffs and rules that keep out imports to shield domestic companies from competition.

During the press conference, I was told that U.S. Treasury Secretary Steven Mnuchin, was peppered with questions about the border adjustment tax.  Munchin did state that trade deals need to offer a win-win scenario and went on to state:

“We believe in free trade: we are one of the largest markets in the world, we are one of the largest trading partners in the world.  Having said that, we want to re­examine certain agreements… And to the extent that agreements are old agreements and need to be renegotiated weʹll consider that as well.”

AGRICULTURE WAKES UP BECAUSE IT REALIZES HOW MUCH IT WILL LOSE WITH A PROTECTIONIST ANTI TRADE POLICY

In the past, many reporters have asked me what could China or other countries retaliate against.  The United States does not export much.  US exports are simply too small.  In the face of large trade deficits with China, Mexico and other countries in the manufacturing area, what is the US exporting that can be a retaliation target?

US trade data indicate that US exports for 2016 were over $1 trillion.  In the Robert Lighthizer confirmation hearings, you could hear the real concern of many Senators, especially from the agriculture states, that products from their states could be retaliation targets.  Their worry is certainly justified.

As Senator Pat Roberts stated at the Lighthizer Confirmation hearings:

“I’m going to try and demonstrate that we are going through a pretty rough patch in agriculture.  If Trump makes good on his promises to turn U.S. trade policy into a war against imports, “we are going to get into a very difficult situation.”

During the Confirmation Hearing, Roberts, Grassley and other Agriculture Senators extracted a pledge from Lighthizer that in negotiating trade agreements he would push agriculture interests to the top of the list. Senators and Congressmen from Agriculture states fear that if no new trade agreements are negotiated, US agriculture will lose market share and will become the retaliation target of other countries.

Mexico, in fact, is one of the largest buyers of US corn, much of which comes from Kansas and Iowa.  US exports about $2.4 billion in corn to Mexico.  Now Mexico is talking about retaliation and buying its corn from Brazil and Argentina.  What goes around comes around.

U.S. Senators and Congressmen noticed when a Mexican lawmaker introduced legislation favoring Latin American products over American- exported corn, a key winner in Nafta. That move followed warnings from Mr. Trump that Nafta would be renegotiated and Mexico would have to pay for a new border wall.  In response, Republican Senator Joni Ernst of Iowa stated:

“I have been worried because other countries have pushed back: ‘You want us to build a wall, well we’re not going to take your corn.’  If we’re talking about renegotiating Nafta, we actually stand to lose ground in agriculture—so we would really have to work that very, very carefully.”

On March 6th, leaders of the US Dairy industry were in Mexico to attempt and protect their exports from uncertainty over the future of NAFTA. After NAFTA was signed in 1994, American dairy exports to Mexico more than quadrupled to $1.2 billion, accounting for nearly one-fourth of all U.S. dairy exports last year. Because of Trump’s attacks on Mexico, it has encouraged Mexican importers to find other suppliers in the European Union and New Zealand, which are eager to get into the market, and in New Zealand’s case are part of the TPP.

In response to the criticism that Trump is putting his trade focus on the plight of the U.S. manufacturing sector at the expense of the export-dependent agriculture sector, on March 21st Trump pivoted to agriculture.  Sean Spicer, the President’s press secretary stated:

“While our farmers are the most efficient in the world, margins have been tightening, regulations have been multiplying, and exports, which has historically counted for over one- fifth of the U.S. farm production, have been declining due to unwise trade policies.  The President promised the many people in the agriculture industry and throughout rural America that he would not allow this to continue and he will continue to pursue policy changes that will reverse this disturbing trend.”

John Bode, president and CEO of the Corn Refiners Association praised the statement saying that Trump’s proclamation recognizes that “improved trade balances and a successful agriculture sector are inextricably linked.”  He further stated:

“Our industry’s exports not only deliver jobs at home, they are among America’s fundamental strengths abroad.  We are heartened to know that this White House agrees and that they will seek to increase agricultural exports as they examine existing and future trade agreements.”

Ray Starling, special assistant to the president for agriculture on the National Economic Council, recently stated at a National Ag Day event in Washington:

“The President has talked a lot about our manufacturing imbalance on trade, but that is not meant to neglect ag. That is essentially to say we know ag is doing a good job, we are making strides there, we need to do more.”

Now we have to wait and see if Trump truly means what he says or whether he wants a trade war, which will hurt US exports, especially in the agriculture area.

SENATORS AND CONGRESSMEN WANT MORE TRADE DEALS–BILATERAL VERSUS MULTILATERAL DEALS

Back on January 26, 2017 in an interview with Sean Hannity on Fox News, Trump explained that he did not like multilateral trade deals, such as the TPP, because they are a mosh pit and fall to the lowest common denominator.

During his confirmation hearing, Commerce Secretary Wilbur Ross stated that it easy to negotiate bilateral deals than multilateral deals.  But the question is, will it be easier to negotiate 12 bilateral deals with 12 different countries when one deal, the TPP, would have done it.  More importantly, although the US will renegotiate NAFTA and start trade deals with Japan and eventually Britain, is it truly realistic for the very small USTR to have continual negotiations with dozens of countries at the same time.  The TPP took 10 years to negotiate.  Maybe Ross is just playing a game and does not want more trade deals.

At a recent trade conference on March 13th here in Seattle held by the Washington Council on International Trade, however, it was very apparent that Washington State Congressmen, both Democrats and Republicans, want more trade deals.

At the Conference Congressman Dave Reichert, WA Republican, and Chairman of the Subcommittee on Trade, House Ways and Means, stated that the Trump Administration intends to do more bilateral deals.  He also stated that since NAFTA is a trilateral agreement, all three countries, Mexico, Canada and the US need to be at the table.

Reichert also stated that we cannot give up trade agreements because the cost would be too high.  China will benefit.  He also stated that the United States needs to set the international trade standards through trade agreements or China will do so and 95% of the World’s population and markets are outside US.

Reichert stated that the longer we wait to do trade deals, the more market shares we lose.  He pointed to the FTA with Korea, which dramatically reduced the 24% Korean tariff on cherries, and Washington State cheery exports doubled and Washington French Fries went up 53%.

When NAFTA took place US exports to Mexico doubled reaching $180 billion.  There is now over $500 billion in trade between US and Mexico

Following Reichert, Republican Congressman Dan Newhouse, who represents large Agricultural interests in the Center of Washington stated, “We cannot afford to waste any time as we create opportunities for local producers and exporters to gain access to new markets.”

Congressman Rick Larsen stated that the Administration has to decide whether it will do Border Adjustment taxes or trade deals.  Larsen went on to state that trade is much bigger than just agreements. It is soft power.  Asian countries see the US leading with military power, but the US relationship with the other Asian countries is less secure if the only relationship is military and not trade.

Democratic Congressman Denny Heck stated that TPP went too far too fast and was not politically possible.  Echoing Donald Trump, Heck stated that the white working man has seen no increase in income in 40 years.

But Newhouse stated that after the Korea FTA, Washington State potato growers saw an increase in exports of 670,000 tons of French Fries to Korea.  That is jobs.

On March 22nd, John Brinkley in an article entitled, Trump’s “Trade Policies Would Take From the Many and Give To a Few” points out the problem of relying only on bilateral agreements as compared to multilateral agreements:

“Politics can be defined as taking something from someone and giving it to someone else. Done right, the winners outnumber the losers and the sacrifice will have been worthwhile.

This seems lost on the Trump administration, whose trade proposals are likely to create a lot more losers than winners.

Let’s start with his plan to eschew multilateral trade agreements and negotiate only bilateral ones. With a multilateral agreement, like the Trans-Pacific Partnership, all parties play by the same rules. That means exporters don’t have to figure out what the rules of origin are country-by- country. They’re all the same.

Deciphering and complying with rules of origin under a free trade agreement are among the most difficult and time-consuming chores that exporting companies have to perform. If the rule says 70 percent of a truck’s parts have to have been made in the United States, the company has to go to its suppliers and say, where did the door handles come from? Where did the tires come from?

A lot of smaller companies find it isn’t worth the time and expense, so they ship the product and pay the tariff. Or they don’t export at  all.

Having a series of bilateral agreements makes it even harder, because each agreement would have its own rules of origin. American manufacturers were looking forward to ratification of the TPP, because it was to be a 12-country trading bloc with one set of rules. But Trump withdrew the United States from it.

Renegotiating NAFTA is another idea that would take from the many for the benefit of a few.

Breaking up NAFTA and negotiating separate bilateral agreements with Mexico and Canada would be even worse. U.S. Trade Representative nominee Robert Lighthizer said during his Senate confirmation hearing that the administration might take that course.

NAFTA has been in effect for 23 years. Whatever impacts it had on American employment and economic growth are well in the past. If you look under NAFTA’s hood, you see a complex network of supply chains crossing the three countries’ borders. They make it easy and cost-effective for American manufacturers to buy parts from Mexico or Canada and have them delivered quickly and duty-free.

About half of Mexico’s exports to the United States are parts for products that are built here – car parts, electronic components and so  on.

Making those parts more expensive would make the products they go into more expensive and would reduce the importing companies’ revenues, leading to lay-offs or worse. That is basic economics.

Trump said yesterday that renegotiating NAFTA was “going to be an easy one.” Everyone who has ever been a trade negotiator probably got a chuckle out of that. . .. .

“The United States has been treated very, very unfairly by many countries over the years, and that’s going to stop,” he said last week during a joint press conference with German Chancellor Angela Merkel.

Poor little us. We’re being pushed around by those mean bullies from South Korea and Mexico.

Nonetheless, the U.S. and global economies have been growing at a healthy pace. The U.S. unemployment rate is 4.7 percent, about as low as it can go, and median wages have finally started to increase for the first time since the recession of 2008.

This seems to call for an economic policy of caution and restraint to keep the recovery going rather than taking a machete to our trade agreements and punishing our trading partners for transgressions they have not committed.

That would harm vastly more Americans than it would help.

On February 28th, however, it was reported that the EU expects the Trump Administration to negotiate with the entire block as EU countries pushed back on Trump’s bilateral dreams.  European countries in the EU bloc have been unified against the Trump administration’s reported attempts to bring individual EU countries into direct, bilateral trade deals with the U.S. The EU ambassador at a recent National Press Club meeting stated that bilateral deals are “nonsense”.  David O’ Sullivan stated:

“It’s nonsense to talk about bilateral deals with countries that are part of a single market.  Would American companies really want 28 separate FTAs?”

In Germany, Martin Schäfer, spokesperson for the German foreign ministry, stated:

“The [European] Commission carries out trade negotiations and concludes trade agreements for Europe and for us. This is the legal status, about which we have nothing critical to say.  The new political constellation in the U.S. and elsewhere should not tempt anybody to take up a different position.”

European Trade Commissioner Cecilia Malmstrom also stated recently:

“The U.S. administration seems to favor bilateral relations over multilateralism. And some of the proposals we have seen floated, such as a border adjustment tax, could be at odds with WTO rules. Countries should be able to protect themselves from distortions and unfair trade practices. But that has to be done within the framework of the WTO. Global rules mean everyone playing fair, by a consistent, predictable and transparent rulebook.

In an age when some want to rebuild walls, re-impose barriers, restrict people’s freedom to move … we stand open to progressive trade with the world.”

On March 6th, a top European official stated that U.S. President Donald Trump’s protectionist stance may propel Asian, Middle Eastern and Latin American economic powers into market-opening alliances with the European Union.  Jyrki Katainen, a vice president of the European Commission, the EU’s executive arm, said Trump’s rejection of multilateral commercial deals and border-tax threat are giving impetus to the 28-nation bloc’s push for free- trade or investment pacts with countries including Japan, China, India, Saudi Arabia, the United Arab Emirates, Mexico, Brazil and Argentina.

Katainen stated that:

“When there has been some signals to raise protectionism, especially from the U.S. side, the rest of the world seems to be fighting back and saying that this is not our line, this is something which we don’t want. This is music to our ears.”

The comments signal that Trump’s “America First” approach that seeks to reduce the U.S.’s $502 billion trade deficit may be as much an opportunity as a threat to the EU.

Recently, the US equipment manufacturing industry, which supports more than 1.3 million jobs, expressed its concern about exports.  A report by the Association of Equipment Manufacturers stated that about 30 percent of the construction equipment and about 30 percent of the agricultural equipment manufactured in the United States is designated for export – and would therefore be hit hardest by any slowdown in global trade:

“Slow international growth combined with uncertainty about trading rules under the Trump administration could act as a drag on the equipment manufacturing industry’s overall performance.  Any steps the Trump administration might take to revisit or exit existing trade agreements could further complicate the challenging economic environment outside the United States.

It is difficult to precisely forecast how the Trump administration might rewrite existing trading rules, but any steps that make it more difficult for manufacturers to export their products could hinder growth in the industry.”

TPP CONTINUES WITHOUT THE US

On March 14th Government officials from the 12 Trans-Pacific Partnership nations minus the United States held a two-day summit in Chile to discuss a path forward on trade following the US decision to withdraw from the TPP.

New Zealand Trade Minister Todd McClay stated:

“I have recently visited Australia, Japan, Singapore and Mexico, met with ministers from Brunei and Malaysia and talked directly with trade ministers from all other TPP countries.  It is clear our partners remain committed to the benefits high quality trade agreements provide.”

Even though the TPP requires that at least six countries composing at least 85 percent of the entire TPP’s collective economic production, with the US withdrawal, the other 11 countries have decided to move forward with the TPP.  As Wendy Cutler, a former trade negotiator at USTR, stated:

“A TPP agreement without the U.S. is still relevant and would have significant economic value.  You’d still have four of the world’s 20 largest economies — Japan, Canada, Australia, and Mexico — alongside significant emerging economies, like Vietnam and Malaysia.”

In other words, other countries will replace US exports in those markets because they will have the benefit of the TPP.

After the meeting in Chile, Australian Trade Minister Steven Ciobo stated:

“I was particularly pleased there was continuing movement on the TPP.  Countries remain committed to exploring all the avenues and opportunities in relation to the TPP. There was broad agreement on the high level of ambition in the TPP being a benchmark and something we shouldn’t just let slip away.”

Japanese State Minister Takao Ochi stated:

“As long as Japan is concerned we don’t want to exclude any possible ways and we would like to take initiative in discussing with each of the member countries.”

The 11 countries will now work to preserve the trade deal’s innovations, which included new rules on digital trade, disciplines for state-owned companies and what have been touted as the toughest labor and environment protections of any modern trade agreement. The innovations also include new market access that countries negotiated on everything from milk powder to insurance services.

BORDER ADJUSTMENT TAXES

As stated in my last newsletters, the big issue in the trade area right now is border adjustment taxes and tax reform.  New Treasury Secretary Mnuchin says tax reform will take place in August 2017 and it is a priority for the Trump Administration.  Part of that reform is Border Adjustment Taxes (“BAT”).  See http://www.foxbusiness.com/politics/2017/02/23/treasury-secretary-mnuchin-lays-out-aggressive-timeline-for-tax-reform.html.  As Mnuchin states, a US deficit of $20 trillion, which was doubled by President Obama, is a concern, but more important is economic growth, which will result in more tax revenue.  To get economic growth, taxes and regulations have to be cut.

But with the failure of Obamacare in the House, taxes, including border adjustment taxes, move to the front of the Congressional calendar.  Trump and Republicans in the Congress, especially the House, appear to be moving ahead with an alternative to tariffs to spur US manufacturing and that is taxes.  There is now an attempt in Congress to give American-made products a big tax advantage over their foreign competitors through border adjustment taxes, and, in effect, counter the value added taxes used in other countries to deter imports.  As Kevin Brady, Chairman of House Ways and Means, argues, almost 80% of countries border adjust their taxes.  That includes Mexico, Canada, China, and the European countries, putting US exports at a substantial disadvantage.  For Brady’s argument, see videos at the following links, https://www.youtube.com/watch?v=1yYHGoFmNEk&feature=youtu.be and

https://waysandmeans.house.gov/icymi-chairman-brady-cnbc-makes-case-ending-made-america-export-tax/.

Under a border adjustment tax (“BAT”), a 20% tax would be applied against all domestic products and imported products.  But the domestic producer would be allowed to deduct all the domestic costs associated with producing that product.  Thus if a $100 product was produced in the US, the domestic producer could deduct $70 in costs, resulting in a 20% tax on $30 or a $6 tax.  But there would be no deduction of domestic costs for a $100 import resulting in a 20% tax on the full $100 or a $20 tax, giving the domestic product a 14% tax advantage.  The BAT would not apply to exports.

This proposal has welled up from the House of Representatives and is strongly supported by House Speaker Paul Ryan and the Chairman of House Ways and Means, Kevin Brady.  Their argument is that border adjustment tax is needed to offset value added taxes in other countries.  Brady argues that the BAT is the only way to end the “Made in America” tax.

One example given is that if an automobile is produced in the US and exported to Mexico, a 35% corporate tax is levied on the profits of the US automaker and then the US automobile is hit with a 16% value added tax when it comes into Mexico.  On the other hand, when an automobile is produced in Mexico for shipment to the US, there is no corporate tax on the export and no corresponding tax in the US on the Mexican export to the US.  In effect, Ryan and Brady argue that this is a tremendous incentive to move manufacturing out of the United States to countries with value added taxes, such as Mexico, China, Canada, EU and many other countries.

Border adjustments serve as a way to level the playing field and alter value-added consumption taxes many countries, including European countries, Mexico, Canada and China, impose on each stage of production, as products are sold internationally.  Proponents argue that the BAT is not trade policy and does not favor exports over imports.  To see the companies that have VAT taxes in place, see the Ways and Means website at https://waysandmeans.house.gov/ending-made-america-tax-three-major- wins-american-people/.

The Trade War in the Administration on border adjustment taxes has become clear as Bannon, Navarro and others are in favor, but Cohn and Treasury Secretary Mnuchin are opposed.  Wilbur Ross is on the fence.  Trump himself has not taken a position.

On March 25th During a morning interview, Mnuchin said he had been overseeing work on the administration’s tax bill over the past two months and it would be introduced soon. He said the goal was still to win Congressional approval of the tax measure by August. But if the timeline is delayed, he said he expected the proposal to pass by the fall.  Mnuchin did not reveal whether the administration will include the Border Adjustment tax.

On March 9th Bloomberg reported that the BAT is in deep trouble.  The BAT is important because it is expected to raise more than $1 trillion in revenue, which would offset the cut to corporate tax rates:

Companies that rely heavily on exports, such as Boeing Co. and Oracle Corp., love the plan—for obvious reasons. Beyond profits, they also say a BAT would make American manufacturers more competitive by putting them on equal footing with foreign competitors around the world.

Importers hate the BAT. Big retailers such as Walmart Stores Inc. and Best Buy Co. contend that border adjustments will dent profit margins and force them to raise prices on everything from avocados and furniture to Nike shoes and French cheese. In a Feb. 28 letter to congressional leaders, the Americans for Affordable Products coalition said the tax would raise consumer costs “by as much as $1,700” in the first year. . . .

Companies are taking their message to consumers. In late February the National Retail Federation, which opposes the BAT, started airing TV commercials that parody an OxiClean infomercial, telling shoppers that “the all-new BAT tax is specially designed to make your disposable income—disappear!” Proponents, through the American Made Coalition that includes Johnson & Johnson and Pfizer Inc., launched a Twitter feed to support the tax. Both sides have created Facebook pages and websites with auto-form letters that viewers can send to Congress. Both, too, routinely pepper media outlets with press releases citing prominent people in the private sector and academia who either love or hate it.

As Bloomberg further states in Congress the BAT is running into opposition from Republicans:

A core group of House Republicans has come out in recent weeks against the BAT, citing the higher prices they’d inflict on consumers. Republican Senate support is in doubt, too. Tom Cotton, a Republican from Walmart’s home state of Arkansas, told a Senate floor session on Feb. 15 that border adjustments are “a theory wrapped in speculation inside a guess.” The next day, Senate Majority Whip John Cornyn, a Texas Republican, said, “The hard reality is the border tax is on life support.”

But as Bloomberg further states:

“Ryan and Brady aren’t backing down. Without border adjustments, they say, their plan to rewrite the tax code can’t happen. That $1.1 trillion in revenue is crucial to the politics of the BAT, since it helps keep it deficit- neutral, a prerequisite for passing a tax bill through the Senate without Democratic votes. “What it boils down to is that it’s a way to pay for the rest of the tax plan,” says Veronique de Rugy, an economist at George Mason University. “Only revenue comes from this feature—economic growth doesn’t.” That $1 trillion is also crucial to how the BAT might affect the economy. Says Ross, “That is way too big a number to get wrong.”

EUROPE, THE WTO AND CHINA

Meanwhile, other countries are lining up to retaliate if the BAT is passed.  On February 28th, it was reported that the EU is preparing a legal challenge against Donald Trump’s US border tax plan in what could be biggest trade dispute in a century.  Jyrki Katainen, the European Commission’s Vice President, told the newspaper: “If someone is behaving against our interests or against international rules in trade then we have our own mechanisms to react.”  He said the EU was seeking to avoid a potential trade war with the US as it would be “disastrous” for the world economy.

“We have all the legal arrangements within the EU but we are also part of global arrangements like the WTO and we want to respect the global rule base when it comes to trade.”

One WTO trade dispute expert estimated that a defeat in such a case could see around $385bn a year in trade retaliation against the US.  Volker Kauder, parliamentary floor leader of Merkel’s conservatives, also recently stated:

“If Donald Trump imposes punitive tariffs on German and European products, then Europe should also impose punitive tariffs on U.S. products.”

Meanwhile, the Chinese government has been seeking advice from think tanks and policy advisers on how to retaliate against trade penalties imposed by the US.  China’s strongest responses would likely include finding alternative suppliers of agricultural products, machinery and manufactured goods, and reducing the number of consumer goods like cellphones and laptops that it exports to the United States. Other possibilities could include levying a tax or other penalty on major U.S. companies that do business in China or restricting access to the country’s services sector.

NAFTA RENEGOTIATION

The first trade agreement, which the Trump Administration will negotiate is NAFTA.  President Trump has already formally notified both Canada and Mexico that he intends to renegotiate NAFTA.  The negotiations will probably start sometime this summer.

On March 12, 2017, Commerce Secretary Wilbur Ross stated that the Trump administration has yet to determine what the trade agreement replacing NAFTA will look like.  As Ross stated:

“One size doesn’t fit all.  The issues of automotive are not the same as the issues of agriculture; they’re not the same as the issues of electronics, or steel. It’s a very, very complicated situation. So it’s very hard to paint just with one big broad brush.”

On March 16, 2017, Canadian Prime Minister Trudeau stated:

“NAFTA’s been … improved a dozen times over the past 20 years. There’s always opportunities to talk about how we can make it better. It has led to a lot of great jobs for a whole lot of people on both sides of the border and I very much take him [Trump] at his word when he talks about just making a few tweaks. Because that’s what we’re always happy to do.

“We’ve got auto parts crisscrossing the border six times before they end up in a finished product. You’ve got over $2 billion a day going back and forth. So, making sure that the border is … secure but also smooth in its flow of goods and people is essential to good jobs on both sides of the border.”

Meanwhile, there are a number of meetings between US, Canadian and Mexican officials preparing for the NAFTA negotiations.

On March 21st, the Trump administration created the attached list, KEY ELEMENTS, of more than 20 foreign trade practices it would like to address in a renegotiation of NAFTA and in any bilateral trade deal it might pursue.  The list includes relatively new areas like foreign currency manipulation, where achieving agreement could be difficult, but also a host of others like intellectual protection that have long been mainstays in U.S. trade agreements.  Payne Griffin, deputy chief of staff at the Office of U.S. Trade Representative, stated:

“These are market problems that the administration has identified either through vigorous consultations with Congress or their own internal research.  It is a non-exhaustive list of things that may be addressed in these bilateral trade agreements.”

CHINA NONMARKET ECONOMY

China has initiated a mandatory 60-day consultation period with both economies before deciding to request a dispute settlement panel to hear its complaint.  China has now decided to only target the EU, which is in the process of trying to change antidumping methodology. Brussels is trying to come up with a new way of treating China under its trade remedy law while still recognizing that Beijing intervenes heavily in its economy.

The United States has said it would only consider a change in response to a formal request from China to be treated as a market economy, something it has not done since 2006.

Apparently, China is trying a strategy of ‘divide and conquer’.  Take on the EU first, because it is already revising its law and they might get a good WTO decision, then face the tougher battle against the U.S.”

MORE TRADE CASES COMING

A law firm that specializes in bringing antidumping (“AD”) and countervailing duty (“CVD”) trade cases recently told me that they are in the process of preparing a number of new cases against China and other countries.  With a sympathetic Trump Administration and a very sympathetic Wilbur Ross as the new Secretary of Commerce, more cases are going to be filed.

ALUMINUM FOIL FROM CHINA

On March 9, 2017, the US Aluminum Foil Trade Enforcement Working Group, including Aleris Inc., Alpha Aluminum, Golden Aluminum, Granges Americas Inc., JW Aluminum Company, Novelis Corporation, Republic Foil Inc., Reynolds Consumer Products, and United Aluminum Corporation, filed major AD and CVD cases against more than $658 million of aluminum foil imports from China in 2016.

The petition alleges duties ranging from at a minimum of 38 percent to a high of 134 percent and targets 232 Chinese exporters and producers of aluminum foil.  The aluminum foil covered by the complaint covers household aluminum foil as well as aluminum foil used in cookware, product packaging and heat exchangers found in cars and HVAC systems.

US importers can be liable for CVD duties on aluminum foil imports from China as soon as August 6, 2017 and AD duties on October 5, 2017.

Attached are the relevant parts of the AD and CVD complaints along with a list of the targeted Chinese exporters/producers and US importers, 2017.03.08 CHN-ALUMINUM FOIL Petition Vol I 1Narrative IMPORTERNAMES.  If anyone has any questions, please feel free to contact me.

SILICON METAL FROM AUSTRALIA, BRAZIL, KAZAKHSTAN AND NORWAY

Although the US industry may believe AD and CVD petitions will move the Chinese imports share to the US industry, that is not necessarily the case.  Case in point, on March 8, 2016, Globe Specialty Metals Inc. filed major AD and CVD cases against imports of Silicon Metal from Australia, Brazil, Kazakhstan and Norway.  Chinese silicon metal has been under an AD order with shut out rates since 1991.

Attached are the relevant parts of the AD and CVD complaints along with a list of the targeted foreign exporters/producers and US importers, SMALL SILICON METAL PETITION.

The first hearing at the ITC is March 29th.  Commerce will issue questionnaires probably in the first week of April.  Commerce Department preliminary determinations in the Countervailing Duty cases, which is when liability for importers begins, can happen as soon as August.

If anyone has any questions, please feel free to contact me.

With a sympathetic Trump Administration in power, there will be a sharp rise in AD and CVD cases against China and other countries.

TRADE ADJUSTMENT ASSISTANCE FOR FIRMS/COMPANIES – A BETTER ALTERNATIVE TRADE REMEDY WHICH ACTUALLY WORKS

Previous newsletters stated Wilbur Ross has made it very clear to reach the 3% plus growth rate, the US must increase exports.  Yet, at the same time, the Trump Administrations keeps concentrating on deficits and accusing foreign governments of treating US companies unfairly.  Trump and his Administration do not look internally and try to find ways to make the US companies more competitive, which will not create a trade war.

The Trade Adjustment Assistance for Firms/Companies program does not put up barriers to imports.  Instead the TAA for Companies program works with US companies injured by imports to make them more competitive.  The objective of TAA for Companies is to save the company and by saving the company it saves the jobs that go with that company.

In contrast to TAA for workers, TAAF or TAA for Companies is provided by the Economic Development Administration at the Commerce Department to help companies adjust to import competition before there is a massive lay-off or closure.  Yet the program does not interfere in the market or restrict imports in any way.

Right now the total cost to the US Taxpayer for this nationwide program is $12.5 million dollars—truthfully peanuts in the Federal budget.  Moreover, the Federal government saves money because if the company is saved, the jobs are saved and there are fewer workers to retrain and the saved company and workers end up paying taxes at all levels of government rather than being a drain on the Treasury.

As stated in my last blog post, TAA for Firms/Companies works.  In the Northwest, where I am located, the Northwest Trade Adjustment Assistance Center, http://www.nwtaac.org/, has been able to save 80% of the companies that entered the program since 1984. The Mid-Atlantic Trade Adjustment Assistance Center, http://www.mataac.org, uses a video, http://mataac.org/howitworks/, to show in detail how the program resulted in significant turnarounds for four companies. The reason the TAA for Firms/Companies is so successful—Its flexibility in working with companies on an individual basis to come up with a specific adjustment plan to make them competitive once again in the US market as it exists today.  For a sample recovery plan, see http://mataac.org/documents/2014/06/sample-adjustment-plan.pdf, which has been developed specific to the strengths, weaknesses and threats each company faces.

But as also stated in my last blog post, in this environment with so many injured companies, funding for TAA for Firms/Companies has to be increased so it can do its job.   Moreover, with the threats of a massive trade war in the air, which will injure all US companies and destroy US jobs, the US government needs to look at an alternative—TAA for Firms/Companies is that alternative.

FOREIGN ANTIDUMPING AND COUNTERVAILING DUTY LAW AND CASES

UNIVERSAL TRADE WAR CONTINUES

With the election of Donald Trump, as stated in my last blog post, the Universal Trade War will continue.  In addition to the US bringing AD and CVD cases, countries around the World, such as EC, Canada, Mexico, Brazil, Argentina, India, Turkey, Ukraine, Russia, China, Indonesia, Malaysia, Korea, Japan, Taiwan, Australia, Thailand, South Africa, and Vietnam, all are filing antidumping and countervailing duty cases against each other and the United States.  These countries have adopted the US law which finds dumping in 90% of the cases.  The US and the EC have created a Frankenstein in the antidumping law and the whole World has adopted it.

Compromise is the best way to settle trade disputes, but it is very difficult, if not impossible, to settle US antidumping and other trade cases.  What is “fair” trade for the United States is “fair” trade for every other country.  Many countries want to make their industries Great again.

Because of this situation, this part of the newsletter will concentrate on trade cases in other countries and how other countries see the trade problem with the United States.  It will also discuss potential US exports that can be retaliation targets.

MEXICO

On March 6, 2017, Alexandro N. Gomez-Stozzi, a Mexican trade lawyer, at the Gardere firm in Mexico City sent me the following summary of Antidumping and Countervailing Duty Investigations in Mexico:

Mexican Antidumping and Countervailing (AD/CVD) Investigation Procedures Factsheet

  • AD/CVD investigations in Mexico may take from 12 to 18 months as of the publication in the Diario Oficial regarding the initiation of investigation. Terms within the investigative process may be extended with cause, at the discretion of the authority. Investigations are generally conducted as follows (variation of a chart created by Mexican authorities):
  • There is a single investigating authority, the Ministry of Economy´s International Trade Practices Unit (known by its Spanish acronym UPCI, for Unidad de Prácticas Comerciales Internacionales). UPCI makes all relevant findings: (i) dumping or countervailing, (ii) material injury or threat thereof and (iii) causation. Final AD/CVD orders are signed by the Minister of Economy; although informally, trade policy considerations in other sectors come into play before deciding to issue an AD/CVD order. UPCI is also in charge of safeguard investigations.  
  • Investigations are usually requested by Mexican producers representing at least 25% of the total production, although UPCI may initiate investigations if it deems so appropriate.
  • Exporters and importers of affected goods are strongly encouraged to retain Mexican counsel, as all appearances have to be made in Spanish and a domestic service address has to be designated.
  • When issuing a preliminary determination, the authority may: (1) impose a preliminary AD/CVD duty and continue with investigation, (2) continue the investigation without an AD/CVD duty, or (3) terminate the investigation on insufficient evidence grounds.
  • In its final determination, the authority may (i) confirm or modify its preliminary determination to impose an AD/CVD duty, or (2) declare the investigation concluded without imposing an AD/CVD duty. Under stringent circumstances, final determinations may impose retroactive duties for up to three months from date of publication of the preliminary determination.
  • During the course of an investigation, Mexican law allows for interested parties to ask UPCI to convene conciliatory meetings, at which proposals may be presented to resolve the case and terminate the investigation. These proceedings coexist with Antidumping Agreement´s price undertakings.
  • AD/CVD orders remain in effect for 5 years. They may be renewed for similar periods when warranted after a sunset review which covers both dumping (or countervailing) and injury.  Circumvention, actual coverage of AD/CVD orders, and similar proceedings can also be initiated as long as orders are in effect.
  • World Trade Organization (WTO)´s Antidumping and Subsidies Agreements are applied as is in Mexican investigation proceedings. Mexican trade-remedy law and regulations may sometimes be contradictory with WTO agreements; in case of conflict, the WTO Agreements would prevail in court.

CHINA AD/CVD NEWSLETTERS

Attached are newsletters from Chinese lawyer Roland Zhu and his trade group at the Allbright Law Office about Chinese trade law, Team’s newsletter-EN Vol.2017.09.

CFIUS—WILL INVESTMENT RECIPROCITY BE A NEW REQUIREMENT??

There is movement within the United States to establish investment reciprocity as a criteria in investigations by the Committee on Foreign Investment in the United States into its national security reviews of inbound transactions, a policy shift that would weigh the heaviest on Chinese buyers if enacted.

Investment reciprocity — the idea that the U.S. should block a foreign entity’s investment in a particular industry when a U.S. buyer would be similarly blocked in that entity’s country — has been on politicians’ radar since before Donald Trump took office.

Trump made no secret of his leanings on the campaign trail, criticizing in particular a Chinese investment group’s acquisition of the 130-year-old Chicago Stock Exchange, a deal that has since been cleared by CFIUS.

If the U.S. does decide to go this route, there are at least a couple ways the government could go about it. The President could direct CFIUS to focus more heavily on particular industries or use a broader definition of national security, as long as those directives don’t stray too far from the regulations dictated by the Foreign Investment and National Security Act of 2007, or FINSA. Congress can also amend FINSA to expand either the range of industries susceptible to national security review, or even expand the review itself from one focused solely on national security to a review that more broadly considers foreign investments in the U.S.

CHINESE MILITARY BUILDUP TO PROTECT ITS TRADE INTERESTS???

As mentioned in prior blog posts, there is a close relationship between defense/security and trade.  The Japanese attack on Pearl Harbor was created, in part, by the US naval embargo of Japan.

One of the strongest arguments for the Trans Pacific Partnership was the geo-political argument that the TPP would bring us closer to the Asian countries.  Former defense secretary Ash Carter stated at one point that the TPP was equivalent to another US aircraft carrier.

On March 15, 2017, Malia Zimmerman for Fox News in an article entitled “China next US threat? Beijing beefs up military to protect trade”, stated:

With a laser-like focus on protecting its lifeblood – trade – China is dramatically altering its military operations, creating specialized teams that can protect its maritime resources, routes and territorial expansion plans. . . .

Harry Kazianis, director of the Washington, D.C.-based Defense Studies for The Center for the National Interest, stated:

“The great Achilles heel of China is trade—especially natural resources that come via sea and into its ports—and a big reason it will inevitably become a globally deployed military power. Beijing’s armed forces are working to slowly but surely reinforce and protect its overseas hubs as well as trade routes that move from Europe, the Middle East and Africa and into China’s territorial waters.”

ZTE HIT WITH SANCTIONS FOR VIOLATING EXPORT CONTROLS ACT

On March 7, 2007, in a notice and judgement, which will be attached to my blog, judgment 3-22ZTE Corporation Agrees to Plead Guilty and Pay Over $430, the US Justice Department announced that ZTE Corp, has agreed to plead guilty and pay a combined a penalty of $1.1.9 billion for violating U.S. sanctions by sending U.S.-origin items to Iran.  As the Justice Department notice states:

ZTE Corporation has agreed to enter a guilty plea and to pay a $430,488,798 penalty to the U.S. for conspiring to violate the International Emergency Economic Powers Act (IEEPA) by illegally shipping U.S.-origin items to Iran, obstructing justice and making a material false statement. ZTE simultaneously reached settlement agreements with the U.S. Department of Commerce’s Bureau of Industry and Security (BIS) and the U.S. Department of the Treasury’s Office of Foreign Assets Control (OFAC). In total ZTE has agreed to pay the U.S. Government $892,360,064. The BIS has suspended an additional $300,000,000, which ZTE will pay if it violates its settlement agreement with the BIS. . . .

“ZTE Corporation not only violated export controls that keep sensitive American technology out of the hands of hostile regimes like Iran’s – they lied to federal investigators and even deceived their own counsel and internal investigators about their illegal acts,” said Attorney General Sessions. “This plea agreement holds them accountable, and makes clear that our government will use every tool we have to punish companies who would violate our laws, obstruct justice and jeopardize our national security.  . . .”

“ZTE engaged in an elaborate scheme to acquire U.S.-origin items, send the items to Iran and mask its involvement in those exports. The plea agreement alleges that the highest levels of management within the company approved the scheme. ZTE then repeatedly lied to and misled federal investigators, its own attorneys and internal investigators. Its actions were egregious and warranted a significant penalty,” said Acting Assistant Attorney General McCord. “The enforcement of U.S. export control and sanctions laws is a major component of the National Security Division’s commitment to protecting the national security of the United States. Companies that violate these laws – including foreign companies – will be investigated and held to answer for their actions.”

“ZTE Corporation not only violated our export control laws but, once caught, shockingly resumed illegal shipments to Iran during the course of our investigation,” said U.S. Attorney Parker. “ZTE Corporation then went to great lengths to devise elaborate, corporate-wide schemes to hide its illegal conduct, including lying to its own lawyers.”

“The plea agreement in this case shows ZTE repeatedly violated export controls and illegally shipped U.S. technology to Iran,” said Assistant Director Priestap. “The company also took extensive measures to hide what it was doing from U.S. authorities. This case is an excellent example of cooperation among multiple

U.S. agencies to uncover illegal technology transfers and make those responsible pay for their actions.”

The plea agreement, which is contingent on the court’s approval, also requires ZTE to submit to a three- year period of corporate probation, during which time an independent corporate compliance monitor will review and report on ZTE’s export compliance program. ZTE is also required to cooperate fully with the Department of Justice (DOJ) regarding any criminal investigation by U.S. law enforcement authorities.  . . .”

According to David Laufman, chief of the counterintelligence and export control section at the DOJ’s National Security Division, it was “extraordinarily difficult” to obtain key documents and witnesses located in China until on March 7, 2016, the Commerce decision to add ZTE to the so-called Entity List.  According to Laufman, “The game-changing event in this case, was the Commerce Department’s decision to pursue an entity listing of ZTE, demonstrating the efficacy of the whole-of- government approach” to national security.

Companies end up on the Entity List after Commerce determines they are tied to illicit weapons programs, terrorism or other national security threats, and thereafter can’t trade with U.S. companies without a special dispensation from the agency.

This may be the first case in which the Commerce Department has used an Entity List designation to force a foreign company to cooperate in a probe.  Commerce will probably start using this strategy in future investigations.

SECTION 337 AND IP CASES

DOMESTIC INDUSTRY FROM PATENT LICENSEE

On March 8, 2017, the US International Trade Commission (“ITC”) issued the attached interesting decision, 2 PAGE ONE PAGE DI, in the Section 337 case Certain Silicon-On-Insulator Wafers.  In that decision, the ITC Administrative Law Judge determined that it could find a domestic industry in a Section 337 if the US patent licensee’s activities show domestic activity.  Even though the patent holder was a non-practicing entity, the ALJ determined:

Silicon Genesis Corporation (“SiGen”), has established contingently a domestic industry in the United States through the activities of its licensee, SunEdison Semiconductor Limited (“SunEdison”) . . . through its licensee, SunEdison, SiGen has proven by a preponderance of evidence that it has made a significant domestic investment in plant and equipment, in capital and labor, and a substantial investment in research and development to produce certain silicon-on-insulator (“SOI”) products at issue in this Investigation.

The decision did not break new ground, but it reminds nonpracticing entities, (“NPEs”) that one way to meet the domestic industry requirement under Section 337 is through the actions of patent licensee in the United States.

NEW 337 CASES AGAINST CHINA

On March 10, 2017, in the attached ITC notice, Intravascular Sets, Curlin Medical, Inc., Moog, Inc., and Zevex, Inc. filed a section 337 case against imports of Intravascular Administration Sets from Yangzhou WeiDeLi Trade Co., Ltd., China.

If you have any questions about these cases or about Trump and Trade, border adjustment taxes, US trade policy, the antidumping or countervailing duty law, trade adjustment assistance, customs, False Claims Act or 337 IP/patent law, please feel free to contact me.

Best regards,

Bill Perry

US CHINA TRADE WAR–UNIVERSAL TRADE WAR, TPP IN LAME DUCK, SPOTTING POTENTIAL AD CASES, CUSTOMS, FALSE CLAIMS ACT, VITAMIN C ANTITRUST, IP AND 337

Lotus Garden Boat Buildings Yue Feng Pagoda Summer Palace BeijinTRADE IS A TWO WAY STREET

“PROTECTIONISM BECOMES DESTRUCTIONISM; IT COSTS JOBS”

PRESIDENT RONALD REAGAN, JUNE 28, 1986

US CHINA TRADE WAR OCTOBER 7, 2016

INTERVIEW ON WHAT US COMPANIES CAN DO IN THE PRESENT TRADE CRISIS

Just did an interview on what US companies can do to cope with the current trade crisis.  Hope you will find it of interest.  http://www.turbineagency.com/industry-insights/2016/10/25/accelerateb2b-how-do-global-trade-deals-really-impact-us-businesses

Dear Friends,

This blog post contains several new article and articles that have been posted on the Harris Moure blog, www.chinalawblog.com from the HM Trade Practice Group, including Adams Lee, Emily Lawson and myself.  The new articles also reflect my discussions during my recent three-week trip to China meeting with various Chinese companies, the Chinese Ministry of Commerce (“MOFCOM”), and Chinese trade lawyers.

The most important point is that the US China Trade War is expanding and has now become a universal trade war.  Although the US continues to bring numerous antidumping (AD) and countervailing duty (CVD) cases against China, the Chinese government is now bringing and will bring numerous AD and CVD cases against the US.

In the recent Chinese antidumping case against Distiller Grains from the US, the Chinese government has levied a 33% rate against $1.6 billion in US exports to China.  There are rumors that the Chinese government may soon bring AD and CVD cases targeting $15 billion in US exports of soybeans to China.

Meanwhile numerous countries have adopted their own AD and CVD laws modeled on the US and EU and are bringing cases not only against China, but also against the US.

The only recent trade developments that would break the retaliation cycle are the Trans Pacific Partnership (TPP) and the TTIP deal with Europe and both trade agreements are in serious trouble.

In addition, set forth below are articles on how to spot an AD and CVD trade case coming and what do when your company is a target of a trade case, magnesium and steel cases, trade cases against Europe, and Trade Adjustment Assistance by David Holbert, who heads the Northwest Trade Adjustment Assistance Center.  In addition, there are a number of articles on Customs law, False Claims Act, including an FCA case against Furniture and Customs enforcement action against Honey.  Finally, there is an article on recent Second Circuit Decision in the Vitamin C Antitrust Case and the antidumping back story, a Criminal Trade Secrets case, a new 337 case and the Section 337 article translated into Chinese.

If anyone has any questions or wants additional information, please feel free to contact me at my new e-mail address bill@harrismoure.com.

Best regards,

Bill Perry

TRADE POLICY AND TPP

US CHINA ANTIDUMPING TRADE WAR IS NOW A UNIVERSAL ANTIDUMPING TRADE WAR

As Donald Trump and Hilary Clinton duel during the Presidential debate about who can be more protectionist, during my recent trip to China I learned that what was once a US China Trade War has now become a universal trade war.  Country after country have adopted the US and EC Antidumping law and are filing case after case against other countries and the US.

Thus countries, such as EC, Canada, Mexico, Brazil, Argentina, India, Turkey, Ukraine, Russia, China, Indonesia, Malaysia, Korea, Japan, Taiwan, Australia Thailand, South Africa, and Vietnam, all are filing antidumping and countervailing duty cases against each other and the United States.  These countries have adopted the US law which finds dumping in 90% of the cases.  The US and the EC have created a Frankenstein in the antidumping law and the whole World has adopted it.

Although Donald Trump, Hilary Clinton and many US politicians want to adopt a mercantilist trade policy which favors pushing exports and protecting US industries from imports, the US politicians simply do not understand retaliation.  What the US can do to other countries, those countries can do back.  President Reagan understood the retaliation danger of protectionism and a mercantilist trade policy, but many present day US politicians do not.  So all of these countries are following the US lead and implementing a mercantilist trade policy.

Free trade agreements, such as the TPP and the TTIP, which would break this cycle are now all in deep trouble as each country wants to put its industries first and make their country and industries great again.  The rise in nationalism results in trade wars in which country after country will fire trade guns against each other.  As Jack Ma of Alibaba recently mentioned on CNN, real wars start when trade stops.  See http://money.cnn.com/2016/09/02/technology/jack-ma-alibaba-g20/

During my recent trip to China, in the attached notice, ddgs-list-of-dumping-margin-of-each-company_en ddgs-preliminary-finding-summary-translation_en, on September 23, 2016, the Chinese government announced a 33% preliminary antidumping duty targeting $1.6 billion in imports from the United States of DDGS, Distiller’s Dried Grains with or without Solubles, which is used as an ingredient for animal feed.

During this trip, officials at the Chinese Ministry of Commerce (“MOFCOM”) told me that more trade cases will be coming next year against the US.  In fact, there are rumors that the Chinese government will soon bring an AD and CVD case targeting $15 billion in US soybean exports to China.  This is the number one US export to China.  Now that China is bringing more trade cases against the US, these cases will hurt US companies and the jobs that go with them.

On the US side, the election of either Donald Trump or Hilary Clinton in November will mean more US trade cases next year against not only China, but many other countries as well.

On September 22, 2016, MOFCOM in China initiated an escape clause/safeguard action against Sugar from Brazil, Cuba, Guatemala, Australia, South Korea and Thailand alleging tariffs up to 155.90%.

On September 15, 2016, India brought its own antidumping case against Polybutadiene Rubber from South Korea, Russia, South Africa, Iran and Singapore.

Taiwan has brought a Steel antidumping case against China.

More and more cases will be filed in 2017 around the World and many will target the United States, China, and numerous other countries.  Compromise is the best way to settle trade disputes, but it is very difficult, if not impossible, to settle US antidumping and other trade cases.  What is “fair” trade for the United States is “fair” trade for every other country.  Many countries want to make their industries Great again.

TPP IN THE LAME DUCK KEEPS ON TICKING

As mentioned in my last blog post, I believe that if Hilary Clinton is elected, President Obama will push for the Trans Pacific Partnership (“TPP”) to come up for a vote during the Lame Duck Session.  Many Congressional leaders appeared to  oppose tbringing up TPP in the Lame Duck.  But with Hilary Clinton’s resurgence in the Polls after the first debate, there is more talk about the TPP coming up in the Lame Duck, the period after the Presidential election and before the end of the year, as President Obama pushes hard for passage of the legislation.

On September 16, 2016, Ohio Governor Republican John Kasich in an interview with CNN stated that he supports passage of the TPP and will support President Obama in this legislative push in the Lame Duck.  See http://edition.cnn.com/2016/09/15/politics/john-kasich-trans-pacific-partnership/index.html

Governor Kasich made clear that he feels “it’s his “responsibility and duty as a leader” — no matter the political cost — to help President Barack Obama push the Trans-Pacific Partnership through Congress.

Kasich stated that

“I have never been an ideological supporter of free trade. The ideologues used to come to me and be frustrated with me.  But when you look at these agreements in a real sense – and this one is much different than even NAFTA.”

Kasich added that when Russian and Chinese leaders oppose the TPP, that is one reason to vote for the TPP, “We have to do this.”

Kasich further stated,

“This is the first time the candidates in both major political parties say they are opposed to free trade. It’s astounding to me.  I welcome the fact that people will criticize me for putting my country ahead of my party.”

The interview came after Kasich met with President Obama in the Oval Office with former New York City Mayor Michael Bloomberg, former George W. Bush administration Treasury Secretary Hank Paulson, Atlanta Mayor Kasim Reed and others for a meeting on the 12-nation Pacific Rim deal.

Kasich further stated:

“This is an opportunity for the Congress to carry out its responsibility. Frankly, if I have to come down here and spend some time lobbying my Republican colleagues, I’m more than glad to do that.

There’s definitely some people I can call and talk to.  This is a big deal. I mean, if we were to just walk away with this — with both candidates saying they don’t want this — we turn our backs on Asia.

He also played down the political potency of Trump’s anti-trade position in manufacturing-heavy Ohio, saying it’s not why Trump might win the state.

On September 26, 2016, Robert Samuelson, a well-known economist, published an article entitled “Will TPP Rise from the Dead”, stating:

With Obama’s term ending and his already-modest influence eroding by the day, TPP seems dead. But it may still be in intensive care.

In a speech to the Peterson Institute for International Economics, a Washington think tank, Rep. Kevin Brady, R-Texas, chairman of the House Ways and Means Committee whose jurisdiction includes trade agreements, said that the TPP could still be ratified in the lame-duck session after the election and before a new Congress takes office.

Samuelson went on to state that Brady gave two major reasons to approve the TPP.

First, geopolitical:  The TPP would enhance US influence in the Pacific region and offset China’s growing economic and political power. TPP would give the United States a major role in regulating global commerce in the 21s century. The trade agreement codifies rules on “intellectual property” (patents, copyrights), data flows and state-owned firms

Ratification would be a strong signal to Asia that the United States intends to remain a Pacific power.

“The second reason is economic: Asia remains a fast-growing region. TPP would eliminate most tariffs among the 12 member countries, aiding American exporters in these markets. The advantage may be particularly important in services (tourism, consulting, finance and engineering), where U.S. firms are especially strong. In 2015, the United States had a $762 billion deficit in goods trade (machinery, steel, medical equipment) and a $262 billion surplus in services trade, leaving an overall deficit of $500 billion.  According to the Peterson Institute, the 12 countries in the TPP accounted for about 36% of the world economy and 24% of global trade in 2014.”

Samuelson goes on to quote Brady on why he does not dismiss TPP’s prospects as bleak, “People change once they get into office.”

Samuelson then states:

Translation: The campaign’s anti-trade and anti-globalization rhetoric might recede before the realities of governing. Although Brady didn’t say so, one implication is that a victorious Hillary Clinton might put up only token opposition to TPP, both because the case for approval is strong and because she might feel obligated to Obama for his political support.

But Brady went on to state that getting a deal would be difficult. With many Democrats adamantly opposed to TPP, President Obama would need to rely on Republicans to approve the agreement. But if President Obama cannot round up enough Democratic votes to ensure victory, Republicans will not go out on a political limb and bring the agreement up during the Lame Duck.

“We are running out of time,” Brady told the Peterson audience. As Samuelson stated, “The TPP may yet wind up in the political morgue.”

TRADE

CHINA IMPORTS: KNOW YOUR RISKS

By Adams Lee, Harris Moure International Trade Group

Every year U.S. producers file 10-15 petitions asking the U.S. government to investigate whether certain products imported into the US are sold at unfair prices (antidumping or AD) or are unfairly subsidized (countervailing duty or CVD). Many of the AD/CVD cases target products imported from China. Odds are good that at least two new AD/CVD petitions will be filed by Halloween and as many as five by year end.

Our clients often ask our international trade lawyers how they can determine the likelihood of a AD/CVD petition that could adversely affect their ability to compete in the US market. Each AD/CVD petition is unique to the product and industry it covers, but most AD/CVD investigations fall within a handful of categories. Understanding what has led to the filing of previous AD/CVD petitions can help you as a producer, exporter, or importer, recognize if and when to expect a new AD/CVD petition that could directly affect you. The following are some of the indicators you should be checking to determine whether your imported into the USA product will be next.

The Regulars. Certain domestic industries have been frequent filers of AD/CVD actions. Companies in these industries are veterans of AD/CVD actions; they don’t ask if a new petition will be filed, only when it will be filed.

  • Steel of all types (carbon steel, stainless steel, flat products, pipe, rebar, wire rod, wire, etc.) from all over the world. The latest wave of steel AD/CVD investigations are being completed with high AD/CVD margins in most cases.
  • Softwood Lumber from Canada. The latest round of the US-Canada Lumber wars is set to begin as new AD/CVD petitions are likely to be filed in October 2016. Filing a new AD/CVD petition may be necessary to push US-Canada negotiations to a meaningful level.

The Big Box Effect. When Walmart, Lowes, or Target switch their sourcing of a product from a domestic manufacturer to a foreign (read Chinese) one, it is quite common for the jilted domestic supplier to file an AD/CVD petition in an effort to save their business. Boltless steel shelving units, wood flooring, ironing tables, and candles are all examples of this, and all involving products from China.

US Products Squeezed by Imports. It is not uncommon for an AD/CVD petition to be filed by a US producer that makes a higher quality product but is starting to lose out to foreign producers with lower quality but cheaper products. Frozen shrimp from multiple countries, garlic from China, and wooden bedroom furniture from China are some examples of this.

Pressure from Downstream Customers. Many AD/CVD petitions involve products that are material inputs used to make a downstream finished product. Petitions can be triggered by larger downstream producers switching to, or just threatening to switch to imports to pressure smaller upstream suppliers to lower prices.  Many chemical products from China, tire products from China and other countries, kitchen racks from China are examples of this.

AD/CVD Actions on Upstream ProductsSometimes AD/CVD actions filed by other domestic industries trickle down and harm downstream domestic industries. For example, US wire rod producers filed AD/CVD petitions that resulted in AD/CVD duties against imported wire rod. But these wire rod duties ended up hurting US wire producers, who in turn filed their own AD/CVD duties against imported wire.

Dying Dinosaurs/Last Survivors. Some AD/CVD petitions are filed by the remaining members of a nearly extinct domestic industry dealing with decreasing demand and increased import pressure. Sometimes the AD/CVD actions allow the surviving US producers to stay in the US market protected from import competition.  Examples of this are wooden bedroom furniture, magnesium and innersprings from China.

Other Countries’ AD/CVD actions. The US is not the only country that acts to protect its domestic industries from unfair foreign trade. AD/CVD actions filed in Canada, India, the EU, Brazil, and even China are warning signs of industries facing tight competitive pressure. Imports blocked from one market are often diverted to other available markets. A prime example of this are products from China which first had AD/CVD filed in the EU before the US took action.

All of the above scenarios are good indicators of an imminent filing of a new United States’ AD/CVD petition, so if you are seeing these market conditions in your industry, an AD/CVD petition is probably in your near future.

WHAT SHOULD YOU DO WHEN THE CUSTOMS ANTIDUMPING AND COUNTERVAILING DUTY BOGEYMAN IS COMING AFTER YOUR IMPORTED CHINA PRODUCTS

By Adams Lee, Harris Moure International Trade Group

In China Imports Know Your Risks (above), I wrote about how companies can recognize impending antidumping (AD) or countervailing duty (CVD) petitions. In this post I address what you as an importer, exporter or foreign producer should do if you see an AD/CVD storm looming.

The first thing you should do is determine whether the AD/CVD petition will directly hit your primary operations. The second thing you should do is figure out how best to defend yourself interests if the AD/CVD petition is headed directly your way. The third thing you should do if you do get hit by AD/CVD duties is to figure out damage control going forward.

  1. New AD/CVD Petition – Are my products affected? AD/CVD petitions include a proposed scope definition that identifies the products covered. AD/CVD scope definitions can be complicated and unclear. They may be broader or narrower than the Customs tariff classifications normally used to identify such imports. Even if you think your products are outside the scope of the petition, U.S. Customs may disagree. U.S. Customs commonly demands that you first pay an AD/CVD deposit, assuming that your products are within the scope of the AD/CVD petition, and then Customs will return your deposit only if you get a Department of Commerce (DOC) ruling that your products are actually outside the scope. For example, with aluminum extrusions from China, the DOC has received around a hundred scope ruling requests to clarify whether certain products are included or excluded from the scope of that order.

Once you know the scope definition, you can evaluate the degree to which the AD/CVD action could impact your business.  Sometimes you and your customer can find alternatives to replace the subject AD/CVD products with either non-subject products or by your sourcing from non-subject countries. If you have options to switch away from the products covered by the AD/CVD action, it may not be necessary to participate in the AD/CVD investigation.

  1. AD/CVD investigations – How to defend? If your product is squarely within the scope of the AD/CVD petition and the U.S. market is worth fighting for, you should determine the best way to prepare for the AD/CVD investigation. If you have enough time before a petition is filed, you theoretically can try to adjust your sales to remedy whatever is causing the dumped or subsidized sales, most commonly by raising your prices for certain products or customers or by modifying your production operations by lowering or reallocating costs. Unfortunately, most companies are not proactive about planning to avoid AD/CVD actions and instead react only after a petition is filed. We find this especially true of our clients that import from China, as opposed to Europe.

Once an AD/CVD investigation is initiated, foreign producers and exporters and US importers should try to defend their interests before the two agencies responsible for making AD/CVD determinations: The International Trade Commission (ITC) determines whether a domestic industry is injured or threatened with injury by reason of the subject imports and the Department of Commerce (DOC) determines how much the subject imports are dumped or subsidized.

In ITC investigations, the best defenses are presented when the foreign producers, US importers, and US purchasers can organize and explain why the subject imports should not be blamed for any decline in the domestic industry’s performance. Because the ITC examines a broad range of data regarding the US market for the subject product, a comprehensive explanation of relevant market conditions is necessary to a winning argument.

In DOC investigations, the foreign producer and exporters are the primary respondents to the DOC’s questionnaires. These companies must provide extensive corporate structure, sales and cost data, often through multiple rounds of questionnaires. The DOC uses the submitted data to calculate AD/CVD margins.  Unaffiliated US importers usually do not need to submit data in DOC investigations and reviews, but they often will closely monitor the DOC’s proceedings because they will ultimately be responsible for paying the AD/CVD duties. See Sourcing Product From China: You Should Know About Importer of Record Liability.

The key to any AD/CVD defense is participating fully in both the DOC’s and the ITC’s investigations. If you don’t participate, you have no chance of winning. If a party does not respond on time or with complete responses, the DOC and the ITC can apply the adverse facts available that inevitably lead to higher AD/CVD margins. US importers should at least actively monitor DOC’s proceedings because their final AD/CVD liability often depends on how well the Chinese producers and exporters are able to respond to DOC’s questionnaires. It is not uncommon for the Chinese producer or exporter to mount a weak or no defense, leaving the U.S. importer essentially “holding the bag.” There are many things you can and should do to try to prevent this from happening to you.

  1. How to Plan for Life with AD/CVD. The overwhelming majority of AD/CVD petitions lead to orders for imposing AD/CVD duties.  But depending on the scope definition of the AD/CVD order, it may be possible for you to maintain your business operations by identifying alternative out-of-scope products or by switching your product sourcing to a non-subject country. But in switching sourcing, US importers should be careful to avoid actions that could be considered schemes designed primarily to evade AD/CVD duties, as the DOC can extend orders through circumvention investigations. Customs too can conduct its own investigation of duty evasion allegations.

Also, because the United States uses a retrospective AD/CVD system, foreign suppliers and US importers have the opportunity each year to try to lower their dumping margin. Since AD/CVD duties are “remedial”, foreign producers and U.S. importers have ample opportunity to adjust their production and sales operations so that they can sell “fairly” to the U.S. market, as defined by the U.S. trade laws and with proper planning and disciplined execution, companies can sometimes make even minor adjustments to reduce or eliminate their AD/CVD duty liability.

Bottom Line: You are not without defenses when the AD/CVD bogeyman appears to be heading for you. There are things you can do both to stop it from attacking your business and things you can do to restore your business once attacked.

Editor’s Note: This post focuses on products exported from China to the United States, but its advice applies with equal force to products exported from any other country to the United States and with nearly equal force to products exported from any other country to any other country that also has AD/CVD sanctions.

CAFC MAGNESIUM METAL DECISION

On October 6, 2016, in the attached decision, cafc-magnesium, the Court of Appeals for the Federal Circuit affirmed the Commerce Department’s decision that replacement of stainless steel retorts used to produce magnesium metal was an overhead expense and not a direct cost in the Magnesium Metal from China antidumping case.

STEEL TRADE CASES

CARBON AND ALLOY STEEL CUT-TO-LENGTH PLATE FROM CHINA AND KOREA

On September 7, 2016, in the attached fact sheet, clt-plate-cvd-prelim-fs-090716, Commerce issued an affirmative preliminary CVD determination in the initial investigation of certain carbon and alloy steel cut-to-length plate from China and a negative preliminary determination in the CVD investigation of imports from Korea.

China CVD rate best on all facts available is 210.50% and Korea’s CVD rate is 0.

CARBON AND ALLOY STEEL CUT-TO-LENGTH PLATE FROM BRAZIL, SOUTH AFRICA AND TURKEY

On September 16, 2016, in the attached fact sheet, factsheet-multiple-ctl-plate-ad-prelim-091616, Commerce announced its affirmative preliminary determinations in the AD investigations of imports of certain carbon and alloy steel cut-to-length plate from Brazil, South Africa, and Turkey.

Brazil’s antidumping rate is 74.52%.  South Africa’s antidumping rates range from 87.72% to 94.14%.  Turkey’s antidumping rates range from 42.02% to 50%.

STAINLESS STEEL SHEET AND STRIP FROM CHINA

On September 12, 2016, in the attached fact sheet, factsheet-prc-stainless-steel-sheet-strip-ad-prelim-091216, Commerce announced its affirmative preliminary determination in the AD investigation of imports of stainless steel sheet and strip from China.  The antidumping rates range from 63.86% to 76.64%.

TRADE CASES AGAINST EUROPE

EUROPEAN TARGETS IN ANTIDUMPING AND COUNTERVAILING DUTY CASES AND WHAT CAN BE DONE TO GET BACK IN THE US MARKET AGAIN

Recently, there have been several articles about the sharp rise in AD and CVD/trade remedy cases in the last year.  By the second half of 2016, the US Government has reported that twice as many AD and CVD cases have been initiated in 2015-2016 as in 2009.

China is not the only target.  AD cases have been recently filed against a number of European countries, including Carbon and Alloy Steel Plate from Austria, Belgium, Germany, and Italy; Steel Flanges from Italy and Spain; and Rubber from Poland.

In addition, there are outstanding AD and CVD orders against Germany on brass sheet and strip, seamless pipe, sodium nitrite and non-oriented electrical steel.  In addition to Germany, other EU Countries have been hit on various steel products, including a number of stainless steel products, from Spain, Belgium and Italy; brass sheet and strip from France and Italy, isocyanurates from Spain, pasta from Italy, paper from Portugal and Uranium from France. The oldest US AD order in place today is pressure sensitive plastic tape from Italy, which was issued in 1977.

Under US law Commerce determines whether dumping is taking place.  Dumping is defined as selling imported goods at less than fair value or less than normal value, which in general terms means lower than prices in the home/foreign market or below the fully allocated cost of production.  Antidumping duties are levied to remedy the unfair act by raising the US price so that the products are fairly traded.

Commerce also imposes Countervailing Duties to offset any foreign subsidies provided by foreign governments so as to raise the price of the subsidized imports.

AD and CVD duties can only be imposed if there is injury to the US industry, which is determined by the ITC.  But in determining injury, the law directs the ITC to cumulate, that is add together all the imports of the same product from the various foreign countries.

The real question many companies may have is how can AD and CVD rates be reduced so that the European company can start exporting to the US again.  US AD and CVD laws are considered remedial, not punitive statutes.  Thus, every year in the month in which the AD or CVD order was issued, Commerce gives the parties, including the domestic producers, foreign producers and US importers, the right to request a review investigation based on sales of imports that entered the US in the preceding year.

Thus, the AD order on electrical steel from Germany was issued in December 2014.   In December 2016, the German producer can request a review investigation of the electrical steel that entered, was actually imported into, the US during the period December 1, 2015 to November 31, 2016.

EU companies may ask that it is too difficult to export a 17 metric ton container of covered product to the US, requesting a nonaffiliated importer to put up an AD of 50 to over 100%, which can require a payment of $1 million USD or more.  In contrast to European law, however, the US AD and CVD law is retrospective.  Thus the importer posts a cash deposit when it imports products under an AD or CVD order, and the importer will get back the difference plus interest at the end of the review investigation.

More importantly, through a series of cases, Commerce has let foreign producers export smaller quantities of the product to use as a test sale in a review investigation if all other aspects of the sale are normal.  Thus in a chemical case, we had the exporter put a metric ton of the chemical in question in a container with other products and that metric ton served as the test sale to establish the new AD rate.

EU Companies may also ask how we can make sure that we are not dumping.  The answer is dump proofing and computer programs.  In contrast to China, EU companies are considered market economy companies and, therefore, Commerce must use actual prices and costs in the European country to determine whether it is dumping or not.  Computer programs can be used to reduce the dumping margin significantly by modeling US prices and EU home market prices to eliminate or significantly reduce antidumping rates.

How successful can companies be in reviews?  In one EU Steel case, we dropped the dumping rate from over 17% in the initial investigation to 0% in the review investigation.  In a chemical from China case, we dropped a dumping rate of over 200% to 0%, allowing the Chinese company to become the exclusive exporter of the product for decades per order of the US government.

Playing the AD and CVD game in review investigations can significantly reduce AD and CVD rates and get the EU company back in the US market again

TRADE ADJUSTMENT ASSISTANCE FOR FIRMS/COMPANIES

David Holbert, who heads the Northwest Trade Adjustment Assistance Center (“NWTAAC”), is writing a series of posts on the NWTAAC website on how Trade Adjustment Assistance for Firms/Companies helps injured companies injured by imports.  This is the first post.

Imports are Like a Thousand Flash Floods Injuring US Companies That Are Not Competitive

The issue of trade competition and lost jobs is well discussed in the media.  I work with small and medium-sized enterprises (SMEs) who are negatively affected by trade competition, what is often called “trade impact” in policy lingo. It’s a big issue. According to the U.S Trade Representative, the United States’ 30 million SMEs account for nearly two-thirds of net new private sector jobs in recent decades.

For large companies or from a macro-economic perspective, import competition may seem like a rising tide – one that can be anticipated, prepared for or proactively mitigated. For small and medium-sized businesses, not equipped with diverse product lines, resources or change acumen, import competition feels more like a flash flood.

What is it like for those companies?  When trade impact hits, sales drop off, often suddenly.

  • Contract manufacturers build to specification for customers, often larger companies. For this group, trade impact could mean the loss of a major customer moving operations to a foreign country (and finding parts suppliers there), or simply an importer arriving on the scene with lower cost products.
  • For a consumer products company, trade impact will probably first arrive with falling sales to the big retail chains since they are the most sensitive to supplier prices.
  • For a commodity producer things are a little more predictable. There may be a change in currency valuation or the rise of a new industry in a foreign country. Regardless, these highly price sensitive markets will suddenly have a lower price option.
  • Commercial products producers will usually have more time. When imports arrive they will sell to generally more informed customers who usually value factors other than price. But the fall will come, just more slowly.

Sales could fall off for many reasons. How do you know its trade related? You ask or you ask around. It shouldn’t take long to find out.

Imports arrive product by product. Companies move offshore factory by factory.  A domestic company makes that product, is part of the supply chain needed to make the product or is part of that commodity industry. When the imports arrive (or the factory moves), that one company or set of suppliers or community of producers is directly in the way. All of this happens in what can seem to be a relatively normal looking manufacturing neighborhood. Across the street there might be a company making another product that is experiencing no trade competition. Next door a third company might have gone through trade impact years ago and has adjusted. For small and medium sized companies, trade impact can be surprisingly direct and specific.

Here are some examples of what I’m talking about.

  • A commercial products company makes a specialized tool. A couple of other U.S. and European companies make similar products with some parity between price and features. One year they are at the big industry trade show and see a product, similar to theirs (and the others), but priced about 40% lower. Three months later sales started slipping.
  • A contract manufacturer that machines metal parts had gravitated away from stainless steel to titanium and built for several competitors in the same industry. Foreign producers had mastered stainless steel over the last decade. But as of a recent year, those producers finally mastered titanium as well. One by one, the manufacturer’s customers started buying imports. Once one did, it had a cost advantage, so the others had to go along also.
  • A nut grower was maintaining a slim profit. Then, a certain country decided to incentivize its nut growers to achieve more efficiency and export capability. It took a while, but when the imported nuts started arriving, they were at a price point below break-even for the domestic producer.
  • A safety products producer sold through a variety of retailers. One year, seemingly out of the blue, the big box stores stopped ordering. It didn’t take long to figure out why. A similar imported product was on the shelves at about half the price.

In future posts I’ll cover the steps to recovery. They are many effective tools in the economic recovery toolbox.  In many cases, companies that employed these resources are now unrecognizable through increased scale and product changes. Interestingly, a surprising number become significant exporters.

My role at the Northwest Trade Adjustment Assistance Center is to help small and medium-sized companies that are negatively impacted by trade competition through grants of up to $75,000.  Our non-profit organization administers a federal program serving companies in Washington, Oregon, Idaho and Alaska. You can learn more about us at NWTAAC.org.

CUSTOMS LAW

IMPORTING GOODS FROM CHINA: THE RISKS ARE RISING

By Adams Lee, Harris Moure International Trade Group

Last month I wrote about how importers from China need to be on their guard since U.S. Customs and Border Protection (CBP) has implemented new regulations to investigate allegations of antidumping (AD) and countervailing duty (CVD) evasion. See Importing From China: One More (New) Thing You Need To Know.

It didn’t take long, as U.S. Customs has already begun its first wave of investigations: Wheatland Tube, a US steel pipe producer, on September 14, 2016 announced it had filed with CBP an allegation of duty evasion on imports of Chinese circular welded steel pipe.

CBP has published a timeline for conducting its investigations and a process diagram (EAPA Investigation Timeline) and this newly filed allegation will be a test case to see how CBP will conduct its new duty evasion investigations. Hopefully, CBP will soon address many of the questions raised by the new regulations. How will parties be allowed to participate? What information from the investigation will be made public? How will CBP define “reasonable suspicion” of duty evasion?

This steel pipe investigation is likely to be the first of many CBP duty evasion investigations that are to come, many (probably most) of which will target Chinese products subject to AD/CVD duties. For how to figure out the risk quotient for the products you import from China, check out China Imports: Know Your Risks.

The new antidumping and countervailing duty regulations will unquestionably require an increased number of importers and foreign manufacturers to formally respond to CBP’s questions in response to allegations. Given the strong political pressure by domestic U.S. industries calling for tougher enforcement of US trade laws (not to mention the rising opposition to free trade among the American populace), Chinese producers and exporters and US importers should be prepared for increased CBP activity. CBP is likely looking to punish someone hard to set an example of their improved enforcement.

Getting Your China Products Through U.S. Customs: The 101

By Emily Lawson, Harris Moure International Trade Group

If you are importing products from China you need to do your homework to make sure your incoming shipments into the United States comply with U.S. Customs laws and regulations. Compliance with U.S. Customs laws and regulations is critical in avoiding your shipments being detained or seized, and/or penalties assessed. Common issues importers of products from China typically face include the following:  

  Not determining proper classification and duty rate for products. If you plan to import and sell on a Delivered Duty Paid basis, you should consider customs duties in your costs and that means you should know all of your applicable duty rates before you import. Also certain products are subject to high antidumping or countervailing duties in addition to regular customs duties, which may be as high as 300%.

   Failing to mark the product with the country of origin of manufacture.  Generally goods of foreign origin for import into the U.S. or immediate containers of the goods must be marked legibly and in a conspicuous location with the country of origin in English. Failure to do so accurately  can result in civil and even possibly criminal penalties.

  Not properly marking wood packing material. All wood packing material for products imported into the U.S. must be properly  treated and marked prior to shipping. Failure to meet the treatment and marking requirements may cause shipments to be delayed and penalties issued. 

  Failing to provide complete commercial invoices. Customs regulations provide that specific data must be included on the commercial invoice for U.S. Customs purposes, including a detailed description of the merchandise, and correct value information. Omission of this information may result in improper declaration to U.S. Customs at the time of import and expose you to penalties.

  Failing to meet other U.S. Government agency requirements.  Goods imported for sale in the U.S. must satisfy the same legal requirements as those goods manufactured in the United States. U.S. Customs enforces the laws of other agencies in the U.S., including, the Food and Drug Administration, the Consumer Product Safety  Commission (CPSC), and the Environmental Protection Agency, in addition to others. Therefore, if toys, for example, are exported to the U.S., detailed CPSC requirements, including for testing, must be met prior to export.

   Distribution of many trademarked and copyrighted items. Items which are trademarked and copyrighted are restricted by contractual agreements that give exclusive rights to specific companies to distribute the product in the U.S. Imports of improperly  trademarked or copyrighted items can be seized at the U.S. border and can subject you as the importer to penalties.

 Taking the time to identify  the required U.S. Customs laws and regulations for the products to be shipped to the U.S. from China will help you maintain seamless delivery  of your merchandise to U.S. customers and avoid civil and criminal penalty  exposure.

FALSE CLAIMS HAMMER GETS BIGGER — THIRD CIRCUIT HOLDS FCA’S APPLICATION TO FALSE STATEMENTS MADE TO US CUSTOMS

On October 5, 2916, the Third Circuit Court of Appeals  in the attached decision in United States ex rel Customs Fraud Investigations, LLC. v. Vitaulic Company, us-vs-vitaulic, reversed the Federal District Court and held that a failure to label imported goods with the proper country of origin is actionable under the False Claim Act (“FCA”).  Vitaulic had imported millions of pounds of steel pipe with the wrong country of origin.

In holding that this is an actionable claim under the FCA, the Court stated:

These actions, according to CFI, give rise to the present qui tam action under the so-called “reverse false claims” provision in the False Claims Act (FCA).  Typically, a claim under the FCA alleges that a person or company submitted a bill to the government for work that was not performed or was performed improperly, resulting in an undeserved payment flowing to that person or company. The FCA was enacted as a reaction to rampant fraud and price gouging by merchants supplying the Union army during the Civil War. In this case, by contrast, the allegation is not that Victaulic is obtaining monies from the government to which it is not entitled, but rather that it is retaining money it should have paid the government in the form of marking duties. Wrongful retention cases such as these are known as “reverse false claims” actions.

The Court went on to state:

Of particular importance here, the Senate Report discussed “customs duties for mismarking country of origin,” and how such duties would be covered by the amended reverse false claims Provision. . . .

The plain text of the FCA’s reverse claims provision is clear: any individual who “knowingly conceals or knowingly and improperly avoids or decreases an obligation to pay or transmit money or property to the Government” may be subject to liability. As alleged by CFI in the amended complaint, Victaulic declined to notify the Bureau of Customs and Border Protection of its pipe fittings’ non-conforming status. This failure to notify resulted in the pipe fittings being released into the stream of commerce in the United States and, consequently, marking duties being owed and not paid.

From a policy perspective, the possibility of reverse false claims liability in such circumstances makes sense in the context of the larger import/export regulatory scheme created by Congress. Because of the government’s inability to inspect every shipment entering the United States, an importer may have an incentive to decline to mention that its goods are mismarked on the assumption that the mismarking will not be discovered. In doing so, an importer avoids its obligation under 19 U.S.C. § 1484 to provide the government with such information as is necessary to enable the Bureau of Customs and Border Protection to determine whether the merchandise may be released from government custody or whether it must be properly marked, re-exported or destroyed.

HONEY AND FURNITURE

FURNITURE

On September 30, 2016, Ecologic Industries LLC and OMNI SCM LLC controlled by a Daniel Scott Goldman agreed to pay $1.525 million to settle a civil False Claims Act suit alleging it conspired to make false statements to avoid paying duties on wooden furniture imported from China to avoid the antidumping duties on Wooden Bedroom Furniture from China.  The companies sell furniture for student housing.

The case was filed by a whistleblower Matthew Bissanti, who is the former president and director of OMNI.  The Justice Department reported that Bissanti will receive $228,750 as his share of the settlement.

HONEY

On Aug 12, 2016, in the attached notice, to-bee-or-not-to-bee_-cbp-and-partners-seized-132-drums-of-hone, Customs and Border Protection announced seizure of 42 tons of illegally imported Chinese honey.  The honey was contained in 132 fifty-five gallon drums that were falsely declared as originating from Taiwan to evade antidumping duties applicable to Chinese honey. The evaded antidumping duties on this shipment of Chinese honey would be nearly $180,299.

ANTITRUST LAW

VITAMIN C ANTITRUST CASE—THE REAL ANTIDUMPING BACK STORY

On September 20, 2016, the Second Circuit Court of Appeals handed down its attached decision in the Vitamin C Antitrust case against the Chinese companies, In Re: Vitamin C Antitrust Litigation, vitamin-c-13-4791_opn-2d-cir-sept-20-2016.  In its decision, the Court of Appeals reversed the Federal District Court’s decision that the Chinese Vitamin C companies had fixed prices in violation of the US antitrust because Chinese government action, in effect, insulated the Chinese companies from US antitrust liability.

The Court of Appeals made the correct decision because as indicated below, I have personal knowledge as to the reason the Chinese government set the Vitamin C export price scheme in place to raise Chinese export prices—to deter US and other Antidumping cases.

As the Court of Appeals stated in its opinion:

the Chinese Government filed a formal statement in the district court asserting that Chinese law required Defendants to set prices and reduce quantities of vitamin C sold abroad, and because Defendants could not simultaneously comply with Chinese law and U.S. antitrust law . . .

The Court of Appeals then reversed the District Court “on international comity grounds” and ordered the District Court to dismiss the complaint with prejudice.

In effect, the Second Circuit held that based on comity grounds, that is, respect for Chinese law as evidenced by a formal statement and submission of the Chinese government that the Chinese government lawfully set up a scheme to raise Vitamin C prices, the Federal District Court should have dismissed the case.  The Court of Appeals held that the District Court should have deferred to the Chinese government and exempted the Chinese companies from the application of the US antitrust law based on the state action defense.  It should be noted that the Federal Government and State Governments through state action can insulate US domestic companies from the application of the US antitrust law.

The Court of Appeals specifically determined in the decision that:

The official statements of the Ministry should be credited and accorded deference. . . .The  2002  Notice,  inter  alia,  demonstrates  that  from  2002  to  2005,  the relevant time period alleged in the complaint, Chinese law required Defendants to participate in the PVC regime in order to export vitamin C. This regulatory regime allowed vitamin C manufacturers the export only vitamin C subject to contracts that complied with the “industry‐wide negotiated” price.

Although the 2002 Notice does not specify how the “industry‐wide negotiated” price was set, we defer to the Ministry’s reasonable interpretation that the term means what it suggests—that members of the regulated industry were required to negotiate and agree upon a price.  . . ..

In this context, we find it reasonable to view the entire PVC regime as a decentralized means by which the Ministry, through the Chamber, regulated the export of vitamin C by deferring to the manufacturers and adopting their agreed upon price as the minimum export price. In short, by directing vitamin C manufacturers to coordinate export prices and quantities and adopting those standards into the regulatory regime, the Chinese Government required Defendants to violate the Sherman Act. . . .

Because we hold that Defendants could not comply with both U.S. antitrust laws and Chinese law regulating the foreign export of vitamin C, a true conflict exists between the applicable laws of China and those of the United States.

The Court of Appeals went on to state:

Moreover, there is no evidence that Defendants acted with the express purpose or intent to affect U.S. commerce or harm U.S. businesses in particular. Rather, according to the Ministry, the regulations at issue governing Defendants’ conduct were intended to assist China in its transition from a state‐run command economy to a market‐driven economy, and the resulting price‐fixing was intended to ensure China remained a competitive participant in the global vitamin C market and to prevent harm to China’s trade relations. While it was reasonably foreseeable that China’s vitamin C policies would generally have a negative effect on Plaintiffs as participants in the international market for vitamin C, as noted above, there is no evidence that Defendants’ antitrust activities were specifically directed at Plaintiffs or other U.S. companies.

The purpose of the Chinese export scheme was not to damage US customers or businesses.  In fact, just the opposite was true.  The Chinese government wanted to keep exports flowing.

What was the concern of the Chinese government?  US and other antidumping cases, which could wipe Chinese exports out of the US market for decades.  This was the true number one anticompetitive threat that the Chinese government and companies were facing.  Was this a realistic threat?  Sure was.

The period that the export price scheme was set in place was 2002-2005.  On July 11, 2002, after losing an antidumping case in the mid-90s against Saccharin from China despite very high antidumping rates because of a no injury determination by the US International Trade Commission (“ITC”), PMC, the sole US producer of saccharin, filed a second antidumping case against saccharin from China.  The Chinese Chamber of Commerce in charge of the Saccharin case was the Chamber of Commerce for Medicines, the same Chamber in charge of the Vitamin C case.

On July 2, 2003, the Commerce Department issued an antidumping order against all imports of saccharin from China with rates ranging from an individual dumping rate of 249.39% to 329.29% for all other Chinese companies, effectively blocking all Chinese saccharin from China.  The Antidumping Order was in effect for 10 years.

Although one company that I represented was after three and a half years able to reduce its dumping rate down to 0%, all other Chinese saccharin was blocked out of the US market for 10 years.  Market prices for saccharin in the US soared from a low $1.50 per pound in the investigative period to a price well over $10 a pound.

And US plaintiff companies in the Vitamin C case were complaining about the price rise in Vitamin C exports to the US??!!  I am sure the increase was not 10 times.

Since I represented the Chinese saccharin industry in the Saccharin antidumping case, the Chamber of Commerce for Medicine and I were very aware of the devastating effect a US or other antidumping case could have on Chinese companies and exports.  After the antidumping order was issued, in the Summer of 2003 the Chamber called me to a meeting with the Chinese Vitamin C producers and the Chinese Ministry of Commerce (“MOFCOM”} to discuss how to deter US and other antidumping cases.  The Chamber and MOFCOM were very worried that intense Chinese price competition would lead to a wave of antidumping cases against the Vitamin C companies.

The Vitamin C companies, the Chamber and MOFCOM asked what can we do if there is a threat of an antidumping case.  Since Commerce and all other countries treat China as a nonmarket economy country and refuse to use actual prices and costs in China to determine antidumping cases, the general practice of dump proofing where antidumping consultants use computer programs to eliminate the unfair act, dumping, is not an option for Chinese companies.

The only remedy I could think of was that the Chinese government impose an export price floor.  That approach worked in the 90s with another Chamber of Commerce when there was a threat of a US antidumping case against Silicon Carbide from China.  The US Silicon Carbide producer in the one company US industry never filed their threatened antidumping case against China because of the export price floor the Chamber with MOFCOM’s consent put in place.

After suggesting that the Chamber set up an export price floor with MOFCOM’s involvement, I went on to state that MOFCOM would have to issue a law, regulation or action to show that the Government mandated the establishment of the system to insulate the Chinese companies from attack under the US antitrust laws.

The Chamber did set up the export price system for Vitamin C exports to stop US and other antidumping cases from being filed against the Chinese companies.  No Vitamin C antidumping cases were filed because the export price system was put in place.

As indicated by the Second Circuit, MOFOM did take government action to set up the export price scheme, which, in turn, insulated the Chinese companies from US antitrust liability.

The lesson of the story is that although the purpose of US antitrust law is to protect consumers and competition in the US market, the real threat to US consumers and market competition is the US antidumping law.

CRIMINAL IP/TRADE SECRET CASE

On October 5, 2016, the Justice Department in the attached notice, chinese-national-sentenced-to-prison-for-conspiracy-to-steal-tr, announced the sentencing of Mo Hailong, a/k/a Robert Mo, a Chinese national to three years in Federal prison for a conspiracy to steal trade secrets.  Mr. Mo Hailong was the Director of International Business of the Beijing Dabeinong Technology Group Company, commonly referred to as DBN. DBN is a Chinese conglomerate with a corn seed subsidiary company, Kings Nower Seed.

According to the plea agreement, Mo Hailong admitted to participating in a long-term conspiracy to steal trade secrets from DuPont Pioneer and Monsanto. Mo Hailong participated in the theft of inbred corn seeds from fields in Iowa and elsewhere for the purpose of transporting the seeds to DBN in China. The stolen inbred, or parent, seeds were the valuable trade secrets of DuPont Pioneer and Monsanto.

U.S. Attorney Kevin E. VanderSchel stated:

“Mo Hailong stole valuable proprietary information in the form of seed corn from DuPont Pioneer and Monsanto in an effort to transport such trade secrets to China. Theft of trade secrets is a serious federal crime, as it harms victim companies that have invested millions of dollars and years of work toward the development of propriety technology. The theft of agricultural trade secrets, and other intellectual property, poses a grave threat to our national economic security. The Justice Department and federal law enforcement partners are committed to prosecuting those who in engage in conduct such as Mo Hailong.”

SECTION 337 AND IP CASES

NEW 337 CASES

On October 6, 2016, Nite Ize, Inc. filed a major 337 case against Device Holders, many of which come from China.  The relevant parts of the ITC notice along with the names of the Chinese respondent companies are below.

Commodity:

Device Holders

Filed by:

James B. Altman

Firm/Organization:

Foster, Murphy, Altman & Nickel, PC

Behalf of:

Nite Ize, Inc.

Description:

Letter to Lisa R. Barton, Secretary, USITC; requesting that the Commission conduct an investigation under section 337 of the Tariff Act of 1930, as amended, regarding Certain Device Holders, and Components Thereof. The proposed respondents are Shenzhen Youtai Trade Company Limited, d/b/a NoChoice, China; REXS LLC, Lewes, DE; Spinido, Inc., Brighton, CO; Luo, Qiden, d/b/a Lita International Shop, China; Guangzhou Kuaguoyi E-commerece co., ltd., d/b/a Kagu Culture, China; Shenzhen New Dream Technology Co., Ltd., d/b/a Newdreams, China; Shenzhen Gold South technology Co., Ltd. d/b/a Baidatong, China; Zhao Chunhui d/b/a Skyocean, China; Sunpauto Co., ltd., HK; Wang Zhi Gang d/b/a China; Dang Yuya d/b/a Sminiker, China; Shenzhen Topworld Technology Co.,    d/b/a IdeaPro, Hong Kong; Lin Zhen Mei d/b/a Anson, China; Wu Xuying d/b/a Novoland, China; Shenzhen New Dream Sailing Electronic Technology Co., Ltd., d/b/a MegaDream, China; Zhongshan Feiyu Hardware technology Co., Ltd d/b/a YouFo, China; Ninghuazian Wangfulong Chaojishichang Youxian Gongsi, Ltd., d/b/a EasybuyUS, China; Chang Lee d/b/a Frentaly, Duluth, GA; Trendbox USA LLC d/b/a Trendbox, Scottsdale, AZ; Timespa d/b/a Jia Bai Nian (Shenzhen) Electronic Commerce Trade CO., LTD., China; Tontex d/b/a Shenzhen Hetongtai Electronics Co., Ltd., China; Scotabc d/b/a ShenChuang Opto-electronics Technology Co., Ltd., China; Tenswall d/b/a Shenzhen Tenswall International Trading Co., Ltd., La Puente, CA; Luo Jieqiong d/b/a Wekin, China; Pecham d/b/a Baichen Technology Ltd., Hong Kong; Cyrift d/b/a Guangzhou Sunway E-Commerce LLC., China; Rymemo d/b/a Global Box, LLC., Dunbar, PA; Wang Guoxiang d/b/a Minse, China; Yuan I d/b/a Bestrix, China; Zhiping Zhou d/b/a Runshion, China; Funlavie, Riverside, CA; Huijukon d/b/a Shenzhen Hui Ju Kang technology Co., Ltd., China; Zhang Haujun d/b/a CeeOne, China; Easy Acc d/b/a Searay LLC., Newark, DE; Barsone d/b/a Shenzhen Senweite Electronic Commerce Ltd., China; Oumeiou d/b/a Shenzhen Oumeiou Technology Co., Ltd., China; Grando d/b/a Shenzhen Dashentai Network Technology Co., Ltd., China; Shenzhen Yingxue Technology Co., Ltd., China; Shenzhen Longwang Technology Co., Ltd., d/b/a LWANG, China; Hu Peng d/b/a AtomBud, China

CHINESE VERSION OF 337 ARTICLE

Set forth below is a Chinese version of the 337 English article published last month followed by the original English version.

阻止来自中国的侵权产品:337条款调查案

随着亚马逊和eBay加大力度引入中国卖家,以及越来越多的中国制造商另辟蹊径生产本身的产品,向我们在中国的律师咨询有关盗版产品和仿冒问题的公司数目也随之猛增。若该问题涉及到把侵权产品进口到美国,拥有美国知识产权的公司可以采取强大的补救措施进行反击。其中一个最强有力的补救措施就是337条款调查案,它可以用来阻止侵权产品进入美国,无论该产品生产自何处。

337条款调查案(该名称源自于19 U.S.C. 1337法令)可用来打击侵犯版权、商标、专利或商业秘密的进口品。但是由于注册商标和版权拥有人一般上可以采取其它的法律行动,337条款调查案对专利、未注册商标和商业秘密的拥有人尤其有效。虽然该调查案通常局限于知识产权,正在对钢铁产品进行的337调查案中,美国钢铁业试图将不公平行为的定义扩大以便将入侵计算机系统和违反反垄断行为包含在内。

首先,美国国际贸易委员会(“ITC”)会发起337条款的调查。如果ITC发现某进口货侵犯了特定的知识产权,可以发出排除令(exclusion order),美国海关就会扣留所有侵权的进口货。

大量种类各异的产品已经因337条款调查案而被禁止入口:从玩具(魔方拼图、椰菜娃娃)、鞋类(匡威运动鞋)、大型机器(造纸机)、消费类产品(首饰盒、汽车配件、电子香烟和烫发器)到高科技产品(电脑、手机和半导体芯片)等等。

337条款是知识产权和贸易的混合型法令,某个美国产业必须证明受到了伤害。伤害证明的要求很低,几乎所有的案例都符合此要求——只许一些销售损失就能证明伤害。对符合美国产业的要求可说是关键所在。美国产业通常是一家持有相关知识产权的公司。如果该知识产权是一项注册商标、版权或专利,美国产业的要求范围已扩大至凡在美国进行的工厂和设备、劳动力或资本的重大投资,以及专利权开发的实质性投资,包括工程、研发或授权许可,均可视为国内产业。然而,ITC最近提高了美国产业的要求,让专利“流氓”或非执业实体更难提出337调查案诉求。

337条款调查案由行政法官(ALJ)负责审理,诉讼过程迅速且激烈,一般上只需12至15个月来完成。ITC收到一份337调查的申请后,有30天的时间来决定是否立案。一旦确定立案,ITC会将诉状和调查通知答辩方。外国被诉方有30天的时间应诉,美国国内的被诉方则只有20天的时间应诉。如果进口商或外国被诉方没有做出回应,ITC会可认定公司放弃抗辩而发出排除令。

ITC在337调查案中所采取的是“对物”管辖权,也就是针对进口到美国的产品进行管辖。这很合理:ITC无权管制外国公司,但有权管制其进口产品。一般而言,337条款调查案和大多数的普通诉讼案不同,申诉方可以打赢一家1)不可能送达诉状、2)未能出庭聆讯,以及3)不可能被追讨款项的中国公司。

337条款调查案所采取的补救措施是颁布排除令,阻止答辩方的侵权产品进入美国。但是在某些特殊情况下,如果某个产品非常容易制造,ITC可以发布普遍排除令,不分来源地禁止所有同类侵权产品进入美国。以我处理过的魔方拼图案件为例,Ideal公司(申请人)把超过400家台湾公司列为侵犯其普通法商标的答辩人。ITC在1983年发布了普遍排除令(General Exclusion Order),阻止非Ideal公司制造的魔方产品进入美国市场,这一禁令沿用至今。除了排除令,ITC也可以发布制止令(cease and desist orders),禁止美国进口商继续售卖相关侵权产品。

337条款调查案的双方也可以选择庭外和解,但是和解协议必须经由ITC复审。我们经常协助客户尽早解决337条款调查案,以减少他们的诉讼费用。在20世纪90年代初期,RCA针对中国进口的电视提出了337条款调查。所有涉及的中国公司通过与RCA签署授权许可协议,迅速地解决了该调查案。

337条款调查案中的答辩人通常可以通过修改本身产品的设计来避开相关的侵权指责。约翰迪尔(John Deere)曾经指控把拖拉机漆成绿色和黄色的中国公司侵犯了约翰迪尔的商标,因而提出了一项著名的337条款调查案。大部分的中国答辩人与申诉人达成协议并改变拖拉机的颜色,例如蓝红色。

关键点:337条款调查案是ITC发起的强有力诉讼案,美国公司应该把它视为阻止侵权产品进入美国市场的手段。另一方面,涉及这些调查案的美国进口商和外国答辩人应该认真地对待它们,并且迅速做出回应,因为排除令发出后可延续多年有效。

 STOP IP INFRINGING PRODUCTS FROM CHINA AND OTHER COUNTRIES USING CUSTOMS AND SECTION 337 CASES

With Amazon and Ebay having increased their efforts at bringing in Chinese sellers and with more and more Chinese manufacturers branching out and making their own products, the number of companies contacting our China lawyers here at Harris Moure about problems with counterfeit products and knockoffs has soared. If the problem involves infringing products being imported into the United States, powerful remedies are available to companies with US IP rights if the infringing imports are products coming across the US border.

If the IP holder has a registered trademark or copyright, the individual or company holding the trademark or copyright can go directly to Customs and record the trademark under 19 CFR 133.1 or the copyright under 19 CFR 133.31.  See https://iprr.cbp.gov/.

Many years ago a US floor tile company was having massive problems with imports infringing its copyrights on its tile designs.  Initially, we looked at a Section 337 case as described below, but the more we dug down into the facts, we discovered that the company simply failed to register its copyrights with US Customs.

Once the trademarks and copyrights are registered, however, it is very important for the company to continually police the situation and educate the various Customs ports in the United States about the registered trademarks and copyrights and the infringing imports coming into the US.  Such a campaign can help educate the Customs officers as to what they should be looking out for when it comes to identifying which imports infringe the trademarks and copyrights in question.  The US recording industry many years ago had a very successful campaign at US Customs to stop infringing imports.

For those companies with problems from Chinese infringing imports, another alternative is to go to Chinese Customs to stop the export of infringing products from China.  The owner of Beanie Babies did this very successfully having Chinese Customs stop the export of the infringing Beanie Babies out of China.

One of the most powerful remedies is a Section 337 case, which can block infringing products, regardless of their origin, from entering the U.S.  A Section 337 action (the name comes from the implementing statute, 19 U.S.C. 1337) is available against imported goods that infringe a copyright, trademark, patent, or trade secret. But because other actions are usually readily available to owners of registered trademarks and copyrights, Section 337 actions are particularly effective for owners of patents, unregistered trademarks, and trade secrets. Although generally limited to IP rights, in the ongoing Section 337 steel case, US Steel has been attempting to expand the definition of unfair acts to include hacking into computer systems and antitrust violations.

The starting point is a section 337 investigation at the US International Trade Commission (“ITC”).  If the ITC finds certain imports infringe a specific intellectual property right, it can issue an exclusion order and U.S. Customs will then keep out all the infringing imports at the border.

Section 337 cases have been brought and exclusion orders issued against a vast range of different products: from toys (Rubik’s Cube Puzzles, Cabbage Patch Dolls) to footwear (Converse sneakers) to large machinery (paper-making machines) to consumer products (caskets, auto parts, electronic cigarettes and hair irons) to high tech products (computers, cell phones, and semiconductor chips).

Section 337 is a hybrid IP and trade statute, which requires a showing of injury to a US industry. The injury requirement is very low and can nearly always be met–a few lost sales will suffice to show injury. The US industry requirement can be a sticking point. The US industry is usually the one company that holds the intellectual property right in question. If the IP right is a registered trademark, copyright or patent, the US industry requirement has been expanded to not only include significant US investment in plant and equipment, labor or capital to substantial investment in the exploitation of the IP right, including engineering, research and development or licensing.  Recently, however, the ITC has raised the US industry requirement to make it harder for patent “trolls” or Non Practicing Entities to bring 337 cases.

Section 337 cases, however, are directed at truly unfair acts.  Patents and Copyrights are protected by the US Constitution so in contrast to antidumping and countervailing duty cases, respondents in these cases get more due process protection.  The Administrative Procedures Act is applied to Section 337 cases with a full trial before an Administrative Law Judge (“ALJ”), extended full discovery, a long trial type hearing, but on a very expedited time frame.

Section 337 actions, in fact, are the bullet train of IP litigation, fast, intense litigation in front of an ALJ.  The typical section 337 case takes only 12-15 months. Once a 337 petition is filed, the ITC has 30 days to determine whether or not to institute the case. After institution, the ITC will serve the complaint and notice of investigation on the respondents. Foreign respondents have 30 days to respond to the complaint; US respondents have only 20 days. If the importers or foreign respondents do not respond to the complaint, the ITC can find the companies in default and issue an exclusion order.

The ITC’s jurisdiction in 337 cases is “in rem,” which means it is over the product being imported into the US. This makes sense: the ITC has no power over the foreign companies themselves, but it does have power over the imports. What this means in everyday terms is that unlike most regular litigation, a Section 337 case can be effectively won against a Chinese company that 1) is impossible to serve, 2) fails to show up at the hearing, and 3) is impossible to collect any money from.

The remedy in section 337 cases is an exclusion order excluding the respondent’s infringing products from entering the United States. In special situations, however, where it is very easy to manufacture a product, the ITC can issue a general exclusion order against the World.  In the Rubik’s Cube puzzle case, which was my case at the ITC, Ideal (the claimant) named over 400 Taiwan companies as respondents infringing its common law trademark. The ITC issued a General Exclusion Order in 1983 and it is still in force today, blocking Rubik’s Cube not made by Ideal from entering the United States. In addition to exclusion orders, the ITC can issue cease and desist orders prohibiting US importers from selling products in inventory that infringe the IP rights in question

Section 337 cases can also be privately settled, but the settlement agreement is subject to ITC review. We frequently work with our respondent clients to settle 337 cases early to minimize their legal fees. In the early 1990s, RCA filed a section 337 case against TVs from China. The Chinese companies all quickly settled the case by signing a license agreement with RCA.

Respondents caught in section 337 cases often can modify their designs to avoid the IP right in question. John Deere brought a famous 337 case aimed at Chinese companies that painted their tractors green and yellow infringing John Deere’s trademark. Most of the Chinese respondents settled the case and painted their tractors different colors, such as blue and red.

Bottom Line: Section 337 cases are intense litigation before the ITC, and should be considered by U.S. companies as a tool for fighting against infringing products entering the United States. On the flip side, US importers and foreign respondents named in these cases should take them very seriously and respond quickly because exclusion orders can stay in place for years.

If you have any questions about these cases or about US trade policy, TPP, the antidumping or countervailing duty law, trade adjustment assistance, customs, False Claims Act or 337 IP/patent law in general, please feel free to contact me.

Best regards,

Bill Perry

 

 

US CHINA TRADE WAR–TPP POLITICS, TAAF THE ANSWER, $2 BILLION MISSING DUMPING DUTIES AS CASES RISE, CUSTOMS LAW CHANGES, SOLAR CELLS, 337 CUSTOMS STOP INFRINGING IMPORTS

US Capitol North Side Construction Night Washington DC ReflectioFIRM UPDATE

In mid-August, Adams Lee, a well- known Trade and Customs lawyer from White & Case in Washington DC, has joined us here at Harris Moure in Seattle.  Adams has handled well over 100 antidumping and countervailing duty cases.  Attached is Adams’ bio, adams-lee-resume-aug-16, and his article is below on the new Customs Regulations against Evasion of US Antidumping and Countervailing Duty Orders.

Adams and I will both be in China from Sept 11th to October 1st in Beijing, Shanghai and Nanjing.  If anyone would like to talk to us about these issues, please feel free to contact me at my e-mail, bill@harrismoure.com.

TRADE IS A TWO WAY STREET

“PROTECTIONISM BECOMES DESTRUCTIONISM; IT COSTS JOBS”

PRESIDENT RONALD REAGAN, JUNE 28, 1986

US CHINA TRADE WAR SEPTEMBER 8, 2016

Dear Friends,

Trade continues to be at the center of the Presidential primary with a possible passage of the Trans Pacific Partnership during the Lame Duck Session.  This blog post contains the sixth, and maybe the most important, article on Trade Adjustment Assistance for Companies of a several part series on how weak free trade arguments have led to the sharp rise of protectionism of Donald Trump and Bernie Sanders and the now possible demise of the Trans Pacific Partner (“TPP”).

The first article outlined the problem and why this is such a sharp attack on the TPP and some of the visceral arguments against free trade.  The second article explored in depth the protectionist arguments and the reason for the rise of Donald Trump and Bernie Sanders.  The third article explored the weak and strong arguments against protectionism.  The fourth article discussed one of the most important arguments for the TPP—National Security.  The fifth article discussed why the Commerce Department’s and the US International Trade Commission’s (ITC) policy in antidumping (“AD”) and countervailing duty (“CVD”) cases has led to a substantial increase in protectionism and national malaise of international trade victimhood.

The sixth article provides an answer with the only trade program that works and saves the companies and the jobs that go with them—The Trade Adjustment Assistance for Firms/Companies program along with MEP, another US manufacturing program.  The Article will describe the attempts by both Congress and the Obama Administration to kill the program, which may, in fact, have resulted in the sharp rise in protectionism in the US.

To pass the TPP, Congress must also provide assistance to make US companies competitive in the new free trade market created by the TPP.  Congress must restore the trade safety net so that Congress can again vote for free trade agreements, and the United States can return to its leadership in the Free Trade area.  The Congress has to fix the trade situation now before the US and the World return to the Smoot Hawley protectionism of the 1930s and the rise of nationalism, which can lead to military conflict.

In addition, set forth below are articles on a possible new antidumping case on Aluminum Foil from China and the rise of AD and CVD cases, the $2 billion in missing AD and CVD duties, the new Customs regulations to stop Transshipment in AD and CVD cases, the upcoming deadlines in the Solar Cells case in both English and Chinese, recent decisions in Steel cases,  antidumping and countervailing duty reviews in September against Chinese companies, and finally an article about how to stop imports that infringe US intellectual property rights, either using US Customs law or Section 337 at the US International Trade Commission (“ITC”).

If anyone has any questions or wants additional information, please feel free to contact me at my new e-mail address bill@harrismoure.com.

Best regards,

Bill Perry

TRADE PROTECTIONISM IS STILL A VERY BIG TOPIC OF THE PRESIDENTIAL ELECTION; THE TPP PROBABLY IS NOT COMING UP IN THE LAME DUCK

As mentioned in my last newsletter, I believe that if Hilary Clinton is elected, President Obama will push for the Trans Pacific Partnership (“TPP”) to come up for a vote during the Lame Duck Session.  The Congress, however, has other ideas.

In early August, U.S. House Speaker Paul Ryan stated that he saw no reason to bring up the TPP in the Lame Duck because “we don’t have the votes.”  Ryan went on to state:

“As long as we don’t have the votes, I see no point in bringing up an agreement only to defeat it.  They have to fix this agreement and renegotiate some pieces of it if they have any hope or chance of passing it. I don’t see how they’ll ever get the votes for it.”

Democratic Senator Ron Wyden stated in late August that he will not take a position on the TPP until Senate Majority Leader Mitch McConnell brings the TPP up for a vote.  But on August 26th, Mitch McConnell stated that passage of the Trans-Pacific Partnership will be the next president’s problem, saying that the Senate will not vote on the treaty this year:

“The current agreement, the Trans-Pacific [Partnership], which has some serious flaws, will not be acted upon this year.  It will still be around. It can be massaged, changed, worked on during the next administration.”

With this statement, McConnell appears to have killed passage during the Obama Administration.

But businesses continue to push for the TPP.  On Sept 6th, the California Chamber of Commerce urged its Congressional delegation to pass the TPP.  In the attached Sept 7th letter, 9-7finaltppletter, the Washington State Council on International Trade also urged its Congressional delegation to pass TPP, stating:

“with 40 percent of Washington jobs dependent upon trade, it is paramount that we prioritize policies and investments that increase our state’s international competitiveness. That is why it is so important that you join us in calling for an immediate vote on the TPP; according to a newly released Washington Council on International Trade-Association of Washington Business study, Washington could have already increased our exports by up to $8.7 billion and directly created 26,000 new jobs had the TPP been implemented in 2015.

While the U.S. has some of the lowest import duties in the world on most goods, our local Washington exporters are faced with thousands of tariffs that artificially inflate the cost of American-made goods. TPP will help eliminate these barriers . . ..

TPP aligns with Washington’s high standards, setting 21st century standards for digital trade, environmental protections, and labor rules .  . . .  If we want to increase our competitiveness and set American standards for global trade, we must act now with the TPP.

This election season’s rhetoric has been hostile toward trade, but the TPP’s benefits for our state are undeniable. It is imperative that our state steps up to advocate for the family wage jobs and economic opportunities created by trade, and the time to do so is now.”

Despite the Congressional opposition, ever the optimist, President Obama keeps pushing for passage during the Lame Duck.  On August 30th, the White House Press Office stated:

“The president is going to make a strong case that we have made progress and there is a path for us to get this done before the president leaves office.”

On September 1, 2016, at a Press Conference in Hangzhou, China for the G20 meeting, President Obama said he is still optimistic about passage of the Trans-Pacific Partnership trade agreement. Obama argued that the economic benefits of the pact would win out once the “noise” of the election season subsides.

The President said he plans to assure the leaders of the other countries that signed the TPP that the U.S. will eventually approve the deal despite the very vocal opposition from Democratic and Republican lawmakers and Presidential candidates.

President Obama went to state:

“And it’s my intention to get this one done, because, on the merits, it is smart for America to do it. And I have yet to hear a persuasive argument from the left or the right as to why we wouldn’t want to create a trade framework that raises labor standards, raising environmental standards, protects intellectual property, levels the playing field for U.S. businesses, brings down tariffs.”

Obama stated that although other countries, such as Japan, have troubles passing the TPP, the other countries:

“are ready to go.  And what I’ll be telling them is that the United States has never had a smooth, uncontroversial path to ratifying trade deals, but they eventually get done”

“And so I intend to be making that argument. I will have to be less persuasive here because most people already understand that. Back home, we’ll have to cut through the noise once election season is over.  It’s always a little noisy there.”

As mentioned in the last blog post, one of the strongest arguments for the TPP is National Security.  Trade agreements help stop trade wars and military conflict.  But despite that very strong point, the impact of free trade on the average manufacturing worker has not been beneficial.

In a recent e-mail blast, the Steel Workers make the point:

“Because of unfair trade, 1,500 of my colleagues at U.S. Steel Granite City Works in Granite City, Illinois are still laid-off. It’s been more than six months since our mill shut down.

Worker unemployment benefits are running out. Food banks are emptying out. People are losing their homes. City services might even shut down.

But there’s finally reason for hope. The Commerce Department recently took action to enforce our trade laws by placing duties on unfairly traded imports from countries like China. That will help ensure steel imports are priced fairly — and allow us to compete . . . .

All told, nearly 19,000 Americans have faced layoffs across the country because of the steel imports crisis.

China is making far more steel than it needs. China knows this is a problem, and repeatedly has pledged to cut down on steel production. But nothing has changed . . . .

China’s steel industry is heavily subsidized by its government, and it also doesn’t need to follow serious labor or environmental rules. But China has to do something with all that steel, so it dumps it into the United States far below market value.”

In a recent Business Week article, Four Myths about Trade, Robert Atkinson, the president of the Information Technology and Innovation Foundation, made the same point stating:

The Washington trade establishment’s second core belief is that trade is an unalloyed good, even if other nations engage in mercantilism. . . . it doesn’t matter if other nations massively subsidize their exporters, require U.S. companies to hand over the keys to their technology in exchange for market access, or engage in other forms of mercantilist behavior.  . . .

But China and others are proving that this is folly. In industry after industry, including the advanced innovation-based industries that are America’s future, they are gaming the rules of global trade to hold others back while they leap forward. . ..

It’s a reflection of having lost competitive advantage to other nations in many higher-value-added industries, in part because of foreign mercantilist policies and domestic economic-policy failures.

The Author then goes on to state the US must be tough in fighting mercantilism and “vigilantly enforce trade rules, such as by bringing many more trade-enforcement cases to the WTO, pressuring global aid organizations to cut funding to mercantilist nations, limiting the ability of companies in mercantilist nations to buy U.S. firms, and more.”

But this argument then runs into reality.  As indicated below, Commerce finds dumping in about 95% of the cases.  Thus, there are more than 130 AD and CVD orders against China blocking about $30 billion in imports.  Presently more than 80 AD and CVD orders are against raw materials from China, chemicals, metals and various steel products, used in downstream US production.  In the Steel area, there are AD and CVD orders against the following Chinese steel products:

carbon steel plate, hot rolled carbon steel flat products, circular welded and seamless carbon quality steel pipe, rectangular pipe and tube, circular welded austenitic stainless pressure pipe, steel threaded rod, oil country tubular goods, steel wire strand and wire, high pressure steel cylinders, non-oriented electrical steel, and carbon and certain alloy steel wire rod.

There are ongoing investigations against cold-rolled steel and corrosion resistant/galvanized steel so many Chinese steel products from China are already blocked by US AD and CVD orders with very high rates well over 100%.

AD and CVD orders stay in place for 5 to 30 years and yet the companies, such as the Steel Industry, still decline.  After 40 years of protection from Steel imports by AD and CVD orders, where is Bethlehem Steel today?  The Argument seems to be that if industries simply bring more cases, the Commerce Department is even tougher and the orders are enforced, all US companies will be saved, wages will go up and jobs will be everywhere.

The reality, however, is quite different.  In fact, many of these orders have led to the destruction of US downstream industries so does hitting the Chinese with more trade cases really solve the trade problem?

More importantly, although Commerce does not use real numbers in antidumping cases against China, it does use actual prices and costs in antidumping steel cases against Korea, India, Taiwan, and many other countries.  In a recent antidumping case against Off the Road Tires from India, where China faces dumping rates of between 11 and 105%, the only two Indian exporters, which were both mandatory respondents, received 0% dumping rates and the Commerce Department in a highly unusual preliminary determination reached a negative no dumping determination on the entire case.

Market economy countries, such as Korea and India, can run computer programs to make sure that they are not dumping.  This is not gaming the system.  This is doing exactly what the antidumping law is trying to remedy—elimination of the unfair act, dumping.

Antidumping and countervailing duty laws are not penal statutes, they are remedial statutes and that is why US importers, who pay the duties, and the foreign producers/exporters are not entitled to full due process rights in AD and CVD cases, including application of the Administrative Procedures Act, decision by a neutral Administrative Law Judge and a full trial type hearing before Commerce and the ITC, such as Section 337 Intellectual Property cases, described below.

In fact, when industries, such as the steel industry, companies and workers along with Government officials see dumping and subsidization in every import into the United States, this mindset creates a disease—Globalization/International Trade victimhood.  We American workers and companies simply cannot compete because all imports are dumped and subsidized.

That simply is not true and to win the trade battles and war a change in mindset is required.

In his Article, Mr. Atkinson’s second argument may point to the real answer.  The US government needs to make US manufacturing companies competitive again:

It must begin with reducing the effective tax rate on corporations. To believe that America can thrive in the global economy with the world’s highest statutory corporate-tax rates and among the highest effective corporate-tax rates, especially for manufacturers, is to ignore the intense global competitive realities of the 21st century. Tax reform then needs to be complemented with two other key items: a regulatory-reform strategy particularly aimed at reducing burdens on industries that compete globally, and increased funding for programs that help exporters, such as the Export-Import Bank, the new National Network for Manufacturing Innovation, and a robust apprenticeship program for manufacturing workers. . . .

if Congress and the next administration develop a credible new globalization doctrine for the 21st century — melding tough trade enforcement with a robust national competitiveness agenda — then necessary trade-opening steps like the Trans-Pacific Partnership will once again be on the table and the U.S. economy will begin to thrive once again.

When it comes to Trade Adjustment Assistance, however, as Congressman Jim McDermott recently stated in an article, workers do not want handouts and training.  They want jobs.  The only trade remedy that actually provides jobs is the Trade Adjustment Assistance for Firms/Companies program and MEP, another manufacturing program.

FREE TRADE REQUIRES COMPETITIVE US COMPANIES— TAA FOR FIRMS/COMPANIES AND THE MEP MANUFACTURING PROGRAM ARE THE ANSWER

On August 17th, in a letter to the Wall Street Journal, the author referred to “the longstanding Republican promotion of trade as an engine of growth.” The author then goes on to state:

But what Donald Trump sees and the Republican elites have long missed is that for trade to be a winner for Americans, our government must provide policies for our industries to be the most competitive in the world. Mr. Zoellick and others promoted trade without promoting American competitiveness.  . . .

Mr. Zoellick should take a lesson from the American gymnasts in Rio and see how competitiveness leads to winning.

Although Donald Trump might agree with that point, there are Government programs already in effect that increase the competitiveness of US companies injured by imports, but they have been cut to the bone.

This is despite the fact that some of the highest paying American jobs have routinely been in the nation’s manufacturing sector. And some of the highest prices paid for the nation’s free trade deals have been paid by the folks who work in it. What’s shocking is the fact that that isn’t shocking anymore. And what’s really shocking is that we seem to have accepted it as the “new normal.” Now where did that ever come from?

How did we get here? How did we fall from the summit? Was it inexorable? Did we get soft? Did we get lazy? Did we stop caring? Well perhaps to some extent. But my sense of it is that too many of us have bought into the idea of globalization victimhood and a sort of paralysis has been allowed to set in.

Now in my opinion that’s simply not in America’s DNA. It’s about time that this nation decided not to participate in that mind set any longer. Economists and policy makers of all persuasions are now beginning to recognize the requirement for a robust response by this nation to foreign imports – irrespective of party affiliation or the particular free trade agreement under consideration at any given moment.  Companies, workers and Government officials need to stop blaming the foreigner and figure out what they can do to compete with the foreign imports.

There is no doubt in my mind that open and free trade benefits the overall U.S. economy in the long run. However, companies and the families that depend on the employment therein, indeed whole communities, are adversely affected in the short run (some for extended periods) resulting in significant expenditures in public welfare and health programs, deteriorated communities and the overall lowering of America’s industrial output.

But here’s the kicker: programs that can respond effectively already exist. Three of them are domiciled in our Department of Commerce and one in our Department of Labor:

  • Trade Adjustment Assistance for Firms (Commerce)
  • The Hollings Manufacturing Extension Partnership (Commerce)
  • Economic Adjustment for Communities (Commerce)
  • Trade Adjustment Assistance for Displaced Workers (Labor)

This Article, however, is focused on making US companies competitive again and the first two programs do just that, especially for smaller companies.  Specific federal support for trade adjustment programs, however, has been legislatively restrictive, bureaucratically hampered, organizationally disjointed, and substantially under-funded.

The lessons of history are clear. In the 1990’s, after the end of the Cold War and the fall of the Soviet Union, the federal government reduced defense industry procurements and closed military facilities. In response, a multi-agency, multi-year effort to assist adversely affected defense industries, their workers, and communities facing base closures were activated. Although successes usually required years of effort and follow on funding from agencies of proven approaches (for example the reinvention of the Philadelphia Naval Shipyard into a center for innovation and vibrant commercial activities), there was a general sense that the federal government was actively responding to a felt need at the local level.

A similar multi-agency response has been developed in the event of natural disasters, i.e., floods, hurricanes, tornadoes and earthquakes. Dimensions of the problem are identified, an appropriate expenditure level for a fixed period of time is authorized and the funds are deployed as needed through FEMA, SBA and other relevant agencies such as EDA.

The analogy to trade policy is powerful.  When the US Government enters into Trade Agreements, such as the TPP, Government action changes the market place.  All of a sudden US companies can be faced, not with a Tidal Wave, but a series of flash floods of foreign competition and imports that can simply wipe out US companies.

A starting point for a trade adjustment strategy would be for a combined Commerce-Labor approach building upon existing authorities and proven programs, that can be upgraded and executed forthwith.

Commerce’s Trade Adjustment Assistance for Firms (TAAF) has 11 regional (multi-state) TAAF Centers but the program has been cut to only $12.5 million annually. The amount of matching funds for US companies has not changed since the 1980s. The system has the band-width to increase to a run rate of $50 million.  Projecting a four-year ramp up of $90 million (FY18-FY21), the TAA program could serve an additional 2,150 companies.

Foreign competitors may argue that TAA for Firms/Companies is a subsidy, but the money does not go directly to the companies themselves, but to consultants to work with the companies through a series of knowledge-based projects to make the companies competitive again.  Moreover, the program does not affect the US market or block imports in any way.

Does the program work?  In the Northwest, where I am located, the Northwest Trade Adjustment Assistance Center has been able to save 80% of the companies that entered the program since 1984.  The MidAtlantic Trade Adjustment Assistance Center in this video at http://mataac.org/howitworks/ describes in detail how the program works and why it is so successful—Its flexibility in working with companies on an individual basis to come up with specific adjustment plans for each company to make the companies competitive again in the US market as it exists today.

Increasing funding will allow the TAA for Firms/Companies program to expand its bandwidth and provide relief to larger US companies, including possibly even steel producers.  If companies that use steel can be saved by the program, why can’t the steel producers themselves?

But it will take a tough love approach to trade problems.  Working with the companies to forget about Globalization victimhood and start trying to actually solve the Company’s problems that hinder its competitiveness in the market as it exists today.

In addition to TAA for Firms/Companies, another important remedy needed to increase competitiveness is Commerce’s Manufacturing Extension Partnership (MEP), which has a Center in each State and Puerto Rico.  MEP provides high quality management and technical assistance to the country’s small manufacturers with an annual budget of $130 million. MEP, in fact, is one the remedies suggested by the TAA Centers along with other projects to make the companies competitive again.

As a consequence of a nation-wide re-invention of the system, MEP is positioned to serve even more companies. A commitment of $100 million over four years would serve an additional 8,400 firms. These funds could be targeted to the small manufacturing firms that are the base of our supply chain threatened by foreign imports.

Each of these programs requires significant non-federal match or cost share from the companies themselves, to assure that the local participants have significant skin in the game and to amplify taxpayer investment.  A $250 million commitment from the U.S. government would be a tangible although modest first step in visibly addressing the local consequences of our trade policies. The Department of Commerce would operate these programs in a coordinated fashion, working in collaboration with the Department of Labor’s existing Trade Adjustment Assistance for Displaced Workers program.

TAA for Workers is funded at the $711 million level, but retraining workers should be the last remedy in the US government’s bag.  If all else fails, retrain workers, but before that retrain the company so that the jobs and the companies are saved.  That is what TAA for Firms/Companies and the MEP program do.  Teach companies how to swim in the new market currents created by trade agreements and the US government

In short – this serious and multi-pronged approach will begin the process of stopping globalization victimhood in its tracks.

Attached is White Paper, taaf-2-0-white-paper, prepares to show to expand TAA for Firms/Companies and take it to the next level above $50 million, which can be used to help larger companies adjust to import competition.  The White Paper also rebuts the common arguments against TAA for Firms/Companies.

ALUMINUM FOIL FROM CHINA, RISE IN ANTIDUMPING CASES PUSHED BY COMMERCE AND ITC

On August 22, 2016, the Wall Street Journal published an article on how the sharp rise of aluminum foil imports, mostly from China, has led to the shutdown of US U.S. aluminum foil producers.  Articles, such as this one, often signal that an antidumping case is coming in the near future.

Recently, there have been several articles about the sharp rise in antidumping and countervailing duty/trade remedy cases in the last year.  By the second half of 2016, the US Government has reported that twice as many antidumping (“AD”) and countervailing duty (“CVD”) case have been initiated in 2015-2016 as in 2009.

China is not the only target.  AD cases have been recently filed against steel imports from Austria, Belgium, Brazil, China, France, Germany, Italy, Japan, South Korea, South Africa, Taiwan, and Turkey; Steel Flanges from India, Italy and Spain; Chemicals from Korea and China, and Rubber from Brazil, Korea, Mexico and Poland.

The potential Aluminum Foil case may not be filed only against China.  In addition to China, the case could also be filed against a number of foreign exporters of aluminum foil to the United States.

Under US law Commerce determines whether dumping is taking place.  Dumping is defined as selling imported goods at less than fair value or less than normal value, which in general terms means lower than prices in the home/foreign market or below the fully allocated cost of production.  Antidumping duties are levied to remedy the unfair act by raising the US price so that the products are fairly traded.

Commerce also imposes Countervailing Duties to offset any foreign subsidies provided by foreign governments so as to raise the price of the subsidized imports.

AD and CVD duties can only be imposed if there is injury to the US industry, which is determined by the US International Trade Commission (“ITC”).  But in determining injury, the law directs the ITC to cumulate, that is add together all the imports of the same product from the various foreign exporters.  Thus if a number of countries are exporting aluminum foil in addition to China, there is a real incentive for the US aluminum foil industry to file a case against all the other countries too.

There are several reasons for the sharp rise in AD and CVD cases.  One is the state of the economy and the sharp rise in imports.  In bad economic times, the two lawyers that do the best are bankruptcy and international trade lawyers.  Chinese overcapacity can also result in numerous AD and CVD cases being filed not only in the United States but around the World.

Although the recent passage of the Trade Preferences Extension Act of 2015 has made it marginally better to bring an injury case at the ITC, a major reason for the continued rise in AD and CVD cases is the Commerce and ITC determinations in these cases.  Bringing an AD case, especially against China, is like the old country saying, shooting fish in a barrel.

By its own regulation, Commerce finds dumping and subsidization in almost every case, and the ITC in Sunset Review Investigations leaves antidumping and countervailing duty orders in place for as long as 20 to 30 years, often to protect single company US industries, resulting in permanent barriers to imports and the creation of monopolies.

Many readers may ask why should people care if prices go up a few dollars at WalMart for US consumers?  Jobs remain.  Out of the 130 plus AD and CVD orders against China, more than 80 of the orders are against raw materials, chemicals, metals and steel, that go directly into downstream US production.  AD orders have led to the closure of downstream US factories.

Commerce has defined dumping so that 95% of the products imported into the United States are dumped.  Pursuant to the US Antidumping Law, Commerce chooses mandatory respondent companies to individually respond to the AD questionnaire.  Commerce generally picks only two or three companies out of tens, if not hundreds, of respondent companies.

Only mandatory companies in an AD case have the right to get zero, no dumping margins.  Only those mandatory respondent companies have the right to show that they are not dumping.  If a company gets a 0 percent, no dumping determination, in the initial investigation, the antidumping order does not apply to that company.

Pursuant to the AD law, for the non-mandatory companies, the Commerce Department may use any other reasonable method to calculate antidumping rates, which means weight averaging the rates individually calculated for the mandatory respondents, not including 0 rates.  If all mandatory companies receive a 0% rate, Commerce will use any other reasonable method to determine a positive AD rate, not including 0% rates.

So if there are more than two or three respondent companies in an AD case, which is the reality in most cases, by its own law and practice, Commerce will reach an affirmative dumping determination.  All three mandatory companies may get 0% dumping rates, but all other companies get a positive dumping rate.  Thus almost all imports are by the Commerce Department’s definition dumped.

Under the Commerce Department’s methodology all foreign companies are guilty of dumping and subsidization until they prove their innocence, and almost all foreign companies never have the chance to prove their innocence.

Commerce also has a number of other methodologies to increase antidumping rates.  In AD cases against China, Commerce treats China as a nonmarket economy country and, therefore, refuses to use actual prices and costs in China to determine dumping, which makes it very easy for Commerce to find very high dumping rates.

In market economy cases, such as cases against EU and South American countries, Commerce has used zeroing or targeted dumping to create antidumping rates, even though the WTO has found such practices to be contrary to the AD Agreement.

The impact of the Commerce Department’s artificial methodology is further exaggerated by the ITC.  Although in the initial investigation, the ITC will go negative, no injury, in 30 to 40% of the cases, once the antidumping order is in place it is almost impossible to persuade the ITC to lift the antidumping order in Sunset Review investigations.

So antidumping orders, such as Pressure Sensitive Tape from Italy (1977), Prestressed Concrete Steel Wire Strand from Japan (1978), Potassium Permanganate from China (1984), Cholopicrin from China (1984), and Porcelain on Steel Cookware from China (1986), have been in place for more than 30 years.  In 1987 when I was at the Commerce Department, an antidumping case was filed against Urea from the entire Soviet Union.  Antidumping orders from that case against Russia and Ukraine are still in place today.

In addition, many of these antidumping orders, such as Potassium Permanganate, Magnesium, Porcelain on Steel Cookware, and Sulfanilic Acid, are in place to protect one company US industries, creating little monopolies in the United States.

Under the Sunset Review methodology, the ITC never sunsets AD and CVD orders unless the US industry no longer exists.

By defining dumping the way it does, both Commerce and the ITC perpetuate the myth of Globalization victimhood.  We US companies and workers simply cannot compete against imports because all imports are dumped or subsidized.  But is strangling downstream industries to protect one company US industries truly good trade policy?  Does keeping AD orders in place for 20 to 30 years really save the US industry and make the US companies more competitive?  The answer simply is no.

Protectionism does not work but it does destroy downstream industries and jobs.  Protectionism is destructionism. It costs jobs.

US MISSING $2 BILLION IN ANTIDUMPING DUTIES, MANY ON CHINESE PRODUCTS

According to the attached recent report by the General Accounting Office, gao-report-ad-cvd-missing-duties, the US government is missing about $2.3 billion in unpaid anti-dumping and countervailing duties, two-thirds of which will probably never be paid.

The United States is the only country in the World that has retroactive liability for US importers.  When rates go up, US importers are liable for the difference plus interest.  But the actual determination of the amount owed by the US imports can take place many years after the import was actually made into the US.

The GAO found that billing errors and delays in final duty assessments were major factors in the unpaid bills, with many of the importers with the largest debts leaving the import business before they received their bill.

“U.S. Customs and Border Protection reported that it does not expect to collect most of that debt”.  Customs and Border Protection (“CBP”) anticipates that about $1.6 billion of the total will never be paid.

As the GAO report states:

elements of the U.S. system for determining and collecting AD/CV duties create an inherent risk that some importers will not pay the full amount they owe in AD/CV duties. . . . three related factors create a heightened risk of AD/CV duty nonpayment: (1) The U.S. system for determining such duties involves the setting of an initial estimated duty rate upon the entry of goods, followed by the retrospective assessment of a final duty rate; (2) the amount of AD/CV duties for which an importer may be ultimately billed can significantly exceed what the importer pays when the goods enter the country; and (3) the assessment of final AD/CV duties can occur up to several years after an importer enters goods into the United States, during which time the importer may cease operations or become unable to pay additional duties.

The vast majority of the missing duties, 89%, were clustered around the following products from China: Fresh Garlic ($577 million), Wooden Bedroom Furniture ($505 million), Preserved Mushrooms ($459 million), crawfish tail meat ($210 million), Pure Magnesium ($170 million), and Honey ($158 million).

The GAO Report concludes at page 56-47:

We estimate the amount of uncollected duties on entries from fiscal year 2001 through 2014 to be $2.3 billion. While CBP collects on most AD/CV duty bills it issues, it only collects, on average, about 31 percent of the dollar amount owed. The large amount of uncollected duties is due in part to the long lag time between entry and billing in the U.S. retrospective AD/CV duty collection system, with an average of about 2-and-a-half years between the time goods enter the United States and the date a bill may be issued. Large differences between the initial estimated duty rate and the final duty rate assessed also contribute to unpaid bills, as importers receiving a large bill long after an entry is made may be unwilling or unable to pay. In 2015, CBP estimated that about $1.6 billion in duties owed was uncollectible. By not fully collecting unpaid AD/CV duty bills, the U.S. government loses a substantial amount of revenue and compromises its efforts to deter and remedy unfair and injurious trade practices.

But with all these missing duties, why doesn’t the US simply move to a prospective methodology, where the importer pays the dumping rate calculated by Commerce and the rate only goes up for future imports after the new rate is published.

Simple answer—the In Terrorem, trade chilling, effect of the antidumping and countervailing duty orders—the legal threat that the US importers will owe millions in the future, which could jeopardize the entire import company.  As a result, over time imports from China and other countries covered by AD and CVD order often decline to 0 because established importers are simply too scared to take the risk of importing under an AD and CVD order.

CUTSOMS NEW LAW AGAINST TRANSSHIPMENT AROUND AD AND CVD ORDERS; ONE MORE LEGAL PROCEDURE FOR US IMPORTERS AND FOREIGN EXPORTERS TO BE WARY OF

By Adams Lee, Trade and Customs Partner, Harris Moure.

U.S. Customs and Border Protection (CBP) issued new attached regulations, customs-regs-antidumping, that establish a new administrative procedure for CBP to investigate AD and CVD duty evasion.  81 FR 56477 (Aug. 22, 2016). Importers of any product that could remotely be considered merchandise subject to an AD/CVD order now face an increased likelihood of being investigated for AD/CVD duty evasion. The new CBP AD/CVD duty evasion investigations are the latest legal procedure, together with CBP Section 1592 penalty actions (19 USC 1592), CBP criminal prosecutions (18 USC 542, 545), and “qui tam” actions under the False Claims Act, aimed at ensnaring US importers and their foreign suppliers in burdensome and time-consuming proceedings that can result in significant financial expense or even criminal charges.

The following are key points from these new regulations:

  • CBP now has a new option to pursue and shut down AD/CVD duty evasion schemes.
  • CBP will have broad discretion to issue questions and conduct on-site verifications.
  • CBP investigations may result in interim measures that could significantly affect importers.
  • CBP’s interim measures may effectively establish a presumption of the importer’s guilt until proven innocent.
  • Other interested parties, including competing importers, can chime in to support CBP investigations against accused importers.
  • Both petitioners and respondents will have the opportunity to submit information and arguments.
  • Failure to cooperate and comply with CBP requests may result in CBP applying an adverse inference against the accused party.
  • Failing to respond adequately may result in CBP determining AD/CVD evasion has occurred.

The new CBP regulations (19 CFR Part 165) establish a formal process for how it will consider allegations of AD/CVD evasion. These new regulations are intended to address complaints from US manufacturers that CBP was not doing enough to address AD/CVD evasion schemes and that their investigations were neither transparent nor effective.

AD/CVD duty evasion schemes typically involve falsely declaring the country of origin or misclassifying the product (e.g., “widget from China” could be misreported as “widget from Malaysia” or “wadget from China”).

Petitions filed by domestic manufacturers trigger concurrent investigations by the U.S. Department of Commerce (DOC) and the U.S. International Trade Commission (ITC) to determine whether AD/CVD orders should be issued to impose duties on covered imports. The DOC determines if imports have been dumped or subsidized and sets the initial AD/CVD rates.  CBP then has the responsibility to collect AD/CVD duty deposits and to assess the final amount of AD/CVD duties owed at the rates determined by DOC.

US petitioners have decried U.S. Customs and Border Protection (CBP) as the weak link in enforcing US trade laws, not just because of it often being unable to collect the full amount of AD/CVD duties owed, but also because how CBP responds to allegations of AD/CVD evasion. Parties that provided CBP with information regarding evasion schemes were not allowed to participate in CBP’s investigations and were not notified of whether CBP had initiated an investigation or the results of any investigation.

CBP’s new regulations address many complaints regarding CBP’s lack of transparency in handling AD/CVD evasion allegations. The new regulations provide more details on how CBP procedures are to be conducted, the types of information that will be considered and made available to the public, and the specific timelines and deadlines in CBP investigations:

  • “Interested parties” for CBP investigations now includes not just the accused importers, but also competing importers that submit the allegations.
  • Interested parties now have access to public versions of information submitted in CBP’s investigation of AD/CVD evasion allegations.
  • After submission and receipt of a properly filed allegation, CBP has 15 business day to determine whether to initiate an investigation and 95 days to notify all interested parties of its decision. If CBP does not proceed with an investigation, CBP has five business days to notify the alleging party of that determination.
  • Within 90 days of initiating an investigation, CBP can impose interim measures if it has a “reasonable suspicion” that the importer used evasion to get products into the U.S.

Many questions remain as to how CBP will apply these regulations to actual investigations.  How exactly will parties participate in CBP investigations and what kind of comments will be accepted?  How much of the information in the investigations will be made public? How is “reasonable suspicion” defined and what kind of evidence will be considered? Is it really the case that accused Importers may be subject to interim measures (within 90 days of initiation) even before they receive notice of an investigation (within 95 days of initiation)?

These new AD/CVD duty evasion regulations further evidence the government’s plans to step up its efforts to enforce US trade laws more effectively and importers must – in turn – step up their vigilance to avoid being caught in one of these new traps.

UPCOMING DEADLINES IN SOLAR CELLS FROM CHINA ANTIDUMPING CASE—CHANCE TO GET BACK INTO THE US MARKET AGAIN

There are looming deadlines in the Solar Cells from China Antidumping (“AD”) and Countervailing Duty (“CVD”) case.  In December 2016, US producers, Chinese companies and US importers can request a review investigation in the Solar Cells case of the sales and imports that entered the United States during the review period, December 1, 2015 to November 31, 2016.

December 2016 will be a very important month for US importers because administrative reviews determine how much US importers actually owe in AD and CVD cases. Generally, the US industry will request a review of all Chinese companies. If a Chinese company does not respond in the Commerce Department’s Administrative Review, its AD and CVD rate could well go to the highest level and for certain imports the US importer will be retroactively liable for the difference plus interest.

In my experience, many US importers do not realize the significance of the administrative review investigations. They think the AD and CVD case is over because the initial investigation is over.  Many importers are blindsided because their Chinese supplier did not respond in the administrative review, and the US importers find themselves liable for millions of dollars in retroactive liability.

In February 2016, while in China I found many examples of Chinese solar companies or US importers, which did not file requests for a review investigation in December 2015.  In one instance, although the Chinese company obtained a separate rate during the Solar Cells initial investigation, the Petitioner appealed to the Court.  The Chinese company did not know the case was appealed, and the importer now owe millions in antidumping duties because they failed to file a review request in December 2015.

In another instance, in the Solar Products case, the Chinese company requested a review investigation in the CVD case but then did not respond to the Commerce quantity and value questionnaire.   That could well result in a determination of All Facts Available giving the Chinese company the highest CVD China rate of more than 50%.

The worst catastrophe in CVD cases was Aluminum Extrusions from China where the failure of mandatory companies to respond led to a CVD rate of 374%.  In the first review investigation, a Chinese company came to us because Customs had just ruled their auto part to be covered by the Aluminum Extrusions order.  To make matters worse, an importer requested a CVD review of the Chinese company, but did not tell the company and they did not realize that a quantity and value questionnaire had been sent to them.  We immediately filed a QV response just the day before Commerce’s preliminary determination.

Too late and Commerce gave the Chinese company an AFA rate of 121% by literally assigning the Chinese company every single subsidy in every single province and city in China, even though the Chinese company was located in Guangzhou.  Through a Court appeal, we reduced the rate to 79%, but it was still a high rate, so it is very important for companies to keep close watch on review investigations.

The real question many Chinese solar companies may have is how can AD and CVD rates be reduced so that we can start exporting to the US again.  In the Solar Cells case, the CVD China wide rate is only 15%.  The real barrier to entry is the China wide AD rate of 249%

US AD and CVD laws, however, are considered remedial, not punitive statutes.  Thus, every year in the month in which the AD or CVD order was issued, Commerce gives the parties, including the domestic producers, foreign producers and US importers, the right to request a review investigation based on sales of imports that entered the US in the preceding year.

Thus, the AD order on Solar Cells from China was issued in December 2012.   In December 2016, a Chinese producer and/or US importer can request a review investigation of the Chinese solar cells that were entered, actually imported into, the US during the period December 1, 2015 to November 31, 2016.

Chinese companies may ask that it is too difficult and too expensive to export may solar cells to the US, requesting a nonaffiliated importer to put up an AD of 298%, which can require a payment of well over $1 million USD.  The US AD and CVD law is retrospective.  Thus the importer posts a cash deposit when it imports products under an AD or CVD order, and the importer will get back the difference plus interest at the end of the review investigation.

More importantly, through a series of cases, Commerce has let foreign producers export smaller quantities of the product to use as a test sale in a review investigation if all other aspects of the sale are normal.  Thus in a Solar Cells review investigation, we had the exporter make a small sale of several panels along with other products and that small sale served as the test sale to establish the new AD rate.

How successful can companies be in reviews?  In a recent Solar Cells review investigation, we dropped a dumping rate of 249% to 8.52%, allowing the Chinese Solar Cell companies to begin to export to the US again.

Playing the AD and CVD game in review investigations can significantly reduce AD and CVD rates and get the Chinese company back in the US market again

SOLAR CELLS FROM CHINA CHINESE VERSION OF THE ARTICLE

中国进口太阳能电池反倾销案即将到来的最后期限重返美国市场的机会

针对原产自中国的太阳能电池反倾销(“AD”)和反补贴税(“CVD”)案的期限迫在眉睫。2016年12月,美国制造商、中国公司和美国进口商可以要求当局复审调查于2015年12月1日至2016年11月31日的审查期间进口并在美国销售的太阳能电池案例。

2016年12月将会是美国进口商的一个重要月份,因为行政复审将决定美国进口商在AD和CVD案中的实际欠款。一般上,美国业者会要求当局对所有中国公司进行复审。如果一家中国公司没有对商务部的行政复审做出回应,它很可能被征收最高的AD和CVD税率,美国进口商也将被追溯征收特定进口产品的差额及利息。

就我的经验而言,许多美国进口商并没有意识到行政复审调查的重要性。他们认为初步调查结束后,AD和CVD案也就此结束。许多进口商因为其中国供应商没有对行政复审做出回应,导致他们本身背负数百万美元的追溯性责任而因此措手不及。

2016年2月,我在中国期间发现很多中国太阳能公司或美国进口商没有在2015年12月提出复审调查请求。在其中一个例子中,某中国公司虽然在太阳能电池初步调查期间获得了单独税率,但是申请人向法庭提出了上诉。该中国公司并不知道有关的上诉案,结果进口商由于无法在2015年12月提出复审要求,现在欠下了数百万美元的反倾销税。

在另一个与太阳能产品有关的案例中,某中国公司针对CVD案提出了复审调查的要求,却没有对商务部的数量和价值问卷做出回应。这很可能导致当局根据“所有可得的事实”(All Facts Available)来向该中国公司征收超过50%的最高对华CVD税率。

在众多的CVD案例中,中国进口的铝合金型材所面对的局面最糟糕,受强制调查的公司若无法做出相关回应可被征收374%的CVD税率。一家中国公司在首个复审调查时联系上我们,因为海关刚裁定他们的汽车零部件属于铝合金型材生产项目。更糟的是,一家进口商在没有通知该中国公司的情况下,要求当局对其进行CVD审查,而他们也不晓得当局已经向他们发出一份数量和价值问卷。我们立即在初审的前一天提交了QV做出了回应。

可是这一切都已经太迟了,虽然该中国公司位于广州,商务部却逐一地根据中国的每一个省份和城市的补贴,向该中国公司征收了121%的AFA税率。我们通过向法庭提出上诉,将税率减少到了79%,可是这一税率还是很高,因此所有公司都有必要仔细地关注复审调查。

很多中国太阳能产品企业最想知道的,是如何降低AD和CVD税率,好让我们能再次将产品进口到美国。以太阳能电池的案例来看,当局向中国征收的统一性CVD税率仅为15%。当局向中国征收的统一性AD税率高达249%,这才是真正的入市门槛。

不过,美国的AD和CVD法律被认为是补救性而不是惩罚性法规,所以商务部每年在颁布AD或CVD令后,会在该月份允许包括美国国内生厂商、外国生厂商和美国进口商在内的各方,对上一年在美国销售的进口产品提出复审调查的要求。

因此,针对中国进口的太阳能电池的AD令是在2012年12月颁布的。一家中国生厂商和/或美国进口商可以在2016年12月,要求当局对从2015年12月1日至2016年11月31日期间进口到美国的中国太阳能电池进行复审调查。

中国公司或许会问,要求一家无关联的进口商承担298%的AD税,也就是支付超过1百万美元的费用,以便进口大批的太阳能电池到美国,是否太困难也太贵了。美国的AD和CVD法律是有追溯力的。因此,在AD或CVD令下,进口商在进口产品时会支付现款押金,并在复审调查结束后取回差额加上利息。

更重要的是,在一系列的案例中,商务部已经允许外国生厂商在其它销售方面都正常的情况下,出口少量产品作为试销用途。所以在一宗太阳能电池的复审调查案中,我们让出口商在销售其它产品的同时,出售少量的电池板作为试销用途以建立新的AD税率。

公司在复审案中的成功率有多大?在最近的一宗太阳能电池复审调查案中,我们将倾销率从249%下降到8.52%,协助中国太阳能电池公司重新进口产品到美国。

在复审调查期间了解如何应对并采取正确的策略,可以大幅度降低AD和CVD税率,并让中国公司重返美国市场。

STEEL TRADE CASES

HOT ROLLED STEEL FLAT PRODUCTS

On August 5, 2016, in the attached fact sheet, factsheet-multiple-hot-rolled-steel-flat-products-ad-cvd-final-080816, Commerce issued final dumping determinations in Hot-Rolled Steel Flat Products from Australia, Brazil, Japan, Korea, the Netherlands, Turkey, and the United Kingdom cases, and a final countervailing duty determination of Hot-Rolled Steel Flat Products from Brazil, Korea, and Turkey.

Other than Brazil, Australia and the United Kingdom, most antidumping rates were in the single digits.

In the Countervailing duty case, most companies got rates in single digits, except for POSCO in Korea, which received a CVD rate of 57%.

SEPTEMBER ANTIDUMPING ADMINISTRATIVE REVIEWS

On September 8, 2016, Commerce published the attached Federal Register notice, pdf-published-fed-reg-notice-oppty, regarding antidumping and countervailing duty cases for which reviews can be requested in the month of September. The specific antidumping cases against China are: Crawfish Tailmeat, Foundry Coke, Kitchen Appliance Shelving and Racks, Lined Paper Products, Magnesia Carbon Bricks, Narrow Woven Ribbons, Off the Road Tires, Flexible Magnets, and Steel Concrete Reinforcing Bars.   The specific countervailing duty cases are: Kitchen Appliance Shelving and Racks, Narrow Woven Ribbons, Off the Road Tires, Flexible Magnets, and Magnesia Carbon Bricks.

For those US import companies that imported : Crawfish Tailmeat, Foundry Coke, Kitchen Appliance Shelving and Racks, Lined Paper Products, Magnesia Carbon Bricks, Narrow Woven Ribbons, Off the Road Tires, Flexible Magnets, and Steel Concrete Reinforcing Bars during the antidumping period September 1, 2015-August 31, 2016 or the countervailing duty period of review, calendar year 2015, the end of this month is a very important deadline. Requests have to be filed at the Commerce Department by the Chinese suppliers, the US importers and US industry by the end of this month to participate in the administrative review.

This is a very important month for US importers because administrative reviews determine how much US importers actually owe in AD and CVD cases. Generally, the US industry will request a review of all Chinese companies. If a Chinese company does not respond in the Commerce Department’s Administrative Review, its antidumping and countervailing duty rate could well go to the highest level and for certain imports the US importer will be retroactively liable for the difference plus interest.

STOP IP INFRINGING PRODUCTS FROM CHINA AND OTHER COUNTRIES USING CUSTOMS AND SECTION 337 CASES

With Amazon and Ebay having increased their efforts at bringing in Chinese sellers and with more and more Chinese manufacturers branching out and making their own products, the number of companies contacting our China lawyers here at Harris Moure about problems with counterfeit products and knockoffs has soared. If the problem involves infringing products being imported into the United States, powerful remedies are available to companies with US IP rights if the infringing imports are products coming across the US border.

If the IP holder has a registered trademark or copyright, the individual or company holding the trademark or copyright can go directly to Customs and record the trademark under 19 CFR 133.1 or the copyright under 19 CFR 133.31.  See https://iprr.cbp.gov/.

Many years ago a US floor tile company was having massive problems with imports infringing its copyrights on its tile designs.  Initially, we looked at a Section 337 case as described below, but the more we dug down into the facts, we discovered that the company simply failed to register its copyrights with US Customs.

Once the trademarks and copyrights are registered, however, it is very important for the company to continually police the situation and educate the various Customs ports in the United States about the registered trademarks and copyrights and the infringing imports coming into the US.  Such a campaign can help educate the Customs officers as to what they should be looking out for when it comes to identifying which imports infringe the trademarks and copyrights in question.  The US recording industry many years ago had a very successful campaign at US Customs to stop infringing imports.

For those companies with problems from Chinese infringing imports, another alternative is to go to Chinese Customs to stop the export of infringing products from China.  The owner of Beanie Babies did this very successfully having Chinese Customs stop the export of the infringing Beanie Babies out of China.

One of the most powerful remedies is a Section 337 case, which can block infringing products, regardless of their origin, from entering the U.S.  A Section 337 action (the name comes from the implementing statute, 19 U.S.C. 1337) is available against imported goods that infringe a copyright, trademark, patent, or trade secret. But because other actions are usually readily available to owners of registered trademarks and copyrights, Section 337 actions are particularly effective for owners of patents, unregistered trademarks, and trade secrets. Although generally limited to IP rights, in the ongoing Section 337 steel case, US Steel has been attempting to expand the definition of unfair acts to include hacking into computer systems and antitrust violations.

The starting point is a section 337 investigation at the US International Trade Commission (“ITC”).  If the ITC finds certain imports infringe a specific intellectual property right, it can issue an exclusion order and U.S. Customs will then keep out all the infringing imports at the border.

Section 337 cases have been brought and exclusion orders issued against a vast range of different products: from toys (Rubik’s Cube Puzzles, Cabbage Patch Dolls) to footwear (Converse sneakers) to large machinery (paper-making machines) to consumer products (caskets, auto parts, electronic cigarettes and hair irons) to high tech products (computers, cell phones, and semiconductor chips).

Section 337 is a hybrid IP and trade statute, which requires a showing of injury to a US industry. The injury requirement is very low and can nearly always be met–a few lost sales will suffice to show injury. The US industry requirement can be a sticking point. The US industry is usually the one company that holds the intellectual property right in question. If the IP right is a registered trademark, copyright or patent, the US industry requirement has been expanded to not only include significant US investment in plant and equipment, labor or capital to substantial investment in the exploitation of the IP right, including engineering, research and development or licensing.  Recently, however, the ITC has raised the US industry requirement to make it harder for patent “trolls” or Non Practicing Entities to bring 337 cases.

Section 337 cases, however, are directed at truly unfair acts.  Patents and Copyrights are protected by the US Constitution so in contrast to antidumping and countervailing duty cases, respondents in these cases get more due process protection.  The Administrative Procedures Act is applied to Section 337 cases with a full trial before an Administrative Law Judge (“ALJ”), extended full discovery, a long trial type hearing, but on a very expedited time frame.

Section 337 actions, in fact, are the bullet train of IP litigation, fast, intense litigation in front of an ALJ.  The typical section 337 case takes only 12-15 months. Once a 337 petition is filed, the ITC has 30 days to determine whether or not to institute the case. After institution, the ITC will serve the complaint and notice of investigation on the respondents. Foreign respondents have 30 days to respond to the complaint; US respondents have only 20 days. If the importers or foreign respondents do not respond to the complaint, the ITC can find the companies in default and issue an exclusion order.

The ITC’s jurisdiction in 337 cases is “in rem,” which means it is over the product being imported into the US. This makes sense: the ITC has no power over the foreign companies themselves, but it does have power over the imports. What this means in everyday terms is that unlike most regular litigation, a Section 337 case can be effectively won against a Chinese company that 1) is impossible to serve, 2) fails to show up at the hearing, and 3) is impossible to collect any money from.

The remedy in section 337 cases is an exclusion order excluding the respondent’s infringing products from entering the United States. In special situations, however, where it is very easy to manufacture a product, the ITC can issue a general exclusion order against the World.  In the Rubik’s Cube puzzle case, which was my case at the ITC, Ideal (the claimant) named over 400 Taiwan companies as respondents infringing its common law trademark. The ITC issued a General Exclusion Order in 1983 and it is still in force today, blocking Rubik’s Cube not made by Ideal from entering the United States. In addition to exclusion orders, the ITC can issue cease and desist orders prohibiting US importers from selling products in inventory that infringe the IP rights in question

Section 337 cases can also be privately settled, but the settlement agreement is subject to ITC review. We frequently work with our respondent clients to settle 337 cases early to minimize their legal fees. In the early 1990s, RCA filed a section 337 case against TVs from China. The Chinese companies all quickly settled the case by signing a license agreement with RCA.

Respondents caught in section 337 cases often can modify their designs to avoid the IP right in question. John Deere brought a famous 337 case aimed at Chinese companies that painted their tractors green and yellow infringing John Deere’s trademark. Most of the Chinese respondents settled the case and painted their tractors different colors, such as blue and red.

Bottom Line: Section 337 cases are intense litigation before the ITC, and should be considered by U.S. companies as a tool for fighting against infringing products entering the United States. On the flip side, US importers and foreign respondents named in these cases should take them very seriously and respond quickly because exclusion orders can stay in place for years.

 

If you have any questions about these cases or about the antidumping or countervailing duty law, US trade policy, trade adjustment assistance, customs, or 337 IP/patent law in general, please feel free to contact me.

Best regards,

Bill Perry

US China Trade War — TPP, Three False Trade Arguments, China President Trip, Trade, Customs, IP/Patent Securities

US Capital Pennsylvania Avenue After the Snow Washington DCTRADE IS A TWO WAY STREET

“PROTECTIONISM BECOMES DESTRUCTIONISM; IT COSTS JOBS”

PRESIDENT RONALD REAGAN, JUNE 28, 1986

US CHINA TRADE WAR NEWSLETTER OCTOBER 23, 2015

IMPORT ALLIANCE MEETINGS NOVEMBER 17th and 18th WASHINGTON DC       

As indicated in more detail below, the Import Alliance will have meetings on November 17th and 18th in Washington DC. On the afternoon of November 17th, we will meet in our Washington DC office and then on November 18th meet with a Congressmen and Congressional Trade Staff to discuss the issues of retroactive liability of US importers in US antidumping and countervailing duty cases and market economy for China in December 2016 as provided in the US China WTO Agreement and the China WTO Agreement.

We welcome participation from US importers and US downstream customers. Please feel free to contact me or the Import Alliance directly. See the attached pamphlet for more information. FINAL IAFA_November2015_Flyer

US CHINA TRADE WAR NEWSLETTER UPDATE NOVEMBER 6, 2015

Dear Friends,

The USTR released the test of the Trans Pacific Agreement (“TPP”) yesterday.  This has provoked another fire storm in Washington DC and we will be sending out another blog post detailing the reaction.

But now the clock starts ticking and the release of the text means that President Obama can sign the TPP on January 4th, 60 days after releasing the text of the Agreement.  The Congress could theoretically pass the TPP on February 3, 2015, 30 days after President Obama signs it.

But in talking with a Congressional trade staffer on Capitol Hill yesterday, it does not appear to be moving that quickly, but on the other hand I suspect that Congress will not wait until the Lame Duck session either after the November Presidential election.

2016 will certainly be an interesting time in the Trade area.

If you have any questions, please feel free to contact me.

Best regards,

Bill Perry

TPP TEXT RELEASED TODAY

Yesterday, November 5, 2015, the United States Trade Representative Office (“USTR”) released the text of the Trans Pacific Partnership Agreement.  This is an enormous trade agreement covering 12 countries, including the United States, Australia, Brunei, Canada, Chile, Japan, Malaysia, Mexico, New Zealand, Peru, Singapore and Vietnam, and covers 40% of the World’s economy. To read more about the TPP and the political negotiations behind the Agreement see blog post below and past blog posts on this site.

The text of the Agreement is well over 800 pages. We have downloaded the text of the various Chapters, which are listed below.

We have broken the Agreement down into three parts and have added consecutive page numbers to the Agreement in the right hand lower corner to make the Agreement easier to navigate.

For specific tariff changes on specific products, look at attached Chapter 2 National Treatment and Market Access for Goods, Chapters 1 – 2 – Bates 1 – 4115.  This is the largest document because it includes all imported items by tariff number.  But this is the section that will impact most companies.

The other parts of the text covering Chapters 3 to 30 is attached, Chapters 3 – 30 – Bates 4116 – 5135,  along with the Appendices, Annex 1 – 4 – Bates A-1-1074.

We will also be preparing an analysis of each Chapter, which will release in a the near future through a blog post.

USTR LIST OF CHAPTERS AND OTHER PARTS OF TPP AGREEMENT

Chapters

Preamble

  1. Initial Provisions and General definitions (Chapter Summary)
  1. National Treatment and Market Access (Chapter Summary)

Annex 2-D: Tariff Commitments
Australia General Notes to Tariff Schedule
Australia Tariff Elimination Schedule
Brunei General Notes to Tariff Schedule
Brunei Tariff Elimination Schedule
Canada General Notes to Tariff Schedule
Canada Tariff Elimination Schedule
Canada Appendix A Tariff Rate Quotas
Canada Appendix B Japan Canada Motor Vehicle NTM
Chile General Notes to Tariff Schedule
Chile Tariff Elimination Schedule
Japan General Notes to Tariff Schedule
Japan Tariff Elimination Schedule
Japan Appendix A Tariff Rate Quotas
Japan Appendix B 1 Agricultural Safeguard Measures
Japan Appendix B 2 Forest Good Safeguard Measure
Japan Appendix C Tariff-Differentials
Japan Appendix D Appendix between Japan and the United States on Motor Vehicle Trade
Japan Appendix E Appendix between Japan and Canada on Motor Vehicle Trade
Malaysia General Notes to Tariff-Schedule
Malaysia Tariff Elimination-Schedule
Malaysia Appendix A Tariff Rate Quotas
Mexico General Notes to Tariff Schedule
Mexico Appendix A, B and C Tariff Rate Quotas and Tariff Differentials
Mexico Tariff Elimination Schedule
New Zealand General Notes to Tariff Schedule
New Zealand Tariff Elimination Schedule
Peru General Notes to Tariff-Schedule
Peru Tariff Elimination Schedule
Singapore General Notes to Tariff Schedule
Singapore Tariff Elimination Schedule
US General Notes to Tariff Schedule
US Tariff Elimination-Schedule
US Appendix A Tariff Rate Quotas
US Appendix B Agricultural Safeguard Measures
US Appendix C Tariff Differentials
US Appendix D Motor Vehicle Trade
US Appendix E Earned Import Allowance Program
Viet-Nam General Notes to Tariff Schedule
Viet-Nam Tariff Elimination Schedule
Viet-Nam Appendix A Tariff Rate Quotas

  1. Rules of Origin and Origin Procedures (Chapter Summary)

Annex 3-D: Product Specific Rules
Annex 3-D: Appendix 1—Automotive

  1. Textiles and Apparel (Chapter Summary)

Annex 4-A: Textiles Product Specific Rule
Annex 4-A Appendix: Short Supply List

  1. Customs Administration and Trade Facilitation (Chapter Summary)
  1. Trade Remedies (Chapter Summary)
  1. Sanitary and Phytosanitary measures (Chapter Summary)
  1. Technical Barriers to Trade (Chapter Summary)
  1. Investment (Chapter Summary)
  1. Cross Border Trade in Services (Chapter Summary)
  1. Financial Services (Chapter Summary)
  1. Temporary Entry for Business Persons (Chapter Summary)

Annex 12-A: Temporary Entry for Business Persons
Australia, Brunei, Canada, Chile, Japan, Malaysia, Mexico, New Zealand, Peru, Singapore, Viet Nam

  1. Telecommunications (Chapter Summary)
  1. Electronic Commerce (Chapter Summary)
  1. Government Procurement (Chapter Summary)

Annex 15-A: Government Procurement
Australia, Brunei, Canada, Chile, Japan, Malaysia, Mexico, New Zealand, Peru, Singapore, United States, Viet Nam

  1. Competition (Chapter Summary)
  1. State-Owned Enterprises (Chapter Summary)
  1. Intellectual Property (Chapter Summary)
  1. Labour (Chapter Summary)

US-BN Labor Consistency Plan
US- MY Labor Consistency Plan
US-VN Plan for Enhancement of Trade and Labor Relations

  1. Environment (Chapter Summary)
  1. Cooperation and Capacity Building (Chapter Summary)
  1. Competitiveness and Business Facilitation (Chapter Summary)
  1. Development (Chapter Summary)
  1. Small and Medium-Sized Enterprises (Chapter Summary)
  1. Regulatory Coherence (Chapter Summary)
  1. Transparency and Anti-corruption (Chapter Summary)
  1. Administration and Institutional Provisions (Chapter Summary)
  1. Dispute Settlement (Chapter Summary)
  1. Exceptions (Chapter Summary)
  1. Final Provisions (Chapter Summary)

Annex I: Non-Conforming Measures
Consolidated Formatting Note
Australia,  Brunei, Canada, Chile, Japan, Malaysia, Mexico, New Zealand, Peru, Singapore, United States, Viet Nam
Annex II: Non-Conforming Measures Consolidated Formatting Note
Australia, Brunei, Canada, Chile, Japan, Malaysia, Mexico, New Zealand, Peru, Singapore, United States, Viet Nam

Annex III: Financial Services Consolidated Formatting Note
Australia, Brunei, Canada, Chile, Japan, Malaysia, Mexico, New Zealand, Peru, Singapore, United States, Viet Nam

Annex IV: State-Owned Enterprise
Australia, Brunei, Canada, Chile, Malaysia, Mexico, New Zealand, Peru, United States, Viet Nam

Related Instruments

Market Access Related

US- AU Letter Exchange re Recognition of FTA TRQs in TPP

US-AU Letter Exchange on Sugar Review

US-CA Letter Exchange on Milk Equivalence

US-CA Letter Exchange on Agricultural Transparency

US-CL Letter Exchange on Distinctive Products

US-CL Letter Exchange regarding Recognition of FTA TRQs in TPP

JP Exchange of Letters on Distinctive Products

JP to US Letter on Safety Regulations for Motor Vehicles

US-JP Letter Exchange on Operation of SBS Mechanism

US-JP Letter Exchange on Operation of Whey Protein Concentrate Safeguard

US-JP Letter Exchange regarding Standards of Fill

US-JP Letters related to the PHP

US-MY Letter Exchange on Auto Imports

US-MY Letter Exchange on Distinctive Products

US-NZ Letter Exchange on Distinctive Products

US-PE Letter Exchange on Distinctive Products

US-PE Letter Exchange on TRQs and Safeguards

US-VN Letter Exchange on Catfish

US-VN Letter Exchange on Distinctive Products of US

US-VN Letter Exchange on Distinctive Products of VN

US-VN Letter Exchange on Offals

Textiles and Apparel Related

US-BN Letter Exchange on Textiles and Apparel

US-MY Letter Exchange on Registered Textile and Apparel Enterprises

US-SG Exchange on Letters on Textiles and US-SG FTA

US-VN Letter Exchange on Registered Textile and Apparel Enterprises

Sanitary and Phytosanitary Related

US-CL SPS Letter Exchange regarding Salmonid Eggs

Intellectual Property Related

US-AU Letter Exchange on Selected IP Provisions

US-AU Letter Exchange on Article 17.9.7(b) of AUSFTA

US-CA Letter Exchange on IP Border Enforcement

US-CL Letter Exchange re Geographical Indications

US-CL Letter Exchange re Article 17.10.2 of US Chile FTA

US-JP Letter Exchange re Copyright Term

US-MY Letter Exchange re Articles 18.41 .50 and .52

US-MY Letter Exchange re Geographical Indications

US-MX Letter Exchange re Geographical Indications

US-MX Letter Exchange re Tequila and Mezcal

US-PE Letter Exchange re Article 16.14.3 of US-Peru TPA

US-VN Letter Exchange on Biologics

US-VN Letter Exchange re Geographical Indications

Services/Financial Services/E-Commerce

US-CL Letter Exchange regarding Express Delivery Services

US-VN Letter Exchange on Pharmaceutical Distribution

US-VN Letter Exchange regarding Electronic Payment Services

US-AU Letter Exchange on Privacy

Temporary Entry

US-JP Letter Exchange re Temporary Entry

Government Procurement

US-AU Letter Exchange on AUSFTA GP Thresholds

US-CA Letter Exchange re GP Thresholds

Letter Exchange US-CA-MX re GP Procedures

SOEs

US-SG Letter Exchange on SOE Transparency

Environment

US-CL Understanding regarding Fisheries Subsidies and Natural Disasters

US-MY Exchange of Letters on Committee to Coordinate Implementation of Environment Chapters

US-PE Understanding regarding Biodiversity and Traditional Knowledge

US-PE Understanding regarding Conservation and Trade

Annex on Transparency and Procedural Fairness for Pharmaceutical Products and Medical Devices

US-AU Letter Exchange on Transparency and Procedural Fairness for Pharmaceuticals and Medical Devices

US-JP Transparency and Procedural Fairness for Pharmaceuticals and Medical Devices

US-PE Understanding re Transparency and Procedural Fairness for Pharmaceuticals and Medical Devices

US-Japan Bilateral Outcomes

US-Japan Motor Vehicle Trade Non-Tariff Measures

US-JP Letter Exchange on Certain Auto NTMs

JP to US Letter on Motor Vehicle Distribution Survey

Japan Parallel Negotiations on Non-Tariff Measures

US-JP Letter Exchange on Non-Tariff Measures

Joint Declaration of the Macroeconomic Policy Authorities of

CURRENCY MANIPULATION TEXT

On November 5, 2015, the Treasury Department released the attached text of the Currency Manipulation side deal, Press Release – 12 Nation Statement on Joint Declaration Press Release – Joint Declaration Fact Sheet TPP_Currency_November 2015, stating:

Trans-Pacific Partnership Countries

For the first time in the context of a free trade agreement, countries have adopted a Declaration that addresses unfair currency practices by promoting transparency and accountability.

All TPP countries commit to avoid unfair currency practices and refrain from competitive devaluation.

TPP countries will publicly report their foreign-exchange intervention and foreign reserves data, some for the first time.

Officials from all TPP countries will consult regularly to address macroeconomic issues, including to engage on efforts to avoid unfair currency practices.

 

Dear Friends,

This October post will comment on the TPP Agreement in more detail as  well as President Xi Jinping’s recent trip to the US and my impressions from Beijing, China during that period, discuss the three flawed trade arguments against China, and also discuss Trade Policy, Trade, Steel and the OCTG case, IP/patent, China antitrust and securities.

As stated below, on October 5th in Atlanta, Trade ministers from the U.S. and 11 other nations, including Japan, Canada, Mexico, Australia, New Zealand, Vietnam and Malaysia, reached an agreement on the Trans-Pacific Partnership (“TPP”), which will link up 40 percent of the world’s economy.  President Obama cannot sign the Agreement for a minimum of 60 days after releasing the Agreement to the public. Congress cannot consider and pass the Agreement for a minimum of 30 days after that.

The real question, however, is whether the TPP can pass Congress. Although January was a possible period for Congressional consideration, some Congressional staffers are saying that it will not come until April or possibly in the lame duck session after the Presidential/Congressional election. That would be right in the middle of the Presidential election and all bets are off.

From much of the US Press point of view, President Xi’s recent trip to the US was based on deception with the Chinese government having no real interest in coming to agreement on the US China trade problems on environment, cybersecurity, bilateral investment treaty and other hot button issues. In Beijing, China, however, Chinese television was truly involved in a love fest with the United States.

In the United States, we see cynicism. In China, I saw real friendship for the United States, and a determination to work with the United States in partnership based on a win-win principle that both sides must benefit from the relationship. This is the problem of the US China relationship in a nutshell. Never give any credit to China where credit is due and where they are making efforts to solve the bilateral problems.

Fortunately for the United States, China understands the importance of the US China relationship better than many US politicians and the US press. To be specific, there is more than $500 billion in trade between the United States and China annually with US exports, including services, coming close to $200 billion. As stated above, trade is a two way street, and very few US politicians acknowledge the huge US exports to China, which create US jobs.

The Chinese government has agreed to do one very important thing with regards to the problems with the US government—talk about it. For the last several years, twice a year China and the US have conducted negotiations in the SED and JCCT talks. Now as a result, China will have periodic negotiations on cyber-attacks. In great contrast to Russia, China believes firmly in negotiations with the United States to iron out differences and that is very important for the future of US China relationship.

Also this newsletter discusses the three flawed arguments against China: Cyber Attacks, Currency Manipulation and Dumping and the problem that they foster/create a feeling of international trade victim, which leads to protectionism and a loss of jobs.

The real victims of the trade wars are upstream and downstream producers, such as US based, REC Silicon, a US exporter and major manufacturer of polysilicon and victim of the US China Solar Trade War, as it announces that it may close its US plant in Moses Lake, Washington because it is shut out of China.

Best regards,

Bill Perry

TPP SHOULD PASS CONGRESS BUT 2016 IS AN ELECTION YEAR AND ANYTHING CAN HAPPEN

As stated above, on October 5th, in Atlanta Trade ministers from the U.S. and 11 other nations, including Japan, Canada, Mexico, Australia, New Zealand, Vietnam and Malaysia, reached an agreement on the Trans-Pacific Partnership (“TPP”), which will link up 40 percent of the world’s economy. Some of the key issues in the TPP are:

  • Cut Tariffs on 18,000 products
  • New special 2 year safeguard for Certain domestic industries that face a surge in imports
  • State-owned companies with TPP Countries must conduct commercial activities in accordance with market- based considerations
  • Vietnam must allow formation of independent labor unions
  • Malaysia will face trade retaliation if it does not improve its forced labor and human trafficking record
  • Bar countries from requiring the localized storage of data or surrender valuable source codes as condition of market entry
  • Require parties to commit to sustainable forest management and conserve at risk plants and animals.

A quick look at the latest statements from USTR, the White House and the Department of Agriculture indicate that two areas will see major benefits – Agriculture and Services, including banking and legal services. Also a number of manufacturing and high tech products will see substantial benefits.

The TPP would phase out thousands of import tariffs as well as other barriers to international trade, such as Japanese regulations, that keep out some American-made autos and trucks. It also would establish uniform rules on corporations’ intellectual property and open the Internet even in Vietnam.

USTR has stated the TPP would end more than 18,000 tariffs that the TPP countries have placed on US exports, including autos, machinery, information technology and consumer goods, chemicals and agricultural products, such as avocados in California and wheat, pork and beef from the Plains states.

Right after the Atlanta agreement, USTR Michael Froman stated in an interview:

In sector after sector, our workers are the most productive in the world. Our farmers and ranchers are globally competitive. Our manufacturing plants are globally competitive. If there’s a level playing field, we can compete, and we believe we can win.

Froman further stated that the US, which has an average tariff of approximately 1.4 percent, faces tariffs twice as high when US companies export to other countries. Froman also stated that Iowa would benefit from decreases in tariffs on pork, currently as high as 388 percent, and beef, which are as high as 50 percent:

“We already know there’s great demand for American beef in Japan,” where the beef tariff would ultimately drop to 9 percent from 38.5 percent currently.”

Tariffs on beer, some as high as 47 percent in certain TPP countries, will be “eliminated”

Froman further stated,

We’re working with the other countries to finalize details of the text and put it through a legal scrub.” In the meantime, “we’re having ongoing conversations with congressional leadership and our congressional partners about the process going forward”

On October 16th, however, during a Council on Foreign Relations conference call, USTR Froman also stated that the TPP could not be renegotiated and expressed confidence that Congress would eventually pass the TPP Agreement, stating:

“This is a different kind of agreement than other [free trade agreements] we’ve negotiated; other negotiations have tended to be between the U.S. and one other trading partner. It’s infinitely more complex when you’ve got 11 other trading partners at the table. This isn’t one of those agreements where [you can] reopen an issue or renegotiate a provision.”

Froman conceded that some TPP countries will need “capacity building to technical assistance” when it comes to implementation and enforcement in areas such as patent systems and promoting independent unions, but noted that U.S. officials are working to address concerns voiced by skeptics in government and industry:

“We’re working with Congress, we’re working with the other agencies to develop a full plan for the monitoring and enforcement of TPP. And we’re working with the U.S. Department of Labor on the enforcement of labor provisions, working with our embassies, people on the ground who can help monitor the implementation and cite enforcement issues as they arise.”

Froman further stated:

“TPP presents a choice between two futures, one in which the U.S. is helping to lead on trade and starting a race to the top in terms of global standards, and the other where we take a backseat or sit on the sidelines and allow a race to the bottom that would undermine U.S. influence around the world and result in a lower standard, less open global trading system.”

According to Paulson Institute, in addition to agriculture and manufacturing, the TPP will cause substantial growth in the service industries, including the legal and banking industries. The elimination of services barrier in the TPP countries could lead U.S. services exports to jump by $300 billion. The Paulson Institute further stated a major reason:

“high barriers to service imports and investment that now prevail in TPP countries will be lowered. The barriers include outright bans, quotas, restrictive licenses, buy-national procurement rules, and discriminatory access to distribution networks.”

Meanwhile five former Democratic National Committee chairmen urged party members and Congress to support the 12-nation Trans-Pacific Partnership, arguing that the pact will ultimately benefit American workers and businesses by expanding labor rights around the world.

Automobile tires made in Ohio that face tariffs or foreign taxes as high as 40 percent would be eliminated.  According to Josh Earnest, White House press secretary:

“The TPP actually goes one step further by making sure that manufacturers aren’t at a disadvantage when they sell their tires abroad to any of our 11 TPP countries. So Ohio is a good example.”

According to Earnest, leather boots that are shipped from Texas to TPP countries face foreign taxes as high as 30 percent, which would be eliminated, along with tariff elimination or reduction on exports of US-made bourbon whisky, Port wine, Michigan cars and Missouri barbecue sauce.

The agreement will immediately cut in half and eventually eliminate Japan’s 8.5 percent tariff on imports of fresh cherries. On October 6, 2015, Secretary of Agriculture Tom Vilsack stated:

“The TPP is a high-value, high-standards agreement that will allow the U.S. and other nations to counter Chinese influence in the region. History will tell us that agriculture is a winner every time in trade deals, and TPP is going to be no exception to that history.”

Vilsack stated that some of the agricultural products that will see lower tariffs are U.S. beef, pork, produce, nuts and wine. TPP will reduce Japanese tariffs on beef imports from 38.5 percent to 9 percent, and Japan also will eliminate 80 percent of its pork tariffs in 11 years.

Highly protected dairy industries in Canada and Japan also will be opened to limited import access. Japan has a 40 percent tariff on cheese, which will be eliminated under the TPP, and the country established a low-tariff quota for milk powder and butter equivalent to 70,000 tons of raw milk. Canada granted duty-free access to 3.25 percent of its dairy sector.

Vilsack said historic reductions in tariffs on U.S. exports should indicate that the TPP is a “net winner” and that failing to grasp the opportunity to sell more U.S. products to a rapidly expanding middle class in the Asia Pacific would be a mistake.

With regards to dairy products, Vilsack stated:

“When it came to Canada and Japan, we pushed for as strong access as possible and focused on the most lucrative products for the U.S. At the same time, we were somewhat sensitive to New Zealand expanding access in the U.S.”

The U.S. dairy industry in 2014 said it was prepared to eliminate all tariffs affecting trade with Canada and Japan if they did the same. In the end, the U.S. had to pull back when it became apparent the two countries weren’t ready to go from “zero to 100.”  Japan, which counts dairy among its five sensitive agricultural commodities protected by a politically influential union of farmer cooperatives and tariffs and quotas, committed to phasing out tariffs on cheese over 16 years and created low-tariff quotas for milk powder and butter.

Those offers meant the U.S. had to balance New Zealand’s requests for a completely liberalized international dairy market resembling its own, where there are no tariffs. Dairy also is New Zealand’s No. 1 export and can move into new markets quickly. The U.S. agreed in 20 to 30 years to eliminate tariffs on less sensitive products like milk powder and non-fat dry milk from Australia, Canada and New Zealand, and allow additional butter and cheese imports through tariff-rate quotas. All tariffs on dairy products from Japan, Malaysia and Vietnam would be gone within 20 years. The U.S. also will have safeguard measures for milk powders and some cheese to combat potential import surges.

Jim Mulhern, president and chief executive officer of the National Milk Producers Federation (NMPF), stated:

“Based on information available to date, it appears that our industry has successfully avoided the type of disproportionate one-way street that we were deeply concerned could have resulted under this agreement. New Zealand did not get the unfettered access to the U.S. market that it long sought; but Japan and Canada did not open their markets to the degree we sought.”

The entire U.S. horticulture sector is the hidden winner in the TPP agricultural deal. All tariffs would go to zero if TPP were implemented in countries like Japan, Vietnam and Malaysia that currently have high taxes on imports. Japan imposes an 8.5 percent tariff on frozen French fries, which would be eliminated in four years, and a 20 percent tariff on dehydrated potatoes that would be phased out over six years.  Once the TPP is implemented, more than 50 percent of U.S. farm goods will get immediate duty-free treatment in Japan, most of which are horticultural products, such as grapes, strawberries, walnuts, almonds, raisins and certain fruit juices. Vietnam has tariffs up to 40 percent on vegetable imports that would end within 11 years, while Malaysia would immediately eliminate tariffs as high as 90 percent.

To see a White House video on how the TPP works and benefits exports of Washington State Cherries, see https://www.whitehouse.gov/issues/economy/trade#cherry.

The real question, however, is whether the TPP can pass Congress. Although January was a possible period for Congressional consideration, some Congressional staffers stated that it would not come until April. Recently, statements have been made that there will be no vote on TPP until the lame duck session in Congress after the Presidential/Congressional elections in November 2016. Recently, however, the White House indicated that it wants a Congressional vote on the TPP before the Lame Duck session.

The first question, however, is when will the actual text of the TPP be released to the Public and that apparently will not happen until late November, which means President Obama cannot sign the Agreement until 60 days later and the Congress cannot pass it until 30 days after that.

But this time deadline seems to be moving away as there are further negotiations to clean up the legal terms in the Agreement, especially on currency manipulation. This will mean that the TPP will be a major issue in the Presidential primary and election, which makes it more difficult.

On October 5th, Senator Sessions, a well-known Republican Senator, who opposes TPP, told Breitbart news that it is possible to kill the TPP bill, but then following the law he stated that the Bill does not require 60 votes to pass filibuster in the Senate or 67 votes because it is a treaty:

“I think it’s possible. When they passed fast track, they got 60 votes… The treaty itself now is no longer subject to supermajority or filibuster. It will pass with a simple majority. It cannot be amended: it’ll be brought up one day and voted on the next day with no amendments– up or down. And in the past, they’ve always passed. And I think that will be what experts will tell you today, but I think the American people are getting more and more uneasy about the effect of trade and the promises that our trading partners are going to comply with their part of the bargain and that we’re all going to benefit have not been real . . . .”

But since the TPP only requires a simple majority to pass the Senate, not the 60 votes to pass Trade Promotion Authority (“TPA”), it should pass but now the ball is truly in the Court of Senators Orrin Hatch, Chairman of the Senate Finance Committee, Senator Ron Wyden, Ranking Democratic Member of the Senate Finance Committee, and Representative Paul Ryan, Chairman of the House Ways and Means Committee. All three members are in the Center of their respective parties. No matter what the Press states, Senator Hatch is not on the extreme right wing of the Republican party and neither is Paul Ryan. If they approve the TPP, a majority of Republican members should stay with them.

The heaviest lift, however, will be on the Democratic side by Senator Ron Wyden because the majority of the Democratic Party is against the Free Trade Agreement because of the power of the Unions. The only reason the TPA bill passed in late July is that the Republicans won the mid-term elections in 2014. If the Democrats has won, Senator Harry Reid had already stated that the TPA bill would not have come to the floor. But to pass the TPA bill through the Senate, the Republicans still needed Democratic votes because of the 60 vote filibuster rule. The TPA bill received 62 votes, but just 62 and no more with a number of Democratic votes, including Senators Patty Murray and Maria Cantwell from Washington State, to replace the Republican Senators, such Senator Sessions and Senator Rand Paul, who voted against the Agreement.

But these three members, Hatch, Wyden and Ryan are critical to the passage of the TPP. One problem is that October 5th, the day of the announcement, Senate Finance Committee Chairman Orrin Hatch stated that although the details of the TPP “are still emerging, unfortunately I am afraid this deal appears to fall woefully short.” Also listen to his October 8th phone call on CSPAN https://www.youtube.com/watch?v=F2T6xA7XMuY when he explains his concerns in more detail.

Another problem is the turmoil in the House of Representatives over the next speaker. Paul Ryan’s name has been mentioned, but some conservative members are against Ryan because of his stand on the TPP. As the Wall Street Journal stated on October 21, 2015 in its editorial entitled, The Ryan Stakes:

“He has impeccable conservative credentials. . . . Yet in the last week some on the right have come out against Mr. Ryan because he supposedly is not conservative enough – in particular because he favors free trade . . . .”

The Administration will have some heavy lifting to persuade Senators Hatch, Wyden and Representative Ryan that the TPP does meet the high standards set by the Congress in the TPA legislation in July. But if these three lawmakers approve, a majority of the members in the Senate and House should pass the TPP.

Other lawmakers that will be critical in this upcoming battle are in the Senate, Republican Senator Mitch McConnell and Democratic Senators Patty Murray and Maria Cantwell from Washington State and in the House, Republican representatives Pat Tiberi and Dave Reichert on the Subcommittee on Trade, House Ways and Means. Also important in the House, will be the 50 member New Dem Coalition, which is pro international trade and pro economic growth, such as Representatives Ron Kind, Rick Larson, Derek Kilmer and Suzan DelBene. See the Politico article, which describes the New Democrat Coalition in detail at   http://www.politico.com/story/2015/08/new-dems-plan-assertive-new-presence-in-house-121208.html. See also http://www.newdempac.com.

But Democrats have felt significant pressure from environmental groups and labor unions, who are fiercely opposed to the accord. Meanwhile, Republicans have struggled to strike a balance between support for free trade in general and the deep mistrust of giving Obama more power among GOP voters.

But as stated above, 2016 is an election year, and in contrast to several Republican candidates, such as Marco Rubio, Jeb Bush, and John Kasich, which are inclined to support the Agreement, but want to read it first, Donald Trump on the Republican side and Bernie Sanders on the Democratic side are both fighting hard against the TPP. It is interesting to note that the extreme Right of the Republican party, Donald Trump, and the extreme Left of the Democratic party, Bernie Sanders, both have a common goal to stop the Trade Agreement and send the United States back to protectionism. They are both populists and they know that being protectionist stirs up the bases.

Keep in mind that the Unions are solidly behind Sanders and recently the Teamsters told the Clinton campaign that they would not endorse her because they wanted to talk to Trump first. They like Trump’s stand on the trade agreements, including TPP.

Trump has taken the strongest position against TPP or Obamatrade as he calls it — making opposition to global trade policies and trade agreements one of the key issues of his campaign. In a quote to Breitbart News, even though he has not read the Agreement, GOP frontrunner Donald Trump hammered President Barack Obama for failing the American worker with the TPP stating:

“The incompetence and dishonesty of the President, his administration and—perhaps most disturbing—the Congress of the United States are about to place American jobs and the very livelihoods of Americans at risk . . . . The only entities to benefit from this trade deal will be other countries, particularly China and Japan, and big corporations in America. . . .”

Trump indicated that if crony capitalism were not bad enough, then sticking it to unions, small businesses and everyday Americans seems to be the new blood sport inside the Washington DC Beltway.

“If this was such a good deal, why was there not more transparency? Why are we striking trade agreements with countries we already have agreements with? Why is there no effort to make sure we have fair trade instead of ‘free’ trade that isn’t free to Americans? Why do we not have accompanying legislation that will punish countries that manipulate their currencies to seek unfair advantage in trade arrangements? Why has the Congress not addressed prohibitive corporate tax rates and trade agreements that continue to drain dollars and jobs from America’s shores?”

Trump finally stated:

“It’s time for leadership in Washington It’s time to elect a President who will represent the only special interest not getting any attention—The American People. It’s time to send a real businessman to the White House. It’s time to Make America Great Again.”

For full article see http://www.breitbart.com/big-government/2015/10/05/exclusive-donald-trump-declares-war-on-obamatrade-time-to-send-a-real-businessman-to-white-house-to-end-this/.

By the way, if you want to see one video circulating China now, it is Trump blaming China 234 times for all the US economic problems. http://www.huffingtonpost.com/entry/donald-trump-says-china_55e06f30e4b0aec9f352e904

In regards to the TPP, Trump’s major argument is that we have lousy negotiators in Washington DC and he will appoint better negotiators if he becomes President. The TPP, however, has been negotiated by the United States Trade Representative’s office (“USTR”) for more than five years. USTR’s officials are considered the top trade officials/negotiators in the US Government, and Ambassador Froman, who heads up USTR, is a trade pro, liked by both Democrats and Republicans in Congress.

Bottom line is the TPP deal is probably the best deal the US could get under the circumstances. Just having a tough negotiator, does not mean that there would be a better deal. All of international trade law is based on reciprocity and what the US can do to other countries, those countries can do back.

In contrast to Trump, the Washington Post likes the deal. On October 5th, it issued an editorial stating:

“The Trans-Pacific Partnership is a trade deal worth celebrating

The United States and 11 other nations concluded the long-awaited Trans-Pacific Partnership trade deal, or TPP, on Monday -demonstrating that it is still possible for this country to exercise world leadership, and to do big things in its own national interest, given consistent White House leadership and sufficient bipartisan support in Congress.

As President Obama sees it, the TPP would achieve both economic and strategic goals. By slashing tariffs and harmonizing regulatory regimes covering 40 percent of the global economy, the deal would spur growth in the United States and abroad. By knitting the U.S. and Japanese economies together in their first free-trade deal-and binding both of them closer to rising Asian nations-the TPP would create a counterweight to China in East Asia. Not incidentally, the deal would also help Japan’s prime minister, Shinzo Abe, overcome domestic interest-group resistance to reforming his nation’s sclerotic economy.

Those arguments persuaded bipartisan majorities of the Republican-controlled Congress to empower Mr. Obama’s negotiating team with so-called “fast-track” authority this year, and, as predicted, that vote helped win substantial new access to the Japanese and other markets for U.S. producers, as well as provisions on the environment and labor rights -including Vietnam’s first acceptance of possible independent trade unions.

In granting the administration fast-track authority, Congress rejected claims from a legion of critics to the effect that the TPP would sell out U.S. workers, the environment or even public health. In fact, the tentative deal would ensure that a controversial dispute arbitration system is more transparent and cannot be used by tobacco makers to escape member nations’ tough regulations. The U.S. team also struck a compromise designed to protect the legitimate intellectual property interests of American drugmakers without depriving poor nations of access to life-saving medicine.

It’s good that the critics lost the fast-track debate in Congress; but it’s not bad we had that debate, because it helped U.S. negotiators identify areas of legitimate concern and, accordingly, areas where the deal could incorporate those concerns. What’s emerged from the talks suggests that the TPP will indeed live up to Mr. Obama’s promise of a “21St-century” agreement: one that anchors the United States in a key region for decades to come, while increasing the scope of trade policy beyond just tariffs.

Difficult as it has been to reach this point, the last leg-final passage for the TPP in both houses of Congress during an election year could prove even more difficult. Republican Donald Trump and Independent-running-as­ Democrat Bernie Sanders have been whipping up protectionist sentiment against the TPP even before they knew what would be in it. Over the course of the next few months, the public and Congress will have an opportunity to pore over the pact. If its details prove to be as advertised, people are likely to conclude that the benefits of the deal outweigh its risks. For now, though, it’s enough to note the fact that Washington can still get something done, and to celebrate that.”

On October 7th, Hilary Clinton, however, announced her opposition to the TPP in an interview with Judy Woodruff for PBS’s “News Hour” program. She stated:

“What I know about it, as of today, I am not in favor of what I have learned about it. I don’t believe it’s going to meet the high bar I have set.”

She cited weakness on currency manipulation and failures with the FTA with Korea. While Secretary of State, Clinton had predicted TPP would be the “gold standard” of free trade agreements and firmly supported it numerous times, but the pressure of the primary, in particular, attacks by Bernie Sanders have pushed her more to the left of the Party and to oppose the Agreement. Labor unions, whose endorsements she is seeking, are united against it, as are the vast majority of Congressional Democrats. Only 28 House Democrats, and 13 in the Senate, voted for the fast-track bill.

On October 7th, in response to Hilary Clinton’ s statement on TPP, Paul Ryan, Chairman of House Ways and Means, stated on MSNBC:

“I wrote TPA so that Congress would have the tools and the public would have the ability to see what’s in this agreement. I am for free trade agreements, but I’m for very good free trade agreements. I have yet to decide… if this is a very good free trade agreement because I haven’t read it yet, so I just do not know the answer to your question, Chuck. But I’m holding judgment; I’m hopeful, but there are some concerns I have with some of the provisions in here, and quite frankly, we want to see what it is on net,…but it’s going to take some time to scrub through this agreement, to render final judgment.”

“I find it interesting that a person who is seeking to run for the Presidency of the United States, who was in favor of it before, say Hillary Clinton, that she hasn’t even read yet. It’s an enormous agreement and I think we need to be cautious about it. I think we need to do our jobs and read what’s in here.”

For Ryan’s full statement, see http://www.msnbc.com/mtp-daily/watch/ryan-backs-mccarthy-despite-benghazi-slip-540513347596.

On October 8, 2015, the Washington Post in an editorial stated that Hilary Clinton’s stance on the TPP was “disappointing”:

“Bowing to pressure from the Democratic Party’s ascendant protectionist wing, would-be presidential nominee Hillary Clinton has come out against President Obama’s freshly negotiated Trans-Pacific Partnership (TPP) trade agreement. The most hopeful thing to be said about this deeply disappointing abandonment of the president she served, and the internationalist tendency in Democratic ideology she once embodied, is that it is so transparently political. There is no way that Ms. Clinton can oppose the 12-nation deal on its merits.

In part, that’s because she doesn’t know all the details, as she acknowledged. More to the point, the reasons she offered for her view could not have been convincing, even to her. There was nothing in the deal about alleged currency manipulation by U.S. trading partners, she complained. Yet the biggest manipulator, China, isn’t a party to the pact. As the Obama administration argued, trade pacts by definition deal with tariffs and the like, not monetary policy; currency rules might have been construed to limit the Federal Reserve’s options unduly. . . .

And of course, Ms. Clinton’s opposition to the TPP flies in the face of her repeated statements to the opposite effect when she was Mr. Obama’s secretary of state — and after. . . .Ms. Clinton understood then, the TPP was not only about economics but also about geopolitics.

It’s particularly crucial to Mr. Obama’s essential effort to strengthen U.S. ties to Japan and other East Asian nations, thus counterbalancing China, a “rebalance” for which Ms. Clinton once proudly claimed some authorship.

To be sure, Ms. Clinton salted her anti-TPP statement with qualifiers . . .

And so on. In other words, there is still a chance that later on, if or when she’s president, and it is to her advantage, she may discover some decisive good point in the TPP that would let her take a different position without, technically, contradicting herself. Cynical? Perhaps, but as we said, that’s the hope.”

For full editorial, see https://www.washingtonpost.com/opinions/ms-clinton-avoids-the-hard-choice-on-the-trans-pacific-partnership/2015/10/08/a795a0cc-6df6-11e5-9bfe-e59f5e244f92_story.html

On October 9th, John Brinkley at Forbes in article entitled Hillary Clinton’s Flip-Flop On TPP Comes Amid Shift In Washington On Free Trade, stated:

“To borrow a phrase from Alice in Wonderland, the politics of trade are getting curiouser and curiouser.

Shortly after the 12 governments that are parties to the Trans-Pacific Partnership announced they had arrived at a deal, Hillary Clinton announced that she opposed it. The timing suggests that she came out against it not because she thought it was, on balance, a bad deal for Americans, but because she determined that supporting it would cost her more votes than opposing it would.

Now, all three major Democratic presidential candidates – Clinton, Vermont Sen. Bernie Sanders and former Maryland Gov. Martin O’Malley – are against the TPP, which is one of President Obama’s signature foreign policy goals. Sanders and O’Malley have always opposed free trade. Clinton had always supported it – until she became a presidential candidate.

Earlier, two Republican senators who historically have voted in favor of free trade agreements said they weren’t so sure about this one. . . .

These position changes don’t represent a sea-change in the way politicians view free trade. Hatch and McConnell objection to sections of that offend the corporate CEOs and country club Republicans they so nobly represent.

But it does seem that the spectrum of American support for free trade is getting narrower. It used to be that almost all congressional Republicans and most moderate Democrats were reliable yes votes for free trade agreements. Not anymore.

Tea Party Republicans oppose the TPP and free trade in general. But now, their animus seems to be seeping into the mainstream of the Republican Party. Pro-labor Democrats have opposed free trade all the way back to NAFTA. But now, some of the more moderate members of the Democratic Party are starting to look askance at the TPP.

The first sign of this appeared in June, when the House passed a Trade Promotion Authority bill last June by only eight votes.

Optimists hope the 219-211 vote by which the House voted to approve TPA will hold up for the TPP vote. Maybe it will, but the TPP vote will take place in an election year and the TPA vote didn’t. . . .

A long-term reason is that the anti-free trade forces are better at selling their case to the American public than the pro-free trade camp is. The former appeals to their emotions, the latter to their intellects. . . .

So, you can see why pro-trade Democrats who voted for TPA might be reluctant to support the TPP. And, they have an easy way out: their access to the TPP text was restricted during the negotiations. When the final text is posted publicly, they can read it and say, “OMG, I didn’t know THAT was in there!”

“Those of us who think this (agreement) is good were late the party,” Rosenberg said. Not only were they late, they didn’t bring anything good to eat or drink.

“The chances of our losing this have to be a clear and present danger for all of us,” he said.”

For the full article, see http://www.forbes.com/sites/johnbrinkley/2015/10/09/politics-of-trade-arent-what-they-used-to-be/print/.

During the Democratic debate on October 13, 2015, Hilary Clinton stated that she had read the TPP, which created a lot head scratching at the White House because the final TPP Agreement has not been released to the public and some aspects, such as currency manipulation, are still being negotiated.

President Obama has been clear on his support for the Agreement:

“When more than 95 percent of our potential customers live outside our borders, we can’t let countries like China write the rules of the global economy. We should write those rules, opening new markets to American products while setting high standards for protecting workers and preserving our environment.”

One surprise came on October 5, 2015 when the Treasury announced that, in addition to lowering trade barriers, the 12 Trans-Pacific Partnership member nations would “strengthen macroeconomic cooperation, including on exchange rate issues, in appropriate fora.” The 12 countries are discussing a possible arrangement for senior finance ministry and central bank officials to meet periodically. As indicated in more detail below, Congress put considerable pressure on the Obama administration last spring to insist on an enforceable currency provision in the trade pact. But the administration and the Federal Reserve fought back, saying that it might someday be used against American policy makers to limit their flexibility to set short-term interest rates and adopt other monetary measures.

At the same time, US trade officials have suggested that the TPP could be a model for an eventual deal with China. China has emerged as the largest foreign investor in many Asian countries as well as the biggest exporter to them, and that has given China a stake in greater openness and an interest in TPP. See Article below from Chinese Trade lawyer about TPP.

On October 6, 2015, The Wall Street Journal in an editorial entitled The Pacific Trade Stakes stated:

“it would be an historic loss if the pact failed because U.S. negotiators bowed too far to protectionist forces, as some early signals suggest TPP will eliminate or reduce about 18,000 tariffs, taxes and non-tariff barriers like quotas, and there’s no denying the pro-growth gains, especially for U.S. goods and services. America already has low tariffs on most products, so this will do more to open up the foreign markets to which 44% of U.S. goods exports now flow.

The U.S. enjoys big comparative advantages in agriculture (soybeans, fruit, corn) and high-value manufacturing like aerospace, computer equipment, auto parts, organic chemicals and more recently oil and gas. Other domestic winners include software, insurance and finance.

Planks that deal with non-discriminatory market access for investment and cross-border services are also useful, as is a provision to protect the free movement of data and information as digital markets mature. TPP includes innovative mechanisms to promote the development of production and supply chains, such as requiring some yarns and fabrics for apparel to be sourced from a TPP member. . . .

No labor or environmental safeguards can win over the Bernie Sanders left, while the Donald Trump right doesn’t care about specifics like IP. Their opposition is implacable and will be amplified by the presidential campaign.

To ratify the pact, President Obama really needs the support of free traders like Orrin Hatch, who said TPP “appears to fall woefully short.” We hope he’s wrong and that the Administration negotiated enough liberalization to deserve his support. Yet the Utah Senator and the three other bipartisan chairmen and ranking members of the Senate Finance and Ways and Means committees joined on a letter last week importuning negotiators “to take the time necessary to get the best deal possible for the United States.” .

If the Administration prioritized speed over substance to get TPP done on Mr. Obama’s watch and capitulated too soon on biotech and elsewhere, the danger is that free traders will defect—and there is little margin for error. The fast-track trade promotion bill passed the House 218-206 and the Senate 60-38.

TPP probably won’t come to a vote until after the 2016 election. Congress should use the time to carefully vet the chapters and ensure that the pact complies with the 150 or so congressionally mandated “negotiating objectives” built into fast track. Mr. Obama will also need to start persuading the Congress with more than his usual Mr. Congeniality routine.

Nine and a half of every 10 of the world’s consumers resides somewhere other than America, so arrangements like the TPP that break down obstacles to trade and investment are crucial to prosperity at home. The question is whether this TPP is the best the U.S. can do.”

INDIA MOANS THAT IT IS OUT AND CHINA WANTS IN

Meanwhile India moans that it is out, but China wants in. On October, 6, 2015, the Wall Street Journal also reported in an article about India lagging other nations in lowering trade barriers and the impact of the TPP on India:

“As more of its biggest trading partners stitch together their economies into low-tariff blocs, India risks getting edged out of key markets at a time when Prime Minister Narendra Modi is trying to rev up economic growth and further integrate his country into global supply chains.

A senior official in India’s Commerce Ministry said Tuesday that New Delhi didn’t want to join the new partnership and is worried the deal could slow WTO trade negotiations.

“WTO will lose much of its steam because the U.S. won’t have the appetite for it anymore” as it focuses on the Trans-Pacific Partnership, the official said. “Nothing of the development agenda in the current round of talks [in the WTO] will be taken seriously.” . . . .

The Trans-Pacific Partnership, if approved by member governments, could make India less competitive in some of the world’s largest markets. A study last year by the Indian Institute of Foreign Trade found that the pact would harm India’s exports, particularly in textiles, clothing and leather products, as countries such as Vietnam and Malaysia get cheaper access to the U.S. and other markets covered by the deal. But the negative fallout would be limited, the researchers said, because India already has tariff agreements with several partnership nations, including Japan and Malaysia. . . .”

The Wall Street Journal also reported on October 5th that the TPP was a setback for China:

“China had been invited to join the trade group, but Beijing has been reluctant to comply with many of the required rules, such as opening up the financial sector. By not being a founding member, experts say, China misses the opportunity to help shape an important pillar of the global trading system—a priority for President Xi Jinping.

“The key is whether China’s domestic reforms will be enough or sufficient. If they are not, it will have to follow the U.S. and lose its chance with the TPP to help make the rules,” said Shi Yinhong, director of the Center on American Studies at Renmin University.

The trade deal is expected to help blunt Beijing’s efforts to chart its own course for the region. . . .

The world’s second-largest economy also misses out on a grouping that includes many technologically advanced countries at a time when it is working hard to introduce high tech innovation, analysts said. And its economy needs the pressure of foreign competition to give its stalled domestic reform agenda a push, as with the productivity burst China enjoyed after joining the World Trade Organization in 2001, they added.

Two years ago, Mr. Xi announced a broad overhaul to give markets greater sway in an effort to ward off a slowdown and shift the economy to services and consumption and away from industry. Restructuring, however, has been spotty, delayed by opposition from state companies, by the sharpness of the deceleration, corporate and local government debt and excess capacity in housing and industry. . . .

Beijing could face significant internal and external hurdles if it eventually moves to join the trade bloc, said University of Chicago professor Dali Yang, especially given concern among some that it hasn’t always followed the rules since joining the WTO. Even inside China, there is growing recognition that China’s somewhat capricious system—where regulations can be applied arbitrarily and state-owned companies still dominate large swaths of the economy—makes membership unlikely soon, he added.

“The Chinese economy needs a jolt. It really needs reform,” Mr. Yang said. “Many feel the TPP was borne out of a frustration after the WTO, that China went back on its word in telecommunication, for instance, by not letting foreigners have a major stake.”

On October 8th Commerce Minister Gao Hucheng of MOFCOM, China’s Ministry of Commerce, stated that China will evaluate the impact of the TPP based on the official text of the treaty and hopes it will complement other agreements, stating:

“China hopes the TPP pact and other free trade arrangements in the region can boost each other and contribute to the Asia-Pacific’s trade, investment and economic growth.

Chinese officials have stated that they would need to see the agreement enter into force and be in effect for several years before deciding whether it would be worthwhile for China to make all the legal and policy changes necessary to meet the commitments in the agreement and attempt to accede to the TPP.”

On October 6, 2015, in the attached article entitled Trans-Pacific Partnership and China’s Trade Strategy,Trans-Pacific Partnership and China’s Trade Strategy _ Zhaokang JIANG _ Link , Zhaokang Jiang, a well-known Chinese trade lawyer, states:

“As the result of a high-standard, ambitious, comprehensive agreement promoting economic growth; enhancing innovation, productivity and competitiveness; raising living standards; reducing poverty in our countries; and promoting transparency, good governance, and enhancing labor and environmental protections, the TPP will be an important step toward the ultimate goal of open trade and regional integration across the region and setting the example rules for the global commerce. . . .

The current TPP members cover 40% of the global trade, and 36% of the world GDP. Once the pact is ratified and signed into laws by the members for implementation, more regional economies such as Korea, Philippines, Thailand, and Taiwan will have a chance to join. The TPP will also serve as a good example for additional trade negotiations, such as the Transatlantic Trade and Investment Partnership (“TTIP”), and even the WTO further negotiations. Since international trade is intertwined, the long term significance of the TPP shall not be downplayed, even for the non-member economies and other regions.

Since 1980’s, China has been the beneficiary and contributing party of trade globalization, liberalization and regional economic boom, and shall continue to welcome opportunities and accept the challenges in positive and active thinking, decision-making and behavior. In addition to the bilateral trade pacts, we believe China should seize this chance and embrace the TTP to more deeply participate in the regional trade arrangement, play more significant roles and enjoy more benefits. China should review and study the pact diligently and carefully and prepare to negotiate and join the regional trade deal for a beneficial trade growth.

At the same time, China can use this to adopt best practices for domestic reforms as they did in 2000 when it negotiated the WTO entry deal.

While details of the TPP are emerging in the near future, in additional to the general principles of rule of law, transparency, nondiscrimination, national treatment, the most-favored nation treatment, “minimum standard of treatment”, “negative list”, and due process, the Chinese side at least needs to focus the following key areas, for which the Chinese rules may have significant gaps . . . .

China, as the second largest economy of the world, is left out of the landmark trade deal, but the door is still open, and the future is in the hands of the Chinese leadership.

We hope China will take this rare opportunity in decades to review and accept the internationally recognized values, rules, and procedures for free and fair trade, enhance the trade, economic and legal reforms in China, collaborate with the trade partners, overcome the difficulties of economic and social changes, and finally reach the goal of being a nation of sustainable development, modernization, rule of law and democracy for the better-off of the people.”

TRANS PACIFIC PARTNERSHIP FINALIZED IN ATLANTA ROUND

On October 5, 2015, in Atlanta, Georgia, Trade ministers from the U.S. and 11 other nations, including Japan, Canada, Mexico, Australia, New Zealand, Vietnam and Malaysia, announced the agreement on the Trans-Pacific Partnership, which will link up 40 percent of the world’s economy, following an exhausting round of last-minute negotiations that stretched over the weekend.

The scheduled two day session was extended by three days to deal with a number of contentious issues, including commercial exclusivity for biologic pharmaceuticals, automotive issues and market access for dairy products.

President Obama cannot sign the Agreement for a minimum of 60 days after the Agreement is published publicly. Congress cannot consider and pass the Agreement for a minimum of 30 days, after the 60 days, which places Congressional passage possibly in January. The process formally begins when President Barack Obama notifies Congress that he intends to sign the agreement and publishes it. From there, the administration will continue working to brief lawmakers on the contents of the agreement.

In response to the Agreement, Senate Finance Committee Chairman Orrin Hatch stated:

“A robust and balanced Trans-Pacific Partnership agreement holds the potential to enhance our economy by unlocking foreign markets for American exports and producing higher-paying jobs here at home. But a poor deal risks losing a historic opportunity to break down trade barriers for American made products with a trade block representing 40 percent of the global economy. Closing a deal is an achievement for our nation only if it works for the American people and can pass Congress by meeting the high-standard objectives laid out in bipartisan Trade Promotion Authority. While the details are still emerging, unfortunately I am afraid this deal appears to fall woefully short. Over the next several days and months, I will carefully examine the agreement to determine whether our trade negotiators have diligently followed the law so that this trade agreement meets Congress’s criteria and increases opportunity for American businesses and workers. The Trans-Pacific Partnership is a once in a lifetime opportunity and the United States should not settle for a mediocre deal that fails to set high-standard trade rules in the Asia-Pacific region for years to come.”

Emphasis added.

Predictably, as soon as the deal was announced, Democratic Senator Bernie Sanders, who is running for President and bound at the hip with the labor unions, stated that the new trade deal was “disastrous,” and that he would work to defeat it. As Sanders further stated:

Wall Street and other big corporations have won again. It is time for the rest of us to stop letting multinational corporations rig the system to pad their profits at our expense. In the Senate, I will do all that I can to defeat this agreement. We need trade policies that benefit American workers and consumers, not just the CEOs of large multinational corporations.

On October 5th, Chairman Paul Ryan of the House Ways and Means Committee issued a press release, stating:

“A successful Trans-Pacific Partnership would mean greater American influence in the world and more good jobs at home. But only a good agreement—and one that meets congressional guidelines in the newly enacted Trade Promotion Authority—will be able to pass the House. I am reserving judgment until I am able to review the final text and consult with my colleagues and my constituents. In particular, I want to explore concerns surrounding the most recent aspects of the agreement. I’m pleased that the American people will be able to read it as well because TPA requires, for the first time ever, the administration to make the text public for at least 60 days before sending it to Congress for consideration. The administration must clearly explain the benefits of this agreement and what it will mean for American families. I hope that Amb. Froman and the White House have produced an agreement that the House can support.”

On October 4th and 5th, the United States Trade Representative issued the attached summary of the Trans Pacific Partnership. Summary of the Trans-Pacific Partnership Agreement _ United States Trade Rep  Some of the salient parts of the Summary are as follows:

Summary of the Trans-Pacific Partnership Agreement

On October 4, 2015, Ministers of the 12 Trans-Pacific Partnership (TPP) countries – Australia, Brunei Darussalam, Canada, Chile, Japan, Malaysia, Mexico, New Zealand, Peru, Singapore, United States, and Vietnam – announced conclusion of their negotiations. The result is a high-standard, ambitious, comprehensive, and balanced agreement that will promote economic growth; support the creation and retention of jobs; enhance innovation, productivity and competitiveness; raise living standards; reduce poverty in our countries; and promote transparency, good governance, and enhanced labor and environmental protections. We envision conclusion of this agreement, with its new and high standards for trade and investment in the Asia Pacific, as an important step toward our ultimate goal of open trade and regional integration across the region.

KEY FEATURES

Five defining features make the Trans-Pacific Partnership a landmark 21st-century agreement, setting a new standard for global trade while taking up next-generation issues. These features include:

Comprehensive market access. The TPP eliminates or reduces tariff and non-tariff barriers across substantially all trade in goods and services and covers the full spectrum of trade, including goods and services trade and investment, so as to create new opportunities and benefits for our businesses, workers, and consumers.

Regional approach to commitments. The TPP facilitates the development of production and supply chains, and seamless trade, enhancing efficiency and supporting our goal of creating and supporting jobs, raising living standards, enhancing conservation efforts, and facilitating cross-border integration, as well as opening domestic markets.

Addressing new trade challenges. The TPP promotes innovation, productivity, and competitiveness by addressing new issues, including the development of the digital economy, and the role of state owned enterprises in the global economy.

Inclusive trade. The TPP includes new elements that seek to ensure that economies at all levels of development and businesses of all sizes can benefit from trade. It includes commitments to help small- and medium-sized businesses understand the Agreement, take advantage of its opportunities, and bring their unique challenges to the attention of the TPP governments. It also includes specific commitments on development and trade capacity building, to ensure that all Parties are able to meet the commitments in the Agreement and take full advantage of its benefits.

Platform for regional integration. The TPP is intended as a platform for regional economic integration and designed to include additional economies across the Asia-Pacific region.

SCOPE

The TPP includes 30 chapters covering trade and trade-related issues, beginning with trade in goods and continuing through customs and trade facilitation; sanitary and phytosanitary measures; technical barriers to trade; trade remedies; investment; services; electronic commerce; government procurement; intellectual property; labour; environment; ‘horizontal’ chapters meant to ensure that TPP fulfils its potential for development, competitiveness, and inclusiveness; dispute settlement, exceptions, and institutional provisions.

In addition to updating traditional approaches to issues covered by previous free trade agreements (FTAs), the TPP incorporates new and emerging trade issues and cross-cutting issues. These include issues related to the Internet and the digital economy, the participation of state-owned enterprises in international trade and investment, the ability of small businesses to take advantage of trade agreements, and other topics.

TPP unites a diverse group of countries – diverse by geography, language and history, size, and levels of development. All TP